Bug#277083: xcdroast not working exclusively on 2.6.8-4
Package: kernel-image-2.6.8-1-686
Version: 2.6.8-4
Since about when I (was) upgraded from 2.6.8-3 to -4, I cannot record
any longer with xcdroast.
When I simply restart 2.6.3-2, everything works fine.
This looks utmost strange to me. Here are the outputs:
This is what I get under 2.6.8-4:
Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORD dev= "ATAPI:0,1,0"
gracetime=2 fs=4096k driveropts=burnfree -v -useinfo speed=24 -dao
-eject -pad -data "/toast/track-01.iso" ...
scsidev: 'ATAPI:0,1,0'
devname: 'ATAPI'
scsibus: 0 target: 1 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
SCSI buffer size: 64512
Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
cdrecord: Drive does not support SAO recording.
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
cdrecord: Illegal write mode for this drive.
and thus may have bugs that are not present in the original version.
(End with 'Error Writing Tracks')
This is what I get under 2.6.3-2:
Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORD dev= "ATAPI:0,1,0"
gracetime=2 fs=4096k driveropts=burnfree -v -useinfo speed=24 -dao
-eject -pad -data "/toast/track-01.iso" ...
scsidev: 'ATAPI:0,1,0'
devname: 'ATAPI'
scsibus: 0 target: 1 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
SCSI buffer size: 64512
Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to
<cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'TEAC '
Identifikation : 'CD-W224E '
Revision : 'L.0E'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1493520 = 1458 KB
FIFO size : 4194304 = 4096 KB
pregap1: -1
Track 01: data 696 MB padsize: 30 KB
Total size: 799 MB (79:15.00) = 356625 sectors
Lout start: 800 MB (79:17/00) = 356625 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 3221
Starting to write CD/DVD at speed 24 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: writing 30 KB of pad data.
Track 01: Total bytes read/written: 730337280/730368000 (356625 sectors).
Writing time: 389.667s
Average write speed 12.7x.
Min drive buffer fill was 79%
Fixating...
Fixating time: 15.477s
cdrecord: fifo had 11504 puts and 11504 gets.
cdrecord: fifo was 0 times empty and 8000 times full, min fill was 92%.
(Ends with properly burnt CDROM).
Reply to: