Bug#282798: kernel: Hang under disk load with Promise SATA controller
reassign 282798 kernel-source-2.6.8
thanks
On Wed, Nov 24, 2004 at 05:06:18PM +0100, Lionel Elie Mamane wrote:
> Package: kernel
>
> With newer kernels, my system hangs as soon as "serious" disk activity
> happens (like a "find /" or the daily backup script).
>
> Problem does _not_ happen with 2.6.5, which ran stable uninterrupted
> for 31 weeks.
> Problem _does_ happen with kernel compiled from kernel-source
> 2.6.9-2.
>
> The machine is an AMD64 Opteron machine, with Promise SATA controller
> and RAID array of two disks. The kernels are 64bit kernels compiled in
> a 64bit chroot.
>
> It is a very hard hang: Magic SysRQ key is not responding any more.
>
> Just before the hang, I get on the console, e.g.:
>
> -------------------------- Begin console msg --------------------
> ata1: command timeout
>
> CPU0: Machine Check Exception 4 Bank 4b200000000070F0F
> TSC 67743769F7
> --------------------------- End console msg ---------------------
>
> Information on the machine:
>
> lionelm@harif:~$ lspci
> 0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
> 0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev f6)
> 0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
> 0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
> 0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
> 0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
> 0000:00:05.0 Ethernet controller: nVidia Corporation nForce3 Ethernet (rev a5)
> 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
> 0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
> 0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
> 0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
> 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> 0000:01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
> 0000:01:08.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) (rev 02)
> 0000:01:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
> 0000:02:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
> 0000:02:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
> lionelm@harif:~$ lspci -n
> 0000:00:00.0 0600: 10de:00d1 (rev a4)
> 0000:00:01.0 0601: 10de:00d0 (rev f6)
> 0000:00:01.1 0c05: 10de:00d4 (rev a4)
> 0000:00:02.0 0c03: 10de:00d7 (rev a5)
> 0000:00:02.1 0c03: 10de:00d7 (rev a5)
> 0000:00:02.2 0c03: 10de:00d8 (rev a2)
> 0000:00:05.0 0200: 10de:00d6 (rev a5)
> 0000:00:06.0 0401: 10de:00da (rev a2)
> 0000:00:08.0 0101: 10de:00d5 (rev a5)
> 0000:00:0a.0 0604: 10de:00dd (rev a2)
> 0000:00:0b.0 0604: 10de:00d2 (rev a4)
> 0000:00:18.0 0600: 1022:1100
> 0000:00:18.1 0600: 1022:1101
> 0000:00:18.2 0600: 1022:1102
> 0000:00:18.3 0600: 1022:1103
> 0000:01:06.0 0200: 10ec:8139 (rev 10)
> 0000:01:08.0 0104: 105a:3373 (rev 02)
> 0000:01:09.0 0c00: 104c:8023
> 0000:02:00.0 0300: 1002:5964 (rev 01)
> 0000:02:00.1 0380: 1002:5d44 (rev 01)
>
> lionelm@harif:~$ cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: Maxtor 6Y120M0 Rev: 1.02
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: Maxtor 6Y120M0 Rev: 1.02
> Type: Direct-Access ANSI SCSI revision: 05
>
> Extracts from dmesg (with 2.6.5):
>
> libata version 1.02 loaded.
> sata_promise version 0.91
> ata1: SATA max UDMA/133 cmd 0xFFFFFF0001071200 ctl 0xFFFFFF0001071238 bmdma 0x0 irq 5
> ata2: SATA max UDMA/133 cmd 0xFFFFFF0001071280 ctl 0xFFFFFF00010712B8 bmdma 0x0 irq 5
> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f
> ata1: dev 0 ATA, max UDMA/133, 240121728 sectors
> ata1: dev 0 configured for UDMA/133
> scsi0 : sata_promise
> ata2: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f
> ata2: dev 0 ATA, max UDMA/133, 240121728 sectors
> ata2: dev 0 configured for UDMA/133
> scsi1 : sata_promise
> Vendor: ATA Model: Maxtor 6Y120M0 Rev: 1.02
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: Maxtor 6Y120M0 Rev: 1.02
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
> SCSI device sda: drive cache: write through
> sda: sda1 < sda5 sda6 sda7 >
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
> SCSI device sdb: drive cache: write through
> sdb: sdb1 < sdb5 sdb6 sdb7 >
> Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
> Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
> Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
>
>
>
>
> --
> To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
--
Horms
Reply to: