Bug#269604: english translation
Andres Salomon wrote:
Hi,
Babelfish doesn't do swedish->english; can you please translate what the
administrator said into english?
Approximately what I said previously. A more exact translation follows:
First I'm saying
>Det kan vara en möjlighet. Finns det något ställe att hitta mera info om
detta
>> problem?
>>
translates to:
That can be a possibility. Is their any place where I can find more info about
this problem?
Then he says:
Ja, säkert massor. Enligt vad jag läste är det för att olika
brandväggar strippar TCP-options initialt. Vår brandvägg gör inte
det, men Linuxen fattar inte det. Det går att ställa in nånstans
i /proc hur den skall göra.
A close translation should be:
Yes probably a lot. According to what I read its because different firewalls
strips TCP-options initially. Our firewall doesn't do that, but Linuxen doesn't
get it. Its possible to configure it to do the right thing somewhere under /proc.
My interpretation of what he means is as in the last mail, i.e.
one possible reason for this problem is that Linux can't handle that their
firewall won't strip TCP packages initially.
I guess you could test mailing him at ragge@ludd.luth.se also. I sent another
mail asking for clarification, but as I interpreted it he doesn't remember
anything specific.
Also, connecting to http://www.ludd.luth.se/ works for me w/ 2.6.8-3.
For me too, but the downloading of the page hangs after ~20% of the page.
Another example is ssh connection. doing "$ssh maguno@best.ludd.luth.se" works
in 2.6.7-1 but not in 2.6.8-3.
I'm attaching ssh -vvvv output from doing the same ssh connection from both
2.6.7-1 and 2.6.8-3. It should also be reproducible since the error happens
before ssh asks for password.
/Magnus Ekdahl
OpenSSH_3.8.1p1 Debian 1:3.8.1p1-8, OpenSSL 0.9.7d 17 Mar 2004
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to best.ludd.luth.se [130.240.16.78] port 22.
debug1: Connection established.
debug1: identity file /home/magnus/.ssh/identity type -1
debug1: identity file /home/magnus/.ssh/id_rsa type -1
debug3: Not a RSA1 key file /home/magnus/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/magnus/.ssh/id_dsa type 2
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.8p1
debug1: match: OpenSSH_3.8p1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 Debian 1:3.8.1p1-8
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
Connection closed by 130.240.16.78
OpenSSH_3.8.1p1 Debian 1:3.8.1p1-8, OpenSSL 0.9.7d 17 Mar 2004
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to best.ludd.luth.se [130.240.16.77] port 22.
debug1: Connection established.
debug1: identity file /home/magnus/.ssh/identity type -1
debug1: identity file /home/magnus/.ssh/id_rsa type -1
debug3: Not a RSA1 key file /home/magnus/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/magnus/.ssh/id_dsa type 2
debug1: Remote protocol version 1.99, remote software version Sun_SSH_1.0
debug1: match: Sun_SSH_1.0 pat Sun_SSH_1.0*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 Debian 1:3.8.1p1-8
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,blowfish-cbc,3des-cbc,rijndael128-cbc
debug2: kex_parse_kexinit: aes128-cbc,blowfish-cbc,3des-cbc,rijndael128-cbc
debug2: kex_parse_kexinit: hmac-sha1,hmac-md5
debug2: kex_parse_kexinit: hmac-sha1,hmac-md5
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: C,geo,lcttab,iso_8859_15,iso_8859_1,en_CA,en_CA.ISO8859-1,en_US,en_US.ISO8859-1,en_US.ISO8859-15,en_US.ISO8859-15@euro,es,es_MX,es_MX.ISO8859-1,fr,fr_CA,fr_CA.ISO8859-1
debug2: kex_parse_kexinit: C,geo,lcttab,iso_8859_15,iso_8859_1,en_CA,en_CA.ISO8859-1,en_US,en_US.ISO8859-1,en_US.ISO8859-15,en_US.ISO8859-15@euro,es,es_MX,es_MX.ISO8859-1,fr,fr_CA,fr_CA.ISO8859-1
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug2: dh_gen_key: priv key bits set: 138/256
debug2: bits set: 514/1024
debug1: sending SSH2_MSG_KEXDH_INIT
debug1: expecting SSH2_MSG_KEXDH_REPLY
debug3: check_host_in_hostfile: filename /home/magnus/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 8
debug3: check_host_in_hostfile: filename /home/magnus/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 8
debug1: Host 'best.ludd.luth.se' is known and matches the DSA host key.
debug1: Found key in /home/magnus/.ssh/known_hosts:8
debug2: bits set: 545/1024
debug1: ssh_dss_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/magnus/.ssh/identity ((nil))
debug2: key: /home/magnus/.ssh/id_rsa ((nil))
debug2: key: /home/magnus/.ssh/id_dsa (0x808c9d0)
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/magnus/.ssh/identity
debug3: no such identity: /home/magnus/.ssh/identity
debug1: Trying private key: /home/magnus/.ssh/id_rsa
debug3: no such identity: /home/magnus/.ssh/id_rsa
debug1: Offering public key: /home/magnus/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
Reply to: