Re: Revision 2.6.8-3 of kernel-source-2.6.8 won't build
On Thu, Aug 26, 2004 at 09:25:05AM +0200, Jens Schmalzing wrote:
> Hi,
>
> Jens Schmalzing writes:
>
> > It seems that the above-mentioned revision of kernel-source, which
> > is currently in incoming, won't build at all (see below).
>
> The attached patch seems to fix the issue; could someone have a look
> at it, please?
>
> Regards, Jens.
>
> --- ./drivers/scsi/scsi_ioctl.c.orig 2004-08-14 07:38:04.000000000 +0200
> +++ ./drivers/scsi/scsi_ioctl.c 2004-08-26 09:16:16.682243588 +0200
> @@ -6,6 +6,7 @@
> */
> #include <linux/module.h>
> #include <linux/blkdev.h>
> +#include <linux/cdrom.h>
> #include <linux/interrupt.h>
> #include <linux/errno.h>
> #include <linux/kernel.h>
> --- ./include/linux/cdrom.h.orig 2004-08-26 09:15:56.891296646 +0200
> +++ ./include/linux/cdrom.h 2004-08-26 09:14:34.434684402 +0200
> @@ -468,6 +468,7 @@
> #define GPCMD_RESERVE_RZONE_TRACK 0x53
> #define GPCMD_SCAN 0xba
> #define GPCMD_SEEK 0x2b
> +#define GPCMD_SEND_CUE_SHEET 0x5d
> #define GPCMD_SEND_DVD_STRUCTURE 0xad
> #define GPCMD_SEND_EVENT 0xa2
> #define GPCMD_SEND_KEY 0xa3
> --- ./include/scsi/scsi.h.orig 2004-08-25 19:55:21.000000000 +0200
> +++ ./include/scsi/scsi.h 2004-08-26 09:12:24.594594554 +0200
> @@ -111,6 +111,7 @@
> #define WRITE_LONG_2 0xea
> #define READ_16 0x88
> #define WRITE_16 0x8a
> +#define VERIFY_16 0x8f
> #define SERVICE_ACTION_IN 0x9e
> /* values for service action in */
> #define SAI_READ_CAPACITY_16 0x10
Mmm, i would like to have hch look over this. Can you check it in in svn, but
not add yet to 00list-4 ? This is the best way for getting review of it.
Friendly,
Sven Luther
Reply to: