Bug#301486: kernel-image-2.6.8-2-generic: Aiee, killing interrupt handler!

[Norbert Tretkowski <tretkowski@inittab.de>]

* Florian Hars wrote:
> Loading qlogicisp module.
> ERROR: SCSI host `isp1020' has no error handling
> ERROR: This is not a safe way to run your SCSI host
> ERROR: The error handling must be added to this driver
> fffffc000fb2bdf8 fffffffc00385db0 fffffffc0026a390 fffffffc00386968 
>        fffffffc00386968 fffffc000febb800 fffffffc00386968 0000000000000000 
>        fffffc0000000000 fffffc000fb2be40 fffffc000fb2be40 fffffc000febb800 
>        fffffffc00370047 fffffffc00386968 fffffffc0037a08c fffffffc00386968 
>        fffffc000059e800 0000000000000000 fffffffc0026204c fffffffc00386968 
>        fffffc000059e800 fffffffc00386a48 fffffc000059e800 fffffc000059c778 
> Trace:
> [<fffffc000034ddcc>] sys_init_module+0x1cc/0x3d0
> [<fffffc0000315244>] entSys+0xa4/0xc0
> 
> qlogicisp : new isp1020 revision ID (5)
> scsi0 : QLogic ISP1020 SCSI on PCI bus 01 device 20 irq 27 I/O base 0x8000
[...]
> qla1280: QLA1040 found on PCI bus 1, dev 4
> Unable to handle kernel paging request at virtual address 00000000000001c8
> swapper(0): Oops 1

Why are you loading both, qlogicisp _and_ qla1280 on boot? Disabling
the qlogicisp module should fix your problem.

Unfortunately I had no time to modify initrd-tools so qla1280 is used
for ISP1020 controllers.

Norbert