kernel-source-2.6.8: Unable to suspend using APM with APM and ACPI compiled in
Subject: kernel-source-2.6.8: Unable to suspend using APM with APM and ACPI compiled in
Package: kernel-source-2.6.8
Version: 2.6.8-5
Severity: normal
Dear Debian Kernel developers,
This is a bug report, but I am not filling a bug at the Debian BTS at
the moment, since it is very specific, and maybe it is not reproducible
at all with other hardware. If you think that it should be better to
fill the bug in the Debian BTS, I will do so.
Short description:
I use a custom compiled kernel from Debian sources on a laptop with APM
and ACPI compiled in.
I use "acpi=off" as a kernel parameter.
With kernel versions up to
kernel-source-2.6.8-2
I was able to suspend the machine (using APM) without problems. Since
kernel version
kernel-source-2.6.8-4
I can't do it anymore.
a.- Using key press (in my laptop Fn-POWER): the system ignores it, it
does not generate APM events
b.- Using "apm -s": the screen goes blank, no further activity is seen,
(no suspend, no wake), I have to power down the machine.
Expected behaviour:
a.- Pressing Fn+POWER should suspend to disk
b.- Using "apm -s" should suspend to memory, and wake on the following
POWER button key press
Investigating the problem, I found that I can successfully suspend the
machine by building kernels by either:
1.- Removing ACPI from the kernel config
2.- Removing the patch (patch -R) acpi-early.dpatch
by comparing the syslog of a "right" working kernel, and a "wrong"
working kernel, I find the following suspicious line:
$ diff -Nru syslog-right-clean syslog-wrong-clean
[...]
@@ -41,6 +41,7 @@
localhost kernel: Enabling fast FPU save and restore... done.
localhost kernel: Enabling unmasked SIMD FPU exception support... done.
localhost kernel: Checking 'hlt' instruction... OK.
+ localhost kernel: ACPI: IRQ9 SCI: Level Trigger.
localhost kernel: NET: Registered protocol family 16
localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9c4, last bus=1
localhost kernel: PCI: Using configuration type 1
[...]
In case you find this worth investigating (and/or fixing), in the
attachment I am sending to you:
1.- My .config file
2.- Some syslogs (with the date and time removed, to allow for easily
running "diff" on them):
a.- syslog-right-clean : a working kernel compiled with
kernel-source-2.6.8-2
b.- syslog-right-clean : a non-working kernel compiled with
kernel-source-2.6.8-5, same .config as a)
c.- syslog-noacpi-clean : a working kernel, compiled with
kernel-source-2.6.8-5, with ACPI removed from the .config file
d.- syslog-unpatch-clean : a working kernel, based on
kernel-source-2.6.8-5, with the acpi-early.dpatch patch
reversed, same config as in a)
3.- buildinfo for kernel a) (the others are similar)
This is not very important, since I have a couple of workarounds, but I
thought that I would report this small regression anyway.
Best regards, and thank you for your work,
Jaume
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing'), (105, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.8alcaprova
Locale: LANG=C, LC_CTYPE=C
Versions of packages kernel-source-2.6.8 depends on:
ii binutils 2.14.90.0.7-8 The GNU assembler, linker and bina
ii bzip2 1.0.2-1 A high-quality block-sorting file
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
-- no debconf information
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
# CONFIG_X86_EMU486 is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_YENTA=m
CONFIG_CARDBUS=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=m
# CONFIG_I2O_CONFIG is not set
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# ATM drivers
#
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_MOUSEDEV_PSAUX_ENABLE=y
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS4281=m
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
localhost syslogd 1.4.1#15: restart.
localhost kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
localhost kernel: Inspecting /boot/System.map-2.6.8alcatel
localhost kernel: Loaded 27218 symbols from /boot/System.map-2.6.8alcatel.
localhost kernel: Symbols match kernel version 2.6.8.
localhost kernel: No module symbols loaded - kernel modules not enabled.
localhost kernel: Linux version 2.6.8alcatel (guasch@jasi) (gcc version 3.3.4 (Debian 1:3.3.4-6sarge1)) #1 Mon Aug 23 21:20:43 CEST 2004
localhost kernel: BIOS-provided physical RAM map:
localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
localhost kernel: BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved)
localhost kernel: BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
localhost kernel: BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
localhost kernel: BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
localhost kernel: 191MB LOWMEM available.
localhost kernel: On node 0 totalpages: 49136
localhost kernel: DMA zone: 4096 pages, LIFO batch:1
localhost kernel: Normal zone: 45040 pages, LIFO batch:10
localhost kernel: HighMem zone: 0 pages, LIFO batch:1
localhost kernel: DMI 2.3 present.
localhost kernel: Built 1 zonelists
localhost kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=305 acpi=off
localhost kernel: Initializing CPU#0
localhost kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
localhost kernel: Detected 647.062 MHz processor.
localhost kernel: Using tsc for high-res timesource
localhost kernel: Console: colour VGA+ 80x25
localhost kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
localhost kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
localhost kernel: Memory: 191420k/196544k available (1691k kernel code, 4492k reserved, 748k data, 128k init, 0k highmem)
localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
localhost kernel: Calibrating delay loop... 1277.95 BogoMIPS
localhost kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
localhost kernel: CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
localhost kernel: CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
localhost kernel: CPU: L2 cache: 128K
localhost kernel: CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
localhost kernel: CPU: Intel Celeron (Coppermine) stepping 06
localhost kernel: Enabling fast FPU save and restore... done.
localhost kernel: Enabling unmasked SIMD FPU exception support... done.
localhost kernel: Checking 'hlt' instruction... OK.
localhost kernel: NET: Registered protocol family 16
localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9c4, last bus=1
localhost kernel: PCI: Using configuration type 1
localhost kernel: mtrr: v2.0 (20020519)
localhost kernel: ACPI: Subsystem revision 20040326
localhost kernel: ACPI: Interpreter disabled.
localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
localhost kernel: pnp: the driver 'system' has been registered
localhost kernel: PnPBIOS: Scanning system for PnP BIOS support...
localhost kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00f63d0
localhost kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaa9d, dseg 0x400
localhost kernel: pnp: match found with the PnP device '00:00' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:01' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:0a' and the driver 'system'
localhost kernel: pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
localhost kernel: pnp: 00:0a: ioport range 0x1000-0x103f has been reserved
localhost kernel: pnp: 00:0a: ioport range 0xff80-0xff8f has been reserved
localhost kernel: pnp: match found with the PnP device '00:0b' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:0c' and the driver 'system'
localhost kernel: PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
localhost kernel: PCI: Probing PCI hardware
localhost kernel: PCI: Probing PCI hardware (bus 00)
localhost kernel: PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
localhost kernel: PCI: IRQ 0 for device 0000:00:04.0 doesn't match PIRQ mask - try pci=usepirqmask
localhost kernel: PCI: Found IRQ 11 for device 0000:00:04.0
localhost kernel: PCI: Sharing IRQ 11 with 0000:00:04.1
localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
localhost kernel: Initializing Cryptographic API
localhost kernel: Limiting direct PCI/PCI transfers.
localhost kernel: isapnp: Scanning for PnP cards...
localhost kernel: isapnp: No Plug & Play device found
localhost kernel: Using anticipatory io scheduler
localhost kernel: Floppy drive(s): fd0 is 1.44M
localhost kernel: FDC 0 is a National Semiconductor PC87306
localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
localhost kernel: PIIX4: IDE controller at PCI slot 0000:00:07.1
localhost kernel: PIIX4: chipset revision 1
localhost kernel: PIIX4: not 100%% native mode: will probe irqs later
localhost kernel: ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
localhost kernel: ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
localhost kernel: hda: TOSHIBA MK1016GAP, ATA DISK drive
localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
localhost kernel: hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
localhost kernel: hda: max request size: 128KiB
localhost kernel: hda: 19640880 sectors (10056 MB), CHS=19485/16/63, UDMA(33)
localhost kernel: hda: hda1 hda2 < hda5 hda6 >
localhost kernel: hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
localhost kernel: Uniform CD-ROM driver Revision: 3.20
localhost kernel: mice: PS/2 mouse device common for all mice
localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
localhost kernel: input: PS/2 Generic Mouse on isa0060/serio1
localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
localhost kernel: NET: Registered protocol family 2
localhost kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
localhost kernel: TCP: Hash tables configured (established 16384 bind 32768)
localhost kernel: NET: Registered protocol family 1
localhost kernel: NET: Registered protocol family 17
localhost kernel: kjournald starting. Commit interval 5 seconds
localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
localhost kernel: VFS: Mounted root (ext3 filesystem) readonly.
localhost kernel: Freeing unused kernel memory: 128k freed
localhost kernel: Adding 184708k swap on /dev/hda6. Priority:-1 extents:1
localhost kernel: EXT3 FS on hda5, internal journal
localhost kernel: Real Time Clock Driver v1.12
localhost kernel: Linux agpgart interface v0.100 (c) Dave Jones
localhost kernel: agpgart: Detected an Intel 440BX Chipset.
localhost kernel: agpgart: Maximum main memory to use for agp memory: 149M
localhost kernel: agpgart: AGP aperture is 64M @ 0xe0000000
localhost kernel: usbcore: registered new driver usbfs
localhost kernel: usbcore: registered new driver hub
localhost kernel: USB Universal Host Controller Interface driver v2.2
localhost kernel: PCI: Found IRQ 9 for device 0000:00:07.2
localhost kernel: PCI: Sharing IRQ 9 with 0000:00:11.0
localhost kernel: uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
localhost kernel: uhci_hcd 0000:00:07.2: irq 9, io base 00001080
localhost kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
localhost kernel: hub 1-0:1.0: USB hub found
localhost kernel: hub 1-0:1.0: 2 ports detected
localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
localhost kernel: ttyS3 at I/O 0x2e8 (irq = 3) is a NS16550A
localhost kernel: PCI: Found IRQ 5 for device 0000:00:08.0
localhost anacron[893]: Anacron 2.3 started on 2004-08-30
localhost anacron[893]: Normal exit (0 jobs run)
localhost apmd[897]: apmd 3.2.1 interfacing with apm driver 1.16ac and APM BIOS 1.2
localhost kernel: pnp: the driver 'parport_pc' has been registered
localhost kernel: pnp: match found with the PnP device '00:14' and the driver 'parport_pc'
localhost kernel: parport: PnPBIOS parport detected.
localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
localhost kernel: lp0: using parport0 (interrupt-driven).
localhost ifplugd(eth0)[952]: ifplugd 0.25 initializing.
localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
localhost kernel: PCI: Found IRQ 9 for device 0000:00:11.0
localhost kernel: PCI: Sharing IRQ 9 with 0000:00:07.2
localhost kernel: eth0: OEM i82557/i82558 10/100 Ethernet, 00:90:96:0C:19:F7, IRQ 9.
localhost kernel: Board assembly 506470-151, Physical connectors present: RJ45
localhost kernel: Primary interface chip i82555 PHY #1.
localhost kernel: General self-test: passed.
localhost kernel: Serial sub-system self-test: passed.
localhost kernel: Internal registers self-test: passed.
localhost kernel: ROM checksum self-test: passed (0x04f4518b).
localhost ifplugd(eth0)[952]: Using interface eth0/00:90:96:0C:19:F7 with driver <eepro100> (version: eepro100.c:v1.09j-t 9/29/99 Don)
localhost ifplugd(eth0)[952]: Using detection mode: SIOCETHTOOL
localhost ifplugd(eth0)[952]: Initialization complete, link beat not detected.
localhost wwwoffled[1032]: WWWOFFLE Demon Version 2.8c (with zlib,with ipv6) started.
localhost wwwoffled[1034]: Detached from terminal and changed pid to 1034.
localhost /usr/sbin/cron[1048]: (CRON) INFO (pidfile fd = 3)
localhost /usr/sbin/cron[1049]: (CRON) STARTUP (fork ok)
localhost /usr/sbin/cron[1049]: (CRON) INFO (Running @reboot jobs)
localhost ifplugd(eth0)[952]: SIGUSR1: Daemon suspended (#1)
localhost apmd[897]: Suspending now
localhost kernel: PCI: Found IRQ 5 for device 0000:00:08.0
localhost ifplugd(eth0)[952]: SIGUSR2: Daemon resumed (#1)
localhost anacron[1371]: Anacron 2.3 started on 2004-08-30
localhost anacron[1371]: Normal exit (0 jobs run)
localhost syslogd 1.4.1#15: restart.
localhost kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
localhost kernel: Inspecting /boot/System.map-2.6.8alcaprova
localhost kernel: Loaded 27219 symbols from /boot/System.map-2.6.8alcaprova.
localhost kernel: Symbols match kernel version 2.6.8.
localhost kernel: No module symbols loaded - kernel modules not enabled.
localhost kernel: Linux version 2.6.8alcaprova (guasch@jasi) (gcc version 3.3.4 (Debian 1:3.3.4-6sarge1)) #1 Mon Aug 30 22:04:08 CEST 2004
localhost kernel: BIOS-provided physical RAM map:
localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
localhost kernel: BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved)
localhost kernel: BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
localhost kernel: BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
localhost kernel: BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
localhost kernel: 191MB LOWMEM available.
localhost kernel: On node 0 totalpages: 49136
localhost kernel: DMA zone: 4096 pages, LIFO batch:1
localhost kernel: Normal zone: 45040 pages, LIFO batch:10
localhost kernel: HighMem zone: 0 pages, LIFO batch:1
localhost kernel: DMI 2.3 present.
localhost kernel: Built 1 zonelists
localhost kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=305 acpi=off
localhost kernel: Initializing CPU#0
localhost kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
localhost kernel: Detected 646.910 MHz processor.
localhost kernel: Using tsc for high-res timesource
localhost kernel: Console: colour VGA+ 80x25
localhost kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
localhost kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
localhost kernel: Memory: 191420k/196544k available (1691k kernel code, 4492k reserved, 748k data, 128k init, 0k highmem)
localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
localhost kernel: Calibrating delay loop... 1277.95 BogoMIPS
localhost kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
localhost kernel: CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
localhost kernel: CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
localhost kernel: CPU: L2 cache: 128K
localhost kernel: CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
localhost kernel: CPU: Intel Celeron (Coppermine) stepping 06
localhost kernel: Enabling fast FPU save and restore... done.
localhost kernel: Enabling unmasked SIMD FPU exception support... done.
localhost kernel: Checking 'hlt' instruction... OK.
localhost kernel: ACPI: IRQ9 SCI: Level Trigger.
localhost kernel: NET: Registered protocol family 16
localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9c4, last bus=1
localhost kernel: PCI: Using configuration type 1
localhost kernel: mtrr: v2.0 (20020519)
localhost kernel: ACPI: Subsystem revision 20040326
localhost kernel: ACPI: Interpreter disabled.
localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
localhost kernel: pnp: the driver 'system' has been registered
localhost kernel: PnPBIOS: Scanning system for PnP BIOS support...
localhost kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00f63d0
localhost kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaa9d, dseg 0x400
localhost kernel: pnp: match found with the PnP device '00:00' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:01' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:0a' and the driver 'system'
localhost kernel: pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
localhost kernel: pnp: 00:0a: ioport range 0x1000-0x103f has been reserved
localhost kernel: pnp: 00:0a: ioport range 0xff80-0xff8f has been reserved
localhost kernel: pnp: match found with the PnP device '00:0b' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:0c' and the driver 'system'
localhost kernel: PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
localhost kernel: PCI: Probing PCI hardware
localhost kernel: PCI: Probing PCI hardware (bus 00)
localhost kernel: PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
localhost kernel: PCI: IRQ 0 for device 0000:00:04.0 doesn't match PIRQ mask - try pci=usepirqmask
localhost kernel: PCI: Found IRQ 11 for device 0000:00:04.0
localhost kernel: PCI: Sharing IRQ 11 with 0000:00:04.1
localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
localhost kernel: Initializing Cryptographic API
localhost kernel: Limiting direct PCI/PCI transfers.
localhost kernel: isapnp: Scanning for PnP cards...
localhost kernel: isapnp: No Plug & Play device found
localhost kernel: Using anticipatory io scheduler
localhost kernel: Floppy drive(s): fd0 is 1.44M
localhost kernel: FDC 0 is a National Semiconductor PC87306
localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
localhost kernel: PIIX4: IDE controller at PCI slot 0000:00:07.1
localhost kernel: PIIX4: chipset revision 1
localhost kernel: PIIX4: not 100%% native mode: will probe irqs later
localhost kernel: ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
localhost kernel: ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
localhost kernel: hda: TOSHIBA MK1016GAP, ATA DISK drive
localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
localhost kernel: hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
localhost kernel: hda: max request size: 128KiB
localhost kernel: hda: 19640880 sectors (10056 MB), CHS=19485/16/63, UDMA(33)
localhost kernel: hda: hda1 hda2 < hda5 hda6 >
localhost kernel: hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
localhost kernel: Uniform CD-ROM driver Revision: 3.20
localhost kernel: mice: PS/2 mouse device common for all mice
localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
localhost kernel: input: PS/2 Generic Mouse on isa0060/serio1
localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
localhost kernel: NET: Registered protocol family 2
localhost kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
localhost kernel: TCP: Hash tables configured (established 16384 bind 32768)
localhost kernel: NET: Registered protocol family 1
localhost kernel: NET: Registered protocol family 17
localhost kernel: kjournald starting. Commit interval 5 seconds
localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
localhost kernel: VFS: Mounted root (ext3 filesystem) readonly.
localhost kernel: Freeing unused kernel memory: 128k freed
localhost kernel: Adding 184708k swap on /dev/hda6. Priority:-1 extents:1
localhost kernel: EXT3 FS on hda5, internal journal
localhost kernel: Real Time Clock Driver v1.12
localhost kernel: Linux agpgart interface v0.100 (c) Dave Jones
localhost kernel: agpgart: Detected an Intel 440BX Chipset.
localhost kernel: agpgart: Maximum main memory to use for agp memory: 149M
localhost kernel: agpgart: AGP aperture is 64M @ 0xe0000000
localhost kernel: usbcore: registered new driver usbfs
localhost kernel: usbcore: registered new driver hub
localhost kernel: USB Universal Host Controller Interface driver v2.2
localhost kernel: PCI: Found IRQ 9 for device 0000:00:07.2
localhost kernel: PCI: Sharing IRQ 9 with 0000:00:11.0
localhost kernel: uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
localhost kernel: uhci_hcd 0000:00:07.2: irq 9, io base 00001080
localhost kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
localhost kernel: hub 1-0:1.0: USB hub found
localhost kernel: hub 1-0:1.0: 2 ports detected
localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
localhost kernel: ttyS3 at I/O 0x2e8 (irq = 3) is a NS16550A
localhost kernel: PCI: Found IRQ 5 for device 0000:00:08.0
localhost anacron[895]: Anacron 2.3 started on 2004-08-30
localhost anacron[895]: Normal exit (0 jobs run)
localhost apmd[899]: apmd 3.2.1 interfacing with apm driver 1.16ac and APM BIOS 1.2
localhost kernel: pnp: the driver 'parport_pc' has been registered
localhost kernel: pnp: match found with the PnP device '00:14' and the driver 'parport_pc'
localhost kernel: parport: PnPBIOS parport detected.
localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
localhost kernel: lp0: using parport0 (interrupt-driven).
localhost ifplugd(eth0)[954]: ifplugd 0.25 initializing.
localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
localhost kernel: PCI: Found IRQ 9 for device 0000:00:11.0
localhost kernel: PCI: Sharing IRQ 9 with 0000:00:07.2
localhost kernel: eth0: OEM i82557/i82558 10/100 Ethernet, 00:90:96:0C:19:F7, IRQ 9.
localhost kernel: Board assembly 506470-151, Physical connectors present: RJ45
localhost kernel: Primary interface chip i82555 PHY #1.
localhost kernel: General self-test: passed.
localhost kernel: Serial sub-system self-test: passed.
localhost kernel: Internal registers self-test: passed.
localhost kernel: ROM checksum self-test: passed (0x04f4518b).
localhost ifplugd(eth0)[954]: Using interface eth0/00:90:96:0C:19:F7 with driver <eepro100> (version: eepro100.c:v1.09j-t 9/29/99 Don)
localhost ifplugd(eth0)[954]: Using detection mode: SIOCETHTOOL
localhost ifplugd(eth0)[954]: Initialization complete, link beat not detected.
localhost wwwoffled[1034]: WWWOFFLE Demon Version 2.8c (with zlib,with ipv6) started.
localhost wwwoffled[1036]: Detached from terminal and changed pid to 1036.
localhost /usr/sbin/cron[1050]: (CRON) INFO (pidfile fd = 3)
localhost /usr/sbin/cron[1051]: (CRON) STARTUP (fork ok)
localhost /usr/sbin/cron[1051]: (CRON) INFO (Running @reboot jobs)
localhost shutdown[1404]: shutting down for system reboot
localhost init: Switching to runlevel: 6
localhost ifplugd(eth0)[954]: Exiting.
localhost wwwoffled[1036]: WWWOFFLE Connection from host localhost (127.0.0.1).
localhost wwwoffled[1036]: WWWOFFLE Kill.
localhost wwwoffled[1036]: Exit signalled.
localhost wwwoffled[1036]: Exiting.
localhost kernel: Kernel logging (proc) stopped.
localhost kernel: Kernel log daemon terminating.
localhost exiting on signal 15
localhost syslogd 1.4.1#15: restart.
localhost kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
localhost kernel: Inspecting /boot/System.map-2.6.8noacpi
localhost kernel: Loaded 25942 symbols from /boot/System.map-2.6.8noacpi.
localhost kernel: Symbols match kernel version 2.6.8.
localhost kernel: No module symbols loaded - kernel modules not enabled.
localhost kernel: Linux version 2.6.8noacpi (guasch@jasi) (gcc version 3.3.4 (Debian 1:3.3.4-6sarge1)) #1 Mon Aug 30 23:05:41 CEST 2004
localhost kernel: BIOS-provided physical RAM map:
localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
localhost kernel: BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved)
localhost kernel: BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
localhost kernel: BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
localhost kernel: BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
localhost kernel: 191MB LOWMEM available.
localhost kernel: On node 0 totalpages: 49136
localhost kernel: DMA zone: 4096 pages, LIFO batch:1
localhost kernel: Normal zone: 45040 pages, LIFO batch:10
localhost kernel: HighMem zone: 0 pages, LIFO batch:1
localhost kernel: DMI 2.3 present.
localhost kernel: Built 1 zonelists
localhost kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=305 acpi=off
localhost kernel: Initializing CPU#0
localhost kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
localhost kernel: Detected 646.797 MHz processor.
localhost kernel: Using tsc for high-res timesource
localhost kernel: Console: colour VGA+ 80x25
localhost kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
localhost kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
localhost kernel: Memory: 191592k/196544k available (1577k kernel code, 4320k reserved, 702k data, 124k init, 0k highmem)
localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
localhost kernel: Calibrating delay loop... 1277.95 BogoMIPS
localhost kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
localhost kernel: CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
localhost kernel: CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
localhost kernel: CPU: L2 cache: 128K
localhost kernel: CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
localhost kernel: CPU: Intel Celeron (Coppermine) stepping 06
localhost kernel: Enabling fast FPU save and restore... done.
localhost kernel: Enabling unmasked SIMD FPU exception support... done.
localhost kernel: Checking 'hlt' instruction... OK.
localhost kernel: NET: Registered protocol family 16
localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9c4, last bus=1
localhost kernel: PCI: Using configuration type 1
localhost kernel: mtrr: v2.0 (20020519)
localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
localhost kernel: pnp: the driver 'system' has been registered
localhost kernel: PnPBIOS: Scanning system for PnP BIOS support...
localhost kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00f63d0
localhost kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaa9d, dseg 0x400
localhost kernel: pnp: match found with the PnP device '00:00' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:01' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:0a' and the driver 'system'
localhost kernel: pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
localhost kernel: pnp: 00:0a: ioport range 0x1000-0x103f has been reserved
localhost kernel: pnp: 00:0a: ioport range 0xff80-0xff8f has been reserved
localhost kernel: pnp: match found with the PnP device '00:0b' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:0c' and the driver 'system'
localhost kernel: PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
localhost kernel: PCI: Probing PCI hardware
localhost kernel: PCI: Probing PCI hardware (bus 00)
localhost kernel: PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
localhost kernel: PCI: IRQ 0 for device 0000:00:04.0 doesn't match PIRQ mask - try pci=usepirqmask
localhost kernel: PCI: Found IRQ 11 for device 0000:00:04.0
localhost kernel: PCI: Sharing IRQ 11 with 0000:00:04.1
localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
localhost kernel: Initializing Cryptographic API
localhost kernel: Limiting direct PCI/PCI transfers.
localhost kernel: isapnp: Scanning for PnP cards...
localhost kernel: isapnp: No Plug & Play device found
localhost kernel: Using anticipatory io scheduler
localhost kernel: Floppy drive(s): fd0 is 1.44M
localhost kernel: FDC 0 is a National Semiconductor PC87306
localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
localhost kernel: PIIX4: IDE controller at PCI slot 0000:00:07.1
localhost kernel: PIIX4: chipset revision 1
localhost kernel: PIIX4: not 100%% native mode: will probe irqs later
localhost kernel: ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
localhost kernel: ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
localhost kernel: hda: TOSHIBA MK1016GAP, ATA DISK drive
localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
localhost kernel: hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
localhost kernel: hda: max request size: 128KiB
localhost kernel: hda: 19640880 sectors (10056 MB), CHS=19485/16/63, UDMA(33)
localhost kernel: hda: hda1 hda2 < hda5 hda6 >
localhost kernel: hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
localhost kernel: Uniform CD-ROM driver Revision: 3.20
localhost kernel: mice: PS/2 mouse device common for all mice
localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
localhost kernel: input: PS/2 Generic Mouse on isa0060/serio1
localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
localhost kernel: NET: Registered protocol family 2
localhost kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
localhost kernel: TCP: Hash tables configured (established 16384 bind 32768)
localhost kernel: NET: Registered protocol family 1
localhost kernel: NET: Registered protocol family 17
localhost kernel: kjournald starting. Commit interval 5 seconds
localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
localhost kernel: VFS: Mounted root (ext3 filesystem) readonly.
localhost kernel: Freeing unused kernel memory: 124k freed
localhost kernel: Adding 184708k swap on /dev/hda6. Priority:-1 extents:1
localhost kernel: EXT3 FS on hda5, internal journal
localhost kernel: Real Time Clock Driver v1.12
localhost kernel: Linux agpgart interface v0.100 (c) Dave Jones
localhost kernel: agpgart: Detected an Intel 440BX Chipset.
localhost kernel: agpgart: Maximum main memory to use for agp memory: 149M
localhost kernel: agpgart: AGP aperture is 64M @ 0xe0000000
localhost kernel: usbcore: registered new driver usbfs
localhost kernel: usbcore: registered new driver hub
localhost kernel: USB Universal Host Controller Interface driver v2.2
localhost kernel: PCI: Found IRQ 9 for device 0000:00:07.2
localhost kernel: PCI: Sharing IRQ 9 with 0000:00:11.0
localhost kernel: uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
localhost kernel: uhci_hcd 0000:00:07.2: irq 9, io base 00001080
localhost kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
localhost kernel: hub 1-0:1.0: USB hub found
localhost kernel: hub 1-0:1.0: 2 ports detected
localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
localhost kernel: ttyS3 at I/O 0x2e8 (irq = 3) is a NS16550A
localhost kernel: PCI: Found IRQ 5 for device 0000:00:08.0
localhost anacron[894]: Anacron 2.3 started on 2004-08-30
localhost anacron[894]: Normal exit (0 jobs run)
localhost apmd[898]: apmd 3.2.1 interfacing with apm driver 1.16ac and APM BIOS 1.2
localhost kernel: pnp: the driver 'parport_pc' has been registered
localhost kernel: pnp: match found with the PnP device '00:14' and the driver 'parport_pc'
localhost kernel: parport: PnPBIOS parport detected.
localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
localhost kernel: lp0: using parport0 (interrupt-driven).
localhost ifplugd(eth0)[950]: ifplugd 0.25 initializing.
localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
localhost kernel: PCI: Found IRQ 9 for device 0000:00:11.0
localhost kernel: PCI: Sharing IRQ 9 with 0000:00:07.2
localhost kernel: eth0: OEM i82557/i82558 10/100 Ethernet, 00:90:96:0C:19:F7, IRQ 9.
localhost kernel: Board assembly 506470-151, Physical connectors present: RJ45
localhost kernel: Primary interface chip i82555 PHY #1.
localhost kernel: General self-test: passed.
localhost kernel: Serial sub-system self-test: passed.
localhost kernel: Internal registers self-test: passed.
localhost kernel: ROM checksum self-test: passed (0x04f4518b).
localhost ifplugd(eth0)[950]: Using interface eth0/00:90:96:0C:19:F7 with driver <eepro100> (version: eepro100.c:v1.09j-t 9/29/99 Don)
localhost ifplugd(eth0)[950]: Using detection mode: SIOCETHTOOL
localhost ifplugd(eth0)[950]: Initialization complete, link beat not detected.
localhost wwwoffled[1030]: WWWOFFLE Demon Version 2.8c (with zlib,with ipv6) started.
localhost wwwoffled[1032]: Detached from terminal and changed pid to 1032.
localhost /usr/sbin/cron[1046]: (CRON) INFO (pidfile fd = 3)
localhost /usr/sbin/cron[1047]: (CRON) STARTUP (fork ok)
localhost /usr/sbin/cron[1047]: (CRON) INFO (Running @reboot jobs)
localhost ifplugd(eth0)[950]: SIGUSR1: Daemon suspended (#1)
localhost apmd[898]: Suspending now
localhost kernel: PCI: Found IRQ 5 for device 0000:00:08.0
localhost ifplugd(eth0)[950]: SIGUSR2: Daemon resumed (#1)
localhost anacron[1328]: Anacron 2.3 started on 2004-08-30
localhost anacron[1328]: Normal exit (0 jobs run)
localhost ifplugd(eth0)[950]: SIGUSR1: Daemon suspended (#1)
localhost apmd[898]: Suspending now
localhost kernel: PCI: Found IRQ 5 for device 0000:00:08.0
localhost ifplugd(eth0)[950]: SIGUSR2: Daemon resumed (#1)
localhost anacron[1517]: Anacron 2.3 started on 2004-08-30
localhost anacron[1517]: Normal exit (0 jobs run)
localhost syslogd 1.4.1#15: restart.
localhost kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
localhost kernel: Inspecting /boot/System.map-2.6.8nopatch
localhost kernel: Loaded 27218 symbols from /boot/System.map-2.6.8nopatch.
localhost kernel: Symbols match kernel version 2.6.8.
localhost kernel: No module symbols loaded - kernel modules not enabled.
localhost kernel: Linux version 2.6.8nopatch (guasch@jasi) (gcc version 3.3.4 (Debian 1:3.3.4-6sarge1)) #1 Tue Aug 31 12:44:17 CEST 2004
localhost kernel: BIOS-provided physical RAM map:
localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
localhost kernel: BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved)
localhost kernel: BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
localhost kernel: BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
localhost kernel: BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
localhost kernel: 191MB LOWMEM available.
localhost kernel: On node 0 totalpages: 49136
localhost kernel: DMA zone: 4096 pages, LIFO batch:1
localhost kernel: Normal zone: 45040 pages, LIFO batch:10
localhost kernel: HighMem zone: 0 pages, LIFO batch:1
localhost kernel: DMI 2.3 present.
localhost kernel: Built 1 zonelists
localhost kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=305 acpi=off
localhost kernel: Initializing CPU#0
localhost kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
localhost kernel: Detected 646.969 MHz processor.
localhost kernel: Using tsc for high-res timesource
localhost kernel: Console: colour VGA+ 80x25
localhost kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
localhost kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
localhost kernel: Memory: 191420k/196544k available (1691k kernel code, 4492k reserved, 748k data, 128k init, 0k highmem)
localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
localhost kernel: Calibrating delay loop... 1277.95 BogoMIPS
localhost kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
localhost kernel: CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
localhost kernel: CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
localhost kernel: CPU: L2 cache: 128K
localhost kernel: CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
localhost kernel: CPU: Intel Celeron (Coppermine) stepping 06
localhost kernel: Enabling fast FPU save and restore... done.
localhost kernel: Enabling unmasked SIMD FPU exception support... done.
localhost kernel: Checking 'hlt' instruction... OK.
localhost kernel: NET: Registered protocol family 16
localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9c4, last bus=1
localhost kernel: PCI: Using configuration type 1
localhost kernel: mtrr: v2.0 (20020519)
localhost kernel: ACPI: Subsystem revision 20040326
localhost kernel: ACPI: Interpreter disabled.
localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
localhost kernel: pnp: the driver 'system' has been registered
localhost kernel: PnPBIOS: Scanning system for PnP BIOS support...
localhost kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00f63d0
localhost kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaa9d, dseg 0x400
localhost kernel: pnp: match found with the PnP device '00:00' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:01' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:0a' and the driver 'system'
localhost kernel: pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
localhost kernel: pnp: 00:0a: ioport range 0x1000-0x103f has been reserved
localhost kernel: pnp: 00:0a: ioport range 0xff80-0xff8f has been reserved
localhost kernel: pnp: match found with the PnP device '00:0b' and the driver 'system'
localhost kernel: pnp: match found with the PnP device '00:0c' and the driver 'system'
localhost kernel: PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
localhost kernel: PCI: Probing PCI hardware
localhost kernel: PCI: Probing PCI hardware (bus 00)
localhost kernel: PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
localhost kernel: PCI: IRQ 0 for device 0000:00:04.0 doesn't match PIRQ mask - try pci=usepirqmask
localhost kernel: PCI: Found IRQ 11 for device 0000:00:04.0
localhost kernel: PCI: Sharing IRQ 11 with 0000:00:04.1
localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
localhost kernel: Initializing Cryptographic API
localhost kernel: Limiting direct PCI/PCI transfers.
localhost kernel: isapnp: Scanning for PnP cards...
localhost kernel: isapnp: No Plug & Play device found
localhost kernel: Using anticipatory io scheduler
localhost kernel: Floppy drive(s): fd0 is 1.44M
localhost kernel: FDC 0 is a National Semiconductor PC87306
localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
localhost kernel: PIIX4: IDE controller at PCI slot 0000:00:07.1
localhost kernel: PIIX4: chipset revision 1
localhost kernel: PIIX4: not 100%% native mode: will probe irqs later
localhost kernel: ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
localhost kernel: ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
localhost kernel: hda: TOSHIBA MK1016GAP, ATA DISK drive
localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
localhost kernel: hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
localhost kernel: hda: max request size: 128KiB
localhost kernel: hda: 19640880 sectors (10056 MB), CHS=19485/16/63, UDMA(33)
localhost kernel: hda: hda1 hda2 < hda5 hda6 >
localhost kernel: hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
localhost kernel: Uniform CD-ROM driver Revision: 3.20
localhost kernel: mice: PS/2 mouse device common for all mice
localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
localhost kernel: input: PS/2 Generic Mouse on isa0060/serio1
localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
localhost kernel: NET: Registered protocol family 2
localhost kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
localhost kernel: TCP: Hash tables configured (established 16384 bind 32768)
localhost kernel: NET: Registered protocol family 1
localhost kernel: NET: Registered protocol family 17
localhost kernel: kjournald starting. Commit interval 5 seconds
localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
localhost kernel: VFS: Mounted root (ext3 filesystem) readonly.
localhost kernel: Freeing unused kernel memory: 128k freed
localhost kernel: Adding 184708k swap on /dev/hda6. Priority:-1 extents:1
localhost kernel: EXT3 FS on hda5, internal journal
localhost kernel: Real Time Clock Driver v1.12
localhost kernel: Linux agpgart interface v0.100 (c) Dave Jones
localhost kernel: agpgart: Detected an Intel 440BX Chipset.
localhost kernel: agpgart: Maximum main memory to use for agp memory: 149M
localhost kernel: agpgart: AGP aperture is 64M @ 0xe0000000
localhost kernel: usbcore: registered new driver usbfs
localhost kernel: usbcore: registered new driver hub
localhost kernel: USB Universal Host Controller Interface driver v2.2
localhost kernel: PCI: Found IRQ 9 for device 0000:00:07.2
localhost kernel: PCI: Sharing IRQ 9 with 0000:00:11.0
localhost kernel: uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
localhost kernel: uhci_hcd 0000:00:07.2: irq 9, io base 00001080
localhost kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
localhost kernel: hub 1-0:1.0: USB hub found
localhost kernel: hub 1-0:1.0: 2 ports detected
localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
localhost kernel: ttyS3 at I/O 0x2e8 (irq = 3) is a NS16550A
localhost kernel: PCI: Found IRQ 5 for device 0000:00:08.0
localhost anacron[901]: Anacron 2.3 started on 2004-08-31
localhost anacron[901]: Normal exit (0 jobs run)
localhost apmd[905]: apmd 3.2.1 interfacing with apm driver 1.16ac and APM BIOS 1.2
localhost kernel: pnp: the driver 'parport_pc' has been registered
localhost kernel: pnp: match found with the PnP device '00:14' and the driver 'parport_pc'
localhost kernel: parport: PnPBIOS parport detected.
localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
localhost kernel: lp0: using parport0 (interrupt-driven).
localhost ifplugd(eth0)[954]: ifplugd 0.25 initializing.
localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
localhost kernel: PCI: Found IRQ 9 for device 0000:00:11.0
localhost kernel: PCI: Sharing IRQ 9 with 0000:00:07.2
localhost kernel: eth0: OEM i82557/i82558 10/100 Ethernet, 00:90:96:0C:19:F7, IRQ 9.
localhost kernel: Board assembly 506470-151, Physical connectors present: RJ45
localhost kernel: Primary interface chip i82555 PHY #1.
localhost kernel: General self-test: passed.
localhost kernel: Serial sub-system self-test: passed.
localhost kernel: Internal registers self-test: passed.
localhost kernel: ROM checksum self-test: passed (0x04f4518b).
localhost ifplugd(eth0)[954]: Using interface eth0/00:90:96:0C:19:F7 with driver <eepro100> (version: eepro100.c:v1.09j-t 9/29/99 Don)
localhost ifplugd(eth0)[954]: Using detection mode: SIOCETHTOOL
localhost ifplugd(eth0)[954]: Initialization complete, link beat not detected.
localhost wwwoffled[1034]: WWWOFFLE Demon Version 2.8c (with zlib,with ipv6) started.
localhost wwwoffled[1036]: Detached from terminal and changed pid to 1036.
localhost /usr/sbin/cron[1050]: (CRON) INFO (pidfile fd = 3)
localhost /usr/sbin/cron[1051]: (CRON) STARTUP (fork ok)
localhost /usr/sbin/cron[1051]: (CRON) INFO (Running @reboot jobs)
localhost ifplugd(eth0)[954]: SIGUSR1: Daemon suspended (#1)
localhost apmd[905]: Suspending now
localhost kernel: PCI: Found IRQ 5 for device 0000:00:08.0
localhost ifplugd(eth0)[954]: SIGUSR2: Daemon resumed (#1)
localhost anacron[1373]: Anacron 2.3 started on 2004-08-31
localhost anacron[1373]: Normal exit (0 jobs run)
gcc-2.95-2.95.4-22
gcc-3.3-3.3.4-6sarge1
gcc-3.3-base-3.3.4-6sarge1
gcc-3.3-doc-3.3.4-6sarge1
perl-5.8.4-2
dpkg-1.10.23
libc6-2.3.2.ds1-13
libc6-dev-2.3.2.ds1-13
libc6-i686-2.3.2.ds1-13
binutils-2.14.90.0.7-8
ldso-1.9.11-15
make-3.80-9
this was built on a machine with the kernel:
Linux jasi 2.6.7alcatel #1 Fri Jul 9 11:46:10 CEST 2004 i686 GNU/Linux
using the compiler:
gcc version 3.3.4 (Debian 1:3.3.4-6sarge1)
Reply to: