kernel-patch-powerpc-2.4.26_2.4.26-1_powerpc.changes is NEW
(new) kernel-build-2.4.26-power3_2.4.26-1_powerpc.deb optional devel
Linux kernel build tree for the power3 config
This package contains part of the Linux/PowerPC kernel build tree, needed to
build external (not yet fully working) modules and initrd enabled kernel.
.
This version contains the kernel modules for Power3 based boxes.
(new) kernel-build-2.4.26-power4_2.4.26-1_powerpc.deb optional devel
Linux kernel build tree for the power4 config
This package contains part of the Linux/PowerPC kernel build tree, needed to
build external (not yet fully working) modules and initrd enabled kernel.
.
This version contains the kernel modules for G5 Power Macintosh and
other Power4 based boxes.
(new) kernel-build-2.4.26-powerpc-small_2.4.26-1_powerpc.deb optional devel
linux kernel build tree for the powerpc-small config
This package contains part of the Linux/PowerPC kernel build tree, needed to
build external modules (not yet fully working) and initrd enabled kernel.
.
This version contains the kernel build tree for Power Macintosh, CHRP,
Pegasos, IBM RS6000 CHRP and PReP computers.
(new) kernel-build-2.4.26-powerpc-smp_2.4.26-1_powerpc.deb optional devel
linux kernel build tree for the powerpc-smp config
This package contains part of the Linux/PowerPC kernel build tree, needed to
build external modules (not yet fully working) and initrd enabled kernel.
.
This version contains the kernel build tree for Power Macintosh, CHRP,
Pegasos, IBM RS6000 CHRP and PReP computers.
(new) kernel-build-2.4.26-powerpc_2.4.26-1_powerpc.deb optional devel
linux kernel build tree for the powerpc config
This package contains part of the Linux/PowerPC kernel build tree, needed to
build external modules (not yet fuly working) and initrd enabled kernel.
.
This version contains the kernel build tree for Power Macintosh, CHRP,
Pegasos, IBM RS6000 CHRP and PReP computers.
kernel-headers-2.4.26_2.4.26-1_powerpc.deb
to pool/main/k/kernel-patch-powerpc-2.4.26/kernel-headers-2.4.26_2.4.26-1_powerpc.deb
(new) kernel-image-2.4.26-power3-chrp-rs6k_2.4.26-1_powerpc.deb optional base
linux kernel IBM RS6000 CHRP binary image for the power3 config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for IBM RS6000 CHRP Power3 computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-power3-chrp_2.4.26-1_powerpc.deb optional base
linux kernel CHRP binary image for the power3 config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for CHRP Power3 boxes.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-power3-pmac_2.4.26-1_powerpc.deb optional base
linux kernel pmac and yaboot binary image for the power3 config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel image for yaboot using Power3 based boxes.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-power3-prep_2.4.26-1_powerpc.deb optional base
linux kernel PReP binary image for the power3 config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for PReP based Power3 computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-power4-chrp-rs6k_2.4.26-1_powerpc.deb optional base
linux kernel IBM RS6000 CHRP binary image for the power4 config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for IBM RS6000 CHRP computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-power4-chrp_2.4.26-1_powerpc.deb optional base
linux kernel CHRP binary image for the power4 config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for CHRP and Pegasos computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-power4-pmac_2.4.26-1_powerpc.deb optional base
linux kernel pmac and yaboot binary image for the power4 config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel modules for G4 Power Macintosh and
other yaboot using arches.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-power4-prep_2.4.26-1_powerpc.deb optional base
linux kernel PReP binary image for the power4 config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for PReP computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-chrp-rs6k_2.4.26-1_powerpc.deb optional base
linux kernel IBM RS6000 CHRP binary image for the powerpc config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for IBM RS6000 CHRP computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-chrp_2.4.26-1_powerpc.deb optional base
linux kernel CHRP binary image for the powerpc config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for CHRP and Pegasos computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-pmac_2.4.26-1_powerpc.deb optional base
linux kernel pmac and yaboot binary image for the powerpc config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for Power Macintosh computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-prep_2.4.26-1_powerpc.deb optional base
linux kernel PReP binary image for the powerpc config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for PReP computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-small-chrp-rs6k_2.4.26-1_powerpc.deb optional base
linux kernel IBM RS6000 CHRP binary image for the powerpc-small config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for IBM RS6000 CHRP computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-small-chrp_2.4.26-1_powerpc.deb optional base
linux kernel CHRP binary image for the powerpc-small config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for CHRP and Pegasos computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-small-pmac_2.4.26-1_powerpc.deb optional base
linux kernel pmac and yaboot binary image for the powerpc-small config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for Power Macintosh computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-small-prep_2.4.26-1_powerpc.deb optional base
linux kernel PReP binary image for the powerpc-small config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update.
.
This version contains the kernel images for PReP computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-smp-chrp-rs6k_2.4.26-1_powerpc.deb optional base
linux kernel IBM RS6000 CHRP binary image for the powerpc-smp config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update. This kernel is specifically
for SMP (multiple processors) powerpc systems. If you do not have more
than one CPU, then choose the non-SMP kernel image.
.
This version contains the kernel images for IBM RS6000 CHRP computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-smp-chrp_2.4.26-1_powerpc.deb optional base
linux kernel CHRP binary image for the powerpc-smp config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update. This kernel is specifically
for SMP (multiple processors) powerpc systems. If you do not have more
than one CPU, then choose the non-SMP kernel image.
.
This version contains the kernel images for CHRP and Pegasos computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-smp-pmac_2.4.26-1_powerpc.deb optional base
linux kernel pmac and yaboot binary image for the powerpc-smp config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update. This kernel is specifically
for SMP (multiple processors) powerpc systems. If you do not have more
than one CPU, then choose the non-SMP kernel image.
.
This version contains the kernel images for Power Macintosh computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-image-2.4.26-powerpc-smp-prep_2.4.26-1_powerpc.deb optional base
linux kernel PReP binary image for the powerpc-smp config
This package contains the Linux/PowerPC kernel image, the
System.map file, and the modules built by the package. It also
contains scripts that try to ensure that the system is not left in a
unbootable state after an update. This kernel is specifically
for SMP (multiple processors) powerpc systems. If you do not have more
than one CPU, then choose the non-SMP kernel image.
.
This version contains the kernel images for PReP computers.
.
Kernel image packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-modules-2.4.26-power3_2.4.26-1_powerpc.deb optional base
linux kernel modules for the power3 config
This package contains the Linux/PowerPC modules for the powerpc
variant of the powerpc kernel images, to be used with the pmac, chrp,
chrp-rs6k or prep variant of the kernel.
.
This version contains the kernel modules for Power3 based boxes.
.
Kernel modules packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-modules-2.4.26-power4_2.4.26-1_powerpc.deb optional base
linux kernel modules for the power4 config
This package contains the Linux/PowerPC modules for the powerpc
variant of the powerpc kernel images, to be used with the pmac, chrp,
chrp-rs6k or prep variant of the kernel.
.
This version contains the kernel modules for G5 Power Macintosh and
other Power4 based boxes.
.
Kernel modules packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-modules-2.4.26-powerpc-small_2.4.26-1_powerpc.deb optional base
linux kernel modules for the powerpc-small
This package contains the Linux/PowerPC modules for the powerpc-small
variant of the powerpc kernel images, to be used with the pmac, chrp,
chrp-rs6k or prep variant of the kernel.
.
This version contains the kernel modules for Power Macintosh, CHRP,
Pegasos, IBM RS6000 CHRP and PReP computers.
.
Kernel modules packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-modules-2.4.26-powerpc-smp_2.4.26-1_powerpc.deb optional base
linux kernel modules for the powerpc-smp config
This package contains the Linux/PowerPC modules for the powerpc-smp
variant of the powerpc kernel images, to be used with the pmac, chrp,
chrp-rs6k or prep variant of the kernel. These modules are specifically
for SMP (multiple processors) powerpc systems. If you do not have more
than one CPU, then choose the non-SMP module package.
.
This version contains the kernel modules for Power Macintosh, CHRP,
Pegasos, IBM RS6000 CHRP and PReP computers.
.
Kernel modules packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-modules-2.4.26-powerpc_2.4.26-1_powerpc.deb optional base
linux kernel modules for the powerpc config
This package contains the Linux/PowerPC modules for the powerpc
variant of the powerpc kernel images, to be used with the pmac, chrp,
chrp-rs6k or prep variant of the kernel.
.
This version contains the kernel modules for Power Macintosh, CHRP,
Pegasos, IBM RS6000 CHRP and PReP computers.
.
Kernel modules packages are generally produced using kernel-package,
and it is suggested that you install that package if you wish to
create a custom kernel from the sources. You will also need
kernel-patch-powerpc-2.4.26.
(new) kernel-patch-powerpc-2.4.26_2.4.26-1.dsc optional devel
(new) kernel-patch-powerpc-2.4.26_2.4.26-1.tar.gz optional devel
(new) kernel-patch-powerpc-2.4.26_2.4.26-1_all.deb optional devel
diffs to the kernel source for PowerPC
The PowerPC kernel is maintained in a multitude of source trees
separate from Linus Torvalds' official copy. This patch is based on
the BenH BitKeeper tree.
Changes: kernel-patch-powerpc-2.4.26 (2.4.26-1) unstable; urgency=low
.
* New upstream release.
* Transferred maintainership to the Debian Kernel Team.
* Patches are now separate in the powerpc/pieces directory.
Announcing to debian-devel-changes@lists.debian.org
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: