Bug#274011: kernel-image-2.6.8-1-686: APM unable to power-off system.
Package: kernel-image-2.6.8-1-686
Version: 2.6.8-3
Severity: normal
After upgrading kernel-image-2.6.8-1-686 from 2.6.8-2 to 2.6.8-3, APM is
not able to power off my system after shutdown. I think it's related to
bug #273474.
Up to 2.6.8-2, the kernel was able to power down the system after
modprobe-ing apm and issuing "shutdown -h now".
(HALT=poweroff in /etc/default/halt)
In 2.6.8-3, the kernel says "Power down.", but the only noticeable
effect is the hard disk spinning down: system power stays on.
By comparing boot log messages, the major differences concern
- ACPI in 2.6.8-3 (used to tweak irq 9, unused afterwards)
- PNP reporting reserved I/O areas in 2.6.8-2, aborting in 2.6.8-3
- APM logging some error in 2.6.8-3 (unable to determine BIOS apm version?)
I hope the log excerpts can help you.
Best regards.
g.b.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-1-686
Locale: LANG=C, LC_CTYPE=C
Versions of packages kernel-image-2.6.8-1-686 depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii initrd-tools 0.1.74 tools to create initrd image for p
ii module-init-tools 3.1-pre5-7 tools for managing Linux kernel mo
-- no debconf information
syslogd 1.4.1#15: restart.
kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
kernel: Inspecting /boot/System.map-2.6.8-1-686
kernel: Loaded 27238 symbols from /boot/System.map-2.6.8-1-686.
kernel: Symbols match kernel version 2.6.8.
kernel: No module symbols loaded - kernel modules not enabled.
kernel: Linux version 2.6.8-1-686 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.4 (Debian 1:3.3.4-9)) #1 Sat Aug 28 14:11:39 EDT 2004
kernel: BIOS-provided physical RAM map:
kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
kernel: BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
kernel: BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
kernel: 0MB HIGHMEM available.
kernel: 255MB LOWMEM available.
kernel: On node 0 totalpages: 65520
kernel: DMA zone: 4096 pages, LIFO batch:1
kernel: Normal zone: 61424 pages, LIFO batch:14
kernel: HighMem zone: 0 pages, LIFO batch:1
kernel: DMI 2.1 present.
kernel: ACPI disabled because your bios is from 2000 and too old
kernel: You can enable it with acpi=force
kernel: Built 1 zonelists
kernel: Kernel command line: root=/dev/hda2 ro vga=307
kernel: Local APIC disabled by BIOS -- reenabling.
kernel: Found and enabled local APIC!
kernel: Initializing CPU#0
kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
kernel: Detected 551.379 MHz processor.
kernel: Using tsc for high-res timesource
kernel: Console: colour VGA+ 132x44
kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
kernel: Memory: 254624k/262080k available (1542k kernel code, 6752k reserved, 684k data, 148k init, 0k highmem)
kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
kernel: Calibrating delay loop... 1089.53 BogoMIPS
kernel: Security Scaffold v1.0.0 initialized
kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
kernel: CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
kernel: CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000
kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
kernel: CPU: L2 cache: 512K
kernel: CPU serial number disabled.
kernel: CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
kernel: Intel machine check architecture supported.
kernel: Intel machine check reporting enabled on CPU#0.
kernel: CPU: Intel Pentium III (Katmai) stepping 03
kernel: Enabling fast FPU save and restore... done.
kernel: Enabling unmasked SIMD FPU exception support... done.
kernel: Checking 'hlt' instruction... OK.
kernel: enabled ExtINT on CPU#0
kernel: ESR value before enabling vector: 00000000
kernel: ESR value after enabling vector: 00000000
kernel: Using local APIC timer interrupts.
kernel: calibrating APIC timer ...
kernel: ..... CPU clock speed is 551.0197 MHz.
kernel: ..... host bus clock speed is 100.0217 MHz.
kernel: checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
kernel: Freeing initrd memory: 1668k freed
kernel: NET: Registered protocol family 16
kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
kernel: PCI: Using configuration type 1
kernel: mtrr: v2.0 (20020519)
kernel: ACPI: Subsystem revision 20040326
kernel: ACPI: Interpreter disabled.
kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
kernel: PnPBIOS: Scanning system for PnP BIOS support...
kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00f60b0
kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf9e10:0x0, dseg 0xf0000
kernel: pnp: 00:08: ioport range 0x400-0x43f has been reserved
kernel: pnp: 00:08: ioport range 0x800-0x80f has been reserved
kernel: pnp: 00:08: ioport range 0x700-0x701 has been reserved
kernel: pnp: 00:08: ioport range 0x702-0x703 has been reserved
kernel: PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
kernel: PCI: Probing PCI hardware
kernel: PCI: Probing PCI hardware (bus 00)
kernel: VFS: Disk quotas dquot_6.5.1
kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
kernel: devfs: boot_options: 0x0
kernel: Initializing Cryptographic API
kernel: Limiting direct PCI/PCI transfers.
kernel: isapnp: Scanning for PnP cards...
kernel: isapnp: Card 'Crystal Codec'
kernel: isapnp: 1 Plug & Play card detected total
kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
kernel: NET: Registered protocol family 2
kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
kernel: TCP: Hash tables configured (established 16384 bind 32768)
kernel: NET: Registered protocol family 8
kernel: NET: Registered protocol family 20
kernel: RAMDISK: cramfs filesystem found at block 0
kernel: RAMDISK: Loading 1668 blocks [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^Hdone.
kernel: VFS: Mounted root (cramfs filesystem) readonly.
kernel: Freeing unused kernel memory: 148k freed
kernel: vesafb: probe of vesafb0 failed with error -6
kernel: NET: Registered protocol family 1
kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kernel: PIIX4: IDE controller at PCI slot 0000:00:07.1
kernel: PIIX4: chipset revision 1
kernel: PIIX4: not 100%% native mode: will probe irqs later
kernel: ide0: BM-DMA at 0x8430-0x8437, BIOS settings: hda:DMA, hdb:pio
kernel: ide1: BM-DMA at 0x8438-0x843f, BIOS settings: hdc:pio, hdd:pio
kernel: hda: Maxtor 91021U2, ATA DISK drive
kernel: Using anticipatory io scheduler
kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
kernel: hda: max request size: 128KiB
kernel: hda: 20010816 sectors (10245 MB) w/512KiB Cache, CHS=19852/16/63, UDMA(33)
kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
kernel: hdc: CD-ROM 48X/AKU, ATAPI CD/DVD-ROM drive
kernel: ide1 at 0x170-0x177,0x376 on irq 15
kernel: ext3: No journal on filesystem on hda2
kernel: hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
kernel: Uniform CD-ROM driver Revision: 3.20
kernel: Real Time Clock Driver v1.12
kernel: input: PC Speaker
kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
kernel: eth0: 0000:00:11.0, 00:00:E2:1E:9B:08, IRQ 10.
kernel: Receiver lock-up bug exists -- enabling work-around.
kernel: Board assembly 097172-016, Physical connectors present: RJ45
kernel: Primary interface chip i82555 PHY #1.
kernel: General self-test: passed.
kernel: Serial sub-system self-test: passed.
kernel: Internal registers self-test: passed.
kernel: ROM checksum self-test: passed (0x24c9f043).
kernel: Receiver lock-up workaround activated.
kernel: ip_conntrack version 2.1 (2047 buckets, 16376 max) - 296 bytes per conntrack
kernel: mice: PS/2 mouse device common for all mice
kernel: input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
kernel: pnp: Device 01:01.00 activated.
kernel: pnp: Device 01:01.02 activated.
kernel: pnp: Device 01:01.03 activated.
kernel: Capability LSM initialized
kernel: Adding 262136k swap on /swapfile. Priority:-1 extents:67
kernel: ip_tables: (C) 2000-2002 Netfilter core team
kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apmd[688]: apmd 3.2.1 interfacing with apm driver 1.16ac and APM BIOS 1.2
syslogd 1.4.1#15: restart.
kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
kernel: Inspecting /boot/System.map-2.6.8-1-686
kernel: Loaded 27239 symbols from /boot/System.map-2.6.8-1-686.
kernel: Symbols match kernel version 2.6.8.
kernel: No module symbols loaded - kernel modules not enabled.
kernel: Linux version 2.6.8-1-686 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.4 (Debian 1:3.3.4-11)) #1 Tue Sep 14 00:22:58 EDT 2004
kernel: BIOS-provided physical RAM map:
kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
kernel: BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
kernel: BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
kernel: 0MB HIGHMEM available.
kernel: 255MB LOWMEM available.
kernel: On node 0 totalpages: 65520
kernel: DMA zone: 4096 pages, LIFO batch:1
kernel: Normal zone: 61424 pages, LIFO batch:14
kernel: HighMem zone: 0 pages, LIFO batch:1
kernel: DMI 2.1 present.
kernel: ACPI disabled because your bios is from 2000 and too old
kernel: You can enable it with acpi=force
kernel: Built 1 zonelists
kernel: Kernel command line: root=/dev/hda2 ro vga=307
kernel: Local APIC disabled by BIOS -- reenabling.
kernel: Found and enabled local APIC!
kernel: Initializing CPU#0
kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
kernel: Detected 551.369 MHz processor.
kernel: Using tsc for high-res timesource
kernel: Console: colour VGA+ 132x44
kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
kernel: Memory: 254624k/262080k available (1542k kernel code, 6752k reserved, 684k data, 148k init, 0k highmem)
kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
kernel: Calibrating delay loop... 1089.53 BogoMIPS
kernel: Security Scaffold v1.0.0 initialized
kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
kernel: CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
kernel: CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000
kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
kernel: CPU: L2 cache: 512K
kernel: CPU serial number disabled.
kernel: CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
kernel: Intel machine check architecture supported.
kernel: Intel machine check reporting enabled on CPU#0.
kernel: CPU: Intel Pentium III (Katmai) stepping 03
kernel: Enabling fast FPU save and restore... done.
kernel: Enabling unmasked SIMD FPU exception support... done.
kernel: Checking 'hlt' instruction... OK.
kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
kernel: enabled ExtINT on CPU#0
kernel: ESR value before enabling vector: 00000000
kernel: ESR value after enabling vector: 00000000
kernel: Using local APIC timer interrupts.
kernel: calibrating APIC timer ...
kernel: ..... CPU clock speed is 551.0160 MHz.
kernel: ..... host bus clock speed is 100.0210 MHz.
kernel: checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
kernel: Freeing initrd memory: 1668k freed
kernel: NET: Registered protocol family 16
kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
kernel: PCI: Using configuration type 1
kernel: mtrr: v2.0 (20020519)
kernel: ACPI: Subsystem revision 20040326
kernel: ACPI: Interpreter disabled.
kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
kernel: PnPBIOS: Scanning system for PnP BIOS support...
kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00f60b0
kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf9e10:0x0, dseg 0xf0000
kernel: PnPBIOS: dev_node_info: function not supported on this system
kernel: PnPBIOS: Unable to get node info. Aborting.
kernel: PCI: Probing PCI hardware
kernel: PCI: Probing PCI hardware (bus 00)
kernel: VFS: Disk quotas dquot_6.5.1
kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
kernel: devfs: boot_options: 0x0
kernel: Initializing Cryptographic API
kernel: Limiting direct PCI/PCI transfers.
kernel: isapnp: Scanning for PnP cards...
kernel: isapnp: Card 'Crystal Codec'
kernel: isapnp: 1 Plug & Play card detected total
kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
kernel: NET: Registered protocol family 2
kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
kernel: TCP: Hash tables configured (established 16384 bind 32768)
kernel: NET: Registered protocol family 8
kernel: NET: Registered protocol family 20
kernel: RAMDISK: cramfs filesystem found at block 0
kernel: RAMDISK: Loading 1668 blocks [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^Hdone.
kernel: VFS: Mounted root (cramfs filesystem) readonly.
kernel: Freeing unused kernel memory: 148k freed
kernel: vesafb: probe of vesafb0 failed with error -6
kernel: NET: Registered protocol family 1
kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kernel: PIIX4: IDE controller at PCI slot 0000:00:07.1
kernel: PIIX4: chipset revision 1
kernel: PIIX4: not 100%% native mode: will probe irqs later
kernel: ide0: BM-DMA at 0x8430-0x8437, BIOS settings: hda:DMA, hdb:pio
kernel: ide1: BM-DMA at 0x8438-0x843f, BIOS settings: hdc:pio, hdd:pio
kernel: hda: Maxtor 91021U2, ATA DISK drive
kernel: Using anticipatory io scheduler
kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
kernel: hda: max request size: 128KiB
kernel: hda: 20010816 sectors (10245 MB) w/512KiB Cache, CHS=19852/16/63, UDMA(33)
kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
kernel: hdc: CD-ROM 48X/AKU, ATAPI CD/DVD-ROM drive
kernel: ide1 at 0x170-0x177,0x376 on irq 15
kernel: ext3: No journal on filesystem on hda2
kernel: hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
kernel: Uniform CD-ROM driver Revision: 3.20
kernel: Real Time Clock Driver v1.12
kernel: input: PC Speaker
kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
kernel: eth0: 0000:00:11.0, 00:00:E2:1E:9B:08, IRQ 10.
kernel: Receiver lock-up bug exists -- enabling work-around.
kernel: Board assembly 097172-016, Physical connectors present: RJ45
kernel: Primary interface chip i82555 PHY #1.
kernel: General self-test: passed.
kernel: Serial sub-system self-test: passed.
kernel: Internal registers self-test: passed.
kernel: ROM checksum self-test: passed (0x24c9f043).
kernel: Receiver lock-up workaround activated.
kernel: ip_conntrack version 2.1 (2047 buckets, 16376 max) - 296 bytes per conntrack
kernel: mice: PS/2 mouse device common for all mice
kernel: input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
kernel: pnp: Device 00:01.00 activated.
kernel: pnp: Device 00:01.02 activated.
kernel: pnp: Device 00:01.03 activated.
kernel: Capability LSM initialized
kernel: Adding 262136k swap on /swapfile. Priority:-1 extents:67
kernel: ip_tables: (C) 2000-2002 Netfilter core team
kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
kernel: apm: driver version: BIOS did not set a return code
apmd[674]: apmd 3.2.1 interfacing with apm driver 1.16ac and APM BIOS 1.2
Reply to: