[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#261893: kernel-image-2.6.6-1-generic: Kernel bug at mm/slab.c:1530

http://people.debian.org/~nobse/kernel/kernel-image-2.6.8-alpha/

They are currently sitting in incoming, and will be moved into the
regular archive in a few hours.
I tried again with 2.6.8-3 from this URL. The problem persists, and I can't say the backtrace improved either... 

dmesg | ksymoops:
ksymoops 2.4.9 on alpha 2.6.8-1-generic.  Options used
    -V (default)
    -k /proc/ksyms (default)
    -l /proc/modules (default)
    -o /lib/modules/2.6.8-1-generic/ (default)
    -m /boot/System.map-2.6.8-1-generic (default)

Warning: You did not tell me where to find symbol information.  I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc.  ksymoops -h explains the options.

Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
4096K Bcache detected; load hit latency 28 cycles, load miss latency 106 cycles 
Kernel bug at mm/slab.c:1544
modprobe(200): Kernel Bug 1
pc = [<fffffc0000355a9c>] ra = [<fffffffc0023d040>] ps = 0000 Not tainted 
Using defaults from ksymoops -t elf64-alpha -a alpha
v0 = 0000000000000000  t0 = 0000000000000000  t1 = fffffc002fffc240
t2 = fffffc0000577138  t3 = fffffc002f1a5330  t4 = fffffc0000605b78
t5 = 0000000000000400  t6 = fffffc0000efe000  t7 = fffffc0000e54000
a0 = 0000000000000000  a1 = fffffffc00247b79  a2 = ffffffffbaadf00d
a3 = 00000000000000d0  a4 = fffffc0000e57e28  a5 = fffffc002f1a5228
t8 = 0000000000000000  t9 = fffffc0000355584  t10= 0000000000000030
t11= 0000000000000040  pv = fffffc0000355a5c  at = 0000000000000000
gp = fffffc00005f5b00  sp = fffffc0000e57e88
Trace:
[<fffffc0000349040>] sys_init_module+0x1f0/0x3a4
[<fffffc0000314db4>] entSys+0xa4/0xc0
Code: a0480068 243f1000 2021ff00 44410002 e4400004 00000081 <00000608> 004d3eb9 



PC;  fffffc0000355a9c <kmem_cache_destroy+40/1f0>   <=====


Trace; fffffc0000349040 <sys_init_module+1f0/3a4>
Trace; fffffc0000314db4 <entSys+a4/c0>

Code;  fffffc0000355a84 <kmem_cache_destroy+28/1f0>
0000000000000000 <_PC>:
Code;  fffffc0000355a84 <kmem_cache_destroy+28/1f0>
  0:   68 00 48 a0       ldl  t1,104(t7)
Code;  fffffc0000355a88 <kmem_cache_destroy+2c/1f0>
  4:   00 10 3f 24       ldah t0,4096
Code;  fffffc0000355a8c <kmem_cache_destroy+30/1f0>
  8:   00 ff 21 20       lda  t0,-256(t0)
Code;  fffffc0000355a90 <kmem_cache_destroy+34/1f0>
  c:   02 00 41 44       and  t1,t0,t1
Code;  fffffc0000355a94 <kmem_cache_destroy+38/1f0>
 10:   04 00 40 e4       beq  t1,24 <_PC+0x24>
Code;  fffffc0000355a98 <kmem_cache_destroy+3c/1f0>
 14:   81 00 00 00       bugchk
Code;  fffffc0000355a9c <kmem_cache_destroy+40/1f0>   <=====
 18:   08 06 00 00       call_pal     0x608   <=====
Code;  fffffc0000355aa0 <kmem_cache_destroy+44/1f0>
 1c:   b9 3e 4d 00       call_pal     0x4d3eb9
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled 

1 warning and 1 error issued.  Results may not be reliable.


Full dmesg output:
Linux version 2.6.8-1-generic (tretkowski@raindrop) (gcc version 3.3.4 (Debian 1:3.3.4-9)) #1 Mon Aug 30 04:25:40 CEST 2004 
Booting GENERIC on Miata using machine vector Miata from SRM
Major Options: LEGACY_START
Command line: ro  root=/dev/sda1 1
memcluster 0, usage 1, start        0, end      236
memcluster 1, usage 0, start      236, end    98303
memcluster 2, usage 1, start    98303, end    98304
freeing pages 236:384
freeing pages 794:98303
reserving pages 794:796
Initial ramdisk at: 0xfffffc002f952000 (5955584 bytes)
4096K Bcache detected; load hit latency 28 cycles, load miss latency 106 cycles 
pci: cia revision 1 (pyxis)
On node 0 totalpages: 98303
 DMA zone: 98303 pages, LIFO batch:8
 Normal zone: 0 pages, LIFO batch:1
 HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: ro  root=/dev/sda1 1
PID hash table entries: 4096 (order 12: 65536 bytes)
HWRPB cycle frequency bogus.  Estimated 433157639 Hz
Using epoch = 2000
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
Memory: 767872k/786424k available (1754k kernel code, 16328k reserved, 541k data, 264k init) 
Calibrating delay loop... 860.60 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd 
Freeing initrd memory: 5816k freed
NET: Registered protocol family 16
EISA bus registered
pci: passed tb register update test
pci: passed sg loopback i/o read test
pci: passed pte write cache snoop test
pci: failed valid tag invalid pte reload test (mcheck; workaround available)
pci: passed pci machine check test
pci: tbia workaround enabled
pci: enabling save/restore of SRM state
PCI: Bus 2, bridge: 0000:01:08.0
 IO window: disabled.
 MEM window: 09000000-090fffff
 PREFETCH window: disabled.
PCI: Bus 1, bridge: 0000:00:08.0
 IO window: 8000-8fff
 MEM window: 09000000-091fffff
 PREFETCH window: 09200000-092fffff
Linux Plug and Play Support v0.97 (c) Adam Belay
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 36 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 5816 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done. 
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 264k freed
NET: Registered protocol family 1
SCSI subsystem initialized
sym0: <895> rev 0x2 at pci 0000:01:09.0 irq 40
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
Using anticipatory io scheduler
 Vendor: IBM       Model: DPSS-318350N      Rev: S96H
 Type:   Direct-Access                      ANSI SCSI revision: 03
sym0:0:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:0:0): Beginning Domain Validation
sym0:0: wide asynchronous.
sym0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
scsi(0:0:0:0): Ending Domain Validation
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Kernel bug at mm/slab.c:1544
modprobe(200): Kernel Bug 1
pc = [<fffffc0000355a9c>] ra = [<fffffffc0023d040>] ps = 0000 Not tainted 
v0 = 0000000000000000  t0 = 0000000000000000  t1 = fffffc002fffc240
t2 = fffffc0000577138  t3 = fffffc002f1a5330  t4 = fffffc0000605b78
t5 = 0000000000000400  t6 = fffffc0000efe000  t7 = fffffc0000e54000
a0 = 0000000000000000  a1 = fffffffc00247b79  a2 = ffffffffbaadf00d
a3 = 00000000000000d0  a4 = fffffc0000e57e28  a5 = fffffc002f1a5228
t8 = 0000000000000000  t9 = fffffc0000355584  t10= 0000000000000030
t11= 0000000000000040  pv = fffffc0000355a5c  at = 0000000000000000
gp = fffffc00005f5b00  sp = fffffc0000e57e88
Trace:
[<fffffc0000349040>] sys_init_module+0x1f0/0x3a4
[<fffffc0000314db4>] entSys+0xa4/0xc0
Code: a0480068 243f1000 2021ff00 44410002 e4400004 00000081 <00000608> 004d3eb9 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled 
SGI XFS Quota Management subsystem
VFS: Can't find ext2 filesystem on dev sda1.
Unable to identify CD-ROM format.
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
Adding 1025008k swap on /dev/sda3.  Priority:-1 extents:1
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.12
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Capability LSM initialized
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[0] MMIO=[9000000-90007ff] Max Packet=[2048] 
Linux Tulip driver version 1.1.13 (May 11, 2002)
tulip0:  EEPROM default media type Autosense.
tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip0: Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block. tulip0: Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block. 
tulip0:  Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0: ***WARNING***: No MII transceiver found!
eth0: Digital DS21143 Tulip rev 17 at 0x9400, 00:00:F8:75:30:D1, IRQ 24.
tulip1:  EEPROM default media type Autosense.
tulip1:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip1:  MII transceiver #5 config 2100 status 7809 advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at 0x8400, 00:00:1C:B6:16:CF, IRQ 44.
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00601d0000002d95]
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ehci_hcd 0000:02:01.2: Found HC with no IRQ. Check BIOS/PCI 0000:02:01.2 setup! 
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
ohci_hcd 0000:02:01.0: Found HC with no IRQ. Check BIOS/PCI 0000:02:01.0 setup! ohci_hcd 0000:02:01.1: Found HC with no IRQ. Check BIOS/PCI 0000:02:01.1 setup! 
USB Universal Host Controller Interface driver v2.2
NET: Registered protocol family 17
eth1: Setting full-duplex based on MII#5 link partner capability of 45e1.
nfs warning: mount version older than kernel
NET: Registered protocol family 10
Disabled Privacy Extensions on device fffffc00005be6d0(lo)
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
Reply to: