[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Intel Ethernet Pro/1000

Hi.

we have an Intel  SE7501BR2 motherboard with two integrated network connections, one Intel PRO/100 and one Intel PRO/1000.

We have installed debian sarge and now we run the kernel 2.6.8.
The Intel PRO/100 is working fine with the e100 driver,
but the Intel PRO/1000 is not detected.

I run
  modprobe e1000
and get the following lines in /var/log/messages

Intel(R) PRO/1000 Network Driver - version 5.6.10.1
Copyright (c) 1999-2004 Intel Corporation.

but, it seems that the network interface is not detected:
lspci
gives
 0000:00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
 0000:00:00.1 ff00: Intel Corp. E7500/E7501 Host RASUM Controller (rev 01)
 0000:00:03.0 PCI bridge: Intel Corp. E7500/E7501 Hub Interface C PCI-to-PCI Bridge (rev 01)
 0000:00:03.1 ff00: Intel Corp. E7500/E7501 Hub Interface C RASUM Controller (rev 01)
 0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
 0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
 0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42)
 0000:00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02)
 0000:00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 02)
 0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
 0000:01:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
 0000:01:08.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
 0000:01:0c.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
 0000:02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
 0000:02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
 0000:02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
 0000:02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
 0000:03:01.0 RAID bus controller: Intel Corp. RAID Controller

Is that a driver problem or a hardware problem?

Thanks.

R. Amer
Polythecnic University of Catalonia
Reply to: