Bug#292478: oops on boot with usb cdburner attached
If I unplug the usb burner,
it does boot; so I guess it is the same bug. But here, 2.6.7 boots great
with burner (and burns great). Only with 2.6.8 the trouble crept in.
I'm sitting on a DELL Latitude D400, and here I attach the whole dmesg.
Of cause, I boot without usb-burner; and attach the device later, so
that you know its details (scroll down):
[...]
As of today, this is no longer true.
I boot, usb detached, and attach after boot:
[...]
eth0: no IPv6 routers present
eth1: no IPv6 routers present
[drm] Initialized i830 1.3.2 20021108 on minor 0: Intel Corp.
82852/855GM Integrated Graphics Device
[drm] Initialized i830 1.3.2 20021108 on minor 1: Intel Corp.
82852/855GM Integrated Graphics Device (#2)
mtrr: base(0xf0020000) is not aligned on a size(0x753000) boundary
drivers/usb/input/hid-input.c: event field not found
usb 4-5.1: USB disconnect, address 3
usb 4-5.1: new low speed USB device using address 5
usbhid: probe of 4-5.1:1.0 failed with error -5
input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on
usb-0000:00:1d.7-5.1
usb 4-5: USB disconnect, address 2
usb 4-5.1: USB disconnect, address 5
drivers/usb/input/hid-core.c: can't resubmit intr,
0000:00:1d.7-5.2/input0, status -19
usb 4-5.2: USB disconnect, address 4
usb 4-5: new high speed USB device using address 6
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
usb 4-5.1: new low speed USB device using address 7
input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on
usb-0000:00:1d.7-5.1
drivers/usb/input/hid-core.c: ctrl urb status -32 received
input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on
usb-0000:00:1d.7-5.1
usb 4-5.2: new low speed USB device using address 8
drivers/usb/input/hid-core.c: ctrl urb status -32 received
input: USB HID v1.00 Mouse [413c:3010] on usb-0000:00:1d.7-5.2
usb 4-4: new high speed USB device using address 9
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: A101
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 9
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 4-4: USB disconnect, address 9
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 0 lun 0
sr 0:0:0:0: Illegal state transition cancel->offline
Badness in scsi_device_set_state at drivers/scsi/scsi_lib.c:1643
[<d0966db9>] scsi_device_set_state+0xc9/0x120 [scsi_mod]
[<d09646ce>] scsi_eh_offline_sdevs+0x6e/0x90 [scsi_mod]
[<d0964d1c>] scsi_unjam_host+0xcc/0x210 [scsi_mod]
[<c0118b30>] default_wake_function+0x0/0x20
[<d0964f68>] scsi_error_handler+0x108/0x1c0 [scsi_mod]
[<d0964e60>] scsi_error_handler+0x0/0x1c0 [scsi_mod]
[<c01042ad>] kernel_thread_helper+0x5/0x18
Unable to handle kernel paging request at virtual address 74735f74
printing eip:
c0203d73
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: usb_storage i830 ds thermal fan button processor ac
battery ipv6 eth1394 ohci1394 ieee1394 yenta_socket pcmcia_core
snd_intel8x0m snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss
snd_pcm snd_timer snd_page_alloc gameport snd_mpu401_uart snd_rawmidi
snd_seq_device snd soundcore pci_hotplug ehci_hcd intel_agp agpgart rtc
pcspkr psmouse tsdev mousedev joydev evdev usbhid uhci_hcd usbcore
ipw2100 ieee80211 ieee80211_crypt tg3 firmware_class capability
commoncap ide_cd sr_mod scsi_mod cdrom isofs ext2 ext3 jbd mbcache
ide_generic piix ide_disk ide_core unix font vesafb cfbcopyarea
cfbimgblt cfbfillrect
CPU: 0
EIP: 0060:[<c0203d73>] Not tainted
EFLAGS: 00010083 (2.6.8-2-686)
EIP is at as_requeue_request+0x93/0xf0
eax: 74735f74 ebx: 00000000 ecx: cfb2602c edx: cfb438b0
esi: cfb438b0 edi: cf9d4540 ebp: 00000202 esp: c8ea5ee0
ds: 007b es: 007b ss: 0068
Process scsi_eh_0 (pid: 6217, threadinfo=c8ea4000 task=c85d78b0)
Stack: c012c64e 00000000 00000000 c0106cfd cfb438b0 cde3a800 cfb2602c
c01fb276
cfb2602c cfb438b0 cfb438b0 cde3a800 c01fdbfd cfb2602c cfb438b0
c802fca8
00000286 c802fc40 cde3a800 cf5c0a00 00001057 d096532b cfb2602c
cfb438b0
Call Trace:
[<c012c64e>] __kernel_text_address+0x2e/0x40
[<c0106cfd>] print_context_stack+0x2d/0x70
[<c01fb276>] elv_requeue_request+0x26/0x60
[<c01fdbfd>] blk_insert_request+0xdd/0xe0
[<d096532b>] scsi_queue_insert+0x8b/0xe0 [scsi_mod]
[<d0964bc2>] scsi_eh_flush_done_q+0x72/0x100 [scsi_mod]
[<d0964ce8>] scsi_unjam_host+0x98/0x210 [scsi_mod]
[<c0118b30>] default_wake_function+0x0/0x20
[<d0964f68>] scsi_error_handler+0x108/0x1c0 [scsi_mod]
[<d0964e60>] scsi_error_handler+0x0/0x1c0 [scsi_mod]
[<c01042ad>] kernel_thread_helper+0x5/0x18
Code: 8b 10 89 72 04 89 16 89 46 04 89 30 8b 5c 24 10 89 7c 24 20
<6>note: scsi_eh_0[6217] exited with preempt_count 1
Uwe
Reply to: