Re: Bug#296544: kernel-image-2.6.8-2-686: i get many scsi: unknown opcode 0x80 messages from the kernel

[Guido Haase <guido@haase-it.de>]

Hello,

I noticed the same behavior after moving from kernel-image-2.6.8-1-386
(Ver. 10) to kernel-image-2.6.8-2-686 (Ver. 13). I didn't install the 
smartmontools so far but, nevertheless the "scsi: unknown opcode 0x80" 
error message appears since changing the kernel image.

I'm using a 3ware 8006-2LP PCI SATA RAID controller. The error message 
doesn't appear before moving to kernel-image-2.6.8-2-686 (Ver. 13).

Here are some data, maybe they are helpfull:

# cat /proc/scsi/scsi

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: 3ware    Model: Logical Disk 0   Rev: 1.2
  Type:   Direct-Access                    ANSI SCSI revision: ffffffff


# lspci

0000:02:05.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID 
(rev 01)


# cat /proc/version

Linux version 2.6.8-2-686 (dilinger@toaster.hq.voxel.net) (gcc version
3.3.5 (Debian 1:3.3.5-6)) #1 Mon Jan 24 03:58:38 EST 2005

# dmesg

scsi: unknown opcode 0x80
.
.
.
scsi: unknown opcode 0x80


# tw_cli

3ware CLI> info c0
Controller: c0
-------------
Driver:   1.26.00.039
Model:    8006-2LP
FW:       FE8S 1.05.00.068
BIOS:     BE7X 1.08.00.048
Monitor:  ME7X 1.01.00.040
Serial #: F18501A4450328
PCB:      Rev5
PCHIP:    1.30-66
ACHIP:    3.20

# of units: 1
        Unit 0: RAID 1 76.33 GB ( 160084480 blocks): OK

# of ports: 2
        Port 0: Maxtor 6Y080M0 Y2CYE20E 76.33 GB (160086528 blocks): 
OK(unit 0)
        Port 1: Maxtor 6Y080M0 Y2CYECPE 76.33 GB (160086528 blocks): 
OK(unit 0)


Greetinx

Guido Haase <guido@haase-it.de>                     www.haase-it.de