|
Questi in allegato all'email sono
i log di un'installazione di debian 9 con gli errori relativi al
network della mainboard.
Attendo riscontro. Marco. Il router in questione e' un netgear comprato presso un negozio di informatica. -------- Messaggio Inoltrato --------
Il 14/05/2018 19:33, marco pirola ha scritto: > Buona sera a tutti. Ho il seguente problema: sono possessore di una > mainboard asus h81m-c con scheda di rete 3:00.0 Ethernet controller: > Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit > Ethernet Controller (rev 0c). > Se tento un'installazione alla debian streatch partendo dalla vecchia > old-stable (debian jessie 8) non ho nessun problema con la scheda di > rete in questione. Se invece tento un'installazione pulita utilizzando > la firmware-9.4.0-amd64-netinst.iso 1 volta su 40 volte riesco ad > ottenere dal router l'indirizzo ip dinamico. Per caso è un router Telecom? > Tutte le altre volte non riesco ad ottenere nulla e quindi > impossibilitato ad andare avanti con l'installazione. Anche usando un > indirizzo ip statico della stessa classe /24 non riesco a pingare il > router. Tale situazione ce l'ho pure con la testing. Con altre > distribuzioni (ubuntu, centos, freeebsd, fedora) non ho nessun tipo di > problema. Non so piu' come muovermi. Chiedo aiuto. Anche se dovessi > aprire un bug-reporting su quale pacchetto dovrei esporlo? Sul kernel, > sul debian-installer? Qualcunaltro possessore di tale scheda madre ha > riscontrato lo stesso problema? Se si come ha fatto a risolvere tale > situazione? > > Grazie e buona serata a tutti > Luciano |
[ 0.000000] Linux version 4.9.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02) [ 0.000000] Command line: BOOT_IMAGE=/install.amd/vmlinuz vga=788 initrd=/install.amd/initrd.gz --- quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000caa7ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000caa80000-0x00000000caa86fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000caa87000-0x00000000caf1afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000caf1b000-0x00000000cb42bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cb42c000-0x00000000dd648fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd649000-0x00000000dd6d4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd6d5000-0x00000000dd6edfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dd6ee000-0x00000000ddc26fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ddc27000-0x00000000deffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: ASUS All Series/H81M-C, BIOS 3602 03/26/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back [ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back [ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back [ 0.000000] 5 base 021E000000 mask 7FFF000000 write-back [ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff9b9d800fd770] [ 0.000000] Base memory trampoline at [ffff9b9d80097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x4d139000, 0x4d139fff] PGTABLE [ 0.000000] BRK [0x4d13a000, 0x4d13afff] PGTABLE [ 0.000000] BRK [0x4d13b000, 0x4d13bfff] PGTABLE [ 0.000000] BRK [0x4d13c000, 0x4d13cfff] PGTABLE [ 0.000000] BRK [0x4d13d000, 0x4d13dfff] PGTABLE [ 0.000000] BRK [0x4d13e000, 0x4d13efff] PGTABLE [ 0.000000] BRK [0x4d13f000, 0x4d13ffff] PGTABLE [ 0.000000] BRK [0x4d140000, 0x4d140fff] PGTABLE [ 0.000000] BRK [0x4d141000, 0x4d141fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7f106000-0x7fffffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DD6DA088 000084 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DD6E8B78 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DD6DA1A0 00E9D6 (v02 ALASKA A M I 00000031 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000DDC25080 000040 [ 0.000000] ACPI: APIC 0x00000000DD6E8C88 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DD6E8D00 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: LPIT 0x00000000DD6E8D48 00005C (v01 ALASKA A M I 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DD6E8DA8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000DD6E92E8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112) [ 0.000000] ACPI: MCFG 0x00000000DD6E9DC0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DD6E9E00 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DD6E9E38 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000DD6EA1A8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: DMAR 0x00000000DD6ED720 000080 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: BGRT 0x00000000DD6ED6E8 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21eff9000-0x21effdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000caa7ffff] [ 0.000000] node 0: [mem 0x00000000caa87000-0x00000000caf1afff] [ 0.000000] node 0: [mem 0x00000000cb42c000-0x00000000dd648fff] [ 0.000000] node 0: [mem 0x00000000defff000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff] [ 0.000000] On node 0 totalpages: 2080974 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14085 pages used for memmap [ 0.000000] DMA32 zone: 901426 pages, LIFO batch:31 [ 0.000000] Normal zone: 18368 pages used for memmap [ 0.000000] Normal zone: 1175552 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcaa80000-0xcaa86fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcaf1b000-0xcb42bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd649000-0xdd6d4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd6d5000-0xdd6edfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd6ee000-0xddc26fff] [ 0.000000] PM: Registered nosave memory: [mem 0xddc27000-0xdeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff9b9f9ec00000 s105240 r8192 d29928 u524288 [ 0.000000] pcpu-alloc: s105240 r8192 d29928 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2048436 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/install.amd/vmlinuz vga=788 initrd=/install.amd/initrd.gz --- quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8095164K/8323896K available (6236K kernel code, 1159K rwdata, 2868K rodata, 1416K init, 688K bss, 228732K reserved, 0K cma-reserved) [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3491.755 MHz processor [ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.51 BogoMIPS (lpj=13967020) [ 0.000017] pid_max: default: 32768 minimum: 301 [ 0.000027] ACPI: Core revision 20160831 [ 0.007186] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.007216] Security Framework initialized [ 0.007217] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.007221] AppArmor: AppArmor disabled by boot time parameter [ 0.007479] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008500] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.008958] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008963] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.009159] CPU: Physical Processor ID: 0 [ 0.009159] CPU: Processor Core ID: 0 [ 0.009162] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.009162] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.009165] mce: CPU supports 9 MCE banks [ 0.009171] CPU0: Thermal monitoring enabled (TM1) [ 0.009182] process: using mwait in idle threads [ 0.009184] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.009184] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.009186] Spectre V2 : Mitigation: Full generic retpoline [ 0.009186] Spectre V2 : Enabling Indirect Branch Prediction Barrier [ 0.009559] Freeing SMP alternatives memory: 24K [ 0.011261] ftrace: allocating 25236 entries in 99 pages [ 0.026043] smpboot: Max logical packages: 1 [ 0.026046] DMAR: Host address width 39 [ 0.026047] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.026053] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.026053] DMAR: RMRR base: 0x000000dee79000 end: 0x000000dee87fff [ 0.026055] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0 [ 0.026056] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.026056] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.026193] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.026194] x2apic enabled [ 0.026198] Switched APIC routing to cluster x2apic. [ 0.026596] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066283] TSC deadline timer enabled [ 0.066285] smpboot: CPU0: Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.066287] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.066323] ... version: 3 [ 0.066323] ... bit width: 48 [ 0.066323] ... generic registers: 8 [ 0.066324] ... value mask: 0000ffffffffffff [ 0.066324] ... max period: 00007fffffffffff [ 0.066325] ... fixed-purpose events: 3 [ 0.066325] ... event mask: 00000007000000ff [ 0.066702] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.066773] x86: Booting SMP configuration: [ 0.066774] .... node #0, CPUs: #1 #2 #3 [ 0.073784] x86: Booted up 1 node, 4 CPUs [ 0.073786] smpboot: Total of 4 processors activated (27934.04 BogoMIPS) [ 0.076207] devtmpfs: initialized [ 0.076253] x86/mm: Memory block size: 128MB [ 0.078396] PM: Registering ACPI NVS region [mem 0xcaa80000-0xcaa86fff] (28672 bytes) [ 0.078397] PM: Registering ACPI NVS region [mem 0xdd6ee000-0xddc26fff] (5476352 bytes) [ 0.078524] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.078529] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.078557] pinctrl core: initialized pinctrl subsystem [ 0.078633] NET: Registered protocol family 16 [ 0.092031] cpuidle: using governor ladder [ 0.112045] cpuidle: using governor menu [ 0.112060] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.112061] ACPI: bus type PCI registered [ 0.112062] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.112104] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.112105] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.112110] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.112150] PCI: Using configuration type 1 for base access [ 0.112214] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.112246] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.125196] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.125197] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.125346] ACPI: Added _OSI(Module Device) [ 0.125347] ACPI: Added _OSI(Processor Device) [ 0.125347] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.125348] ACPI: Added _OSI(Processor Aggregator Device) [ 0.125493] ACPI: Executed 1 blocks of module-level executable AML code [ 0.128747] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.129339] ACPI: Dynamic OEM Table Load: [ 0.129343] ACPI: SSDT 0xFFFF9B9F94D9C800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112) [ 0.129649] ACPI: Dynamic OEM Table Load: [ 0.129653] ACPI: SSDT 0xFFFF9B9F94E47800 0005AA (v01 PmRef ApIst 00003000 INTL 20091112) [ 0.129958] ACPI: Dynamic OEM Table Load: [ 0.129961] ACPI: SSDT 0xFFFF9B9F94FC4000 000119 (v01 PmRef ApCst 00003000 INTL 20091112) [ 0.130802] ACPI: Interpreter enabled [ 0.130822] ACPI: (supports S0 S3 S4 S5) [ 0.130823] ACPI: Using IOAPIC for interrupt routing [ 0.130842] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.137372] ACPI: Power Resource [FN00] (off) [ 0.137428] ACPI: Power Resource [FN01] (off) [ 0.137480] ACPI: Power Resource [FN02] (off) [ 0.137531] ACPI: Power Resource [FN03] (off) [ 0.137582] ACPI: Power Resource [FN04] (off) [ 0.138168] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.138171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.138336] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.138432] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.138433] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.138709] PCI host bridge to bus 0000:00 [ 0.138710] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.138711] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.138712] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.138713] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.138714] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.138715] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.138716] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.138716] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.138717] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.138718] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] [ 0.138719] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.138725] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.138789] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.138814] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.138875] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.138920] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.138934] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit] [ 0.138985] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.139013] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.139042] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.139057] pci 0000:00:16.0: reg 0x10: [mem 0xf721a000-0xf721a00f 64bit] [ 0.139110] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.139169] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.139184] pci 0000:00:1a.0: reg 0x10: [mem 0xf7218000-0xf72183ff] [ 0.139255] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.139292] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.139321] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.139334] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit] [ 0.139391] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.139422] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.139448] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.139502] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.139556] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.139584] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.139638] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.139692] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.139724] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.139738] pci 0000:00:1d.0: reg 0x10: [mem 0xf7217000-0xf72173ff] [ 0.139809] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.139847] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.139875] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100 [ 0.140012] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.140022] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.140028] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.140034] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.140039] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.140048] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.140054] pci 0000:00:1f.2: reg 0x24: [mem 0xf7216000-0xf72167ff] [ 0.140083] pci 0000:00:1f.2: PME# supported from D3hot [ 0.140133] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.140145] pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit] [ 0.140161] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.140253] pci 0000:01:00.0: [10de:1c81] type 00 class 0x030000 [ 0.140262] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.140271] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.140280] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.140286] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.140292] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.140353] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.140382] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300 [ 0.140391] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.156081] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.156083] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.156084] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.156086] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.156134] acpiphp: Slot [1] registered [ 0.156137] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.156198] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.156215] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.156241] pci 0000:03:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit] [ 0.156257] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref] [ 0.156342] pci 0000:03:00.0: supports D1 D2 [ 0.156343] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.156383] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.172095] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.172098] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.172100] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff] [ 0.172104] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.172678] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.172713] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.172745] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.172778] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.172810] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.172843] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.172875] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.172907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.173134] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.173199] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.173200] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.173200] vgaarb: loaded [ 0.173201] vgaarb: bridge control possible 0000:01:00.0 [ 0.173240] PCI: Using ACPI for IRQ routing [ 0.174459] PCI: pci_cache_line_size set to 64 bytes [ 0.174488] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.174489] e820: reserve RAM buffer [mem 0xcaa80000-0xcbffffff] [ 0.174489] e820: reserve RAM buffer [mem 0xcaf1b000-0xcbffffff] [ 0.174490] e820: reserve RAM buffer [mem 0xdd649000-0xdfffffff] [ 0.174491] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.174491] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.174582] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.174585] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.176599] clocksource: Switched to clocksource hpet [ 0.180738] VFS: Disk quotas dquot_6.6.0 [ 0.180752] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.180804] pnp: PnP ACPI init [ 0.180854] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.180857] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.180973] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.180974] system 00:01: [io 0xffff] has been reserved [ 0.180976] system 00:01: [io 0xffff] has been reserved [ 0.180977] system 00:01: [io 0xffff] has been reserved [ 0.180978] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.180979] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.180980] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.180981] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.180982] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.180983] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.180985] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181002] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.181033] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.181034] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.181109] system 00:04: [io 0x0a00-0x0a1f] has been reserved [ 0.181110] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.181111] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181140] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.181309] pnp 00:06: [dma 0 disabled] [ 0.181371] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.181405] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.181407] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181528] pnp 00:08: [dma 0 disabled] [ 0.181561] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.181839] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.181841] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.181842] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.181843] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.181844] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.181845] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.181846] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.181847] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.181848] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 0.181849] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.181850] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.181851] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.181853] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182001] pnp: PnP ACPI: found 10 devices [ 0.187651] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.187662] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.187664] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.187665] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.187673] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.187674] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.187675] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.187676] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.187677] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.187678] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.187682] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2200000-0xf23fffff] [ 0.187686] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2400000-0xf25fffff 64bit pref] [ 0.187688] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.187690] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.187691] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.187693] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.187694] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.187697] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.187699] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.187702] pci 0000:00:1c.0: bridge window [mem 0xf2200000-0xf23fffff] [ 0.187704] pci 0000:00:1c.0: bridge window [mem 0xf2400000-0xf25fffff 64bit pref] [ 0.187708] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.187710] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.187713] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff] [ 0.187716] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.187720] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.187721] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.187722] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.187723] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.187724] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.187725] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.187725] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.187726] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.187727] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.187728] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window] [ 0.187729] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.187730] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.187730] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.187731] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.187732] pci_bus 0000:02: resource 1 [mem 0xf2200000-0xf23fffff] [ 0.187733] pci_bus 0000:02: resource 2 [mem 0xf2400000-0xf25fffff 64bit pref] [ 0.187734] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.187735] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.187736] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.187812] NET: Registered protocol family 2 [ 0.187916] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.187992] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.188096] TCP: Hash tables configured (established 65536 bind 65536) [ 0.188108] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.188126] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.188166] NET: Registered protocol family 1 [ 0.232681] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.232689] PCI: CLS 64 bytes, default 64 [ 0.232717] Unpacking initramfs... [ 0.401339] Freeing initrd memory: 15336K [ 0.401370] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.401371] software IO TLB [mem 0xd9649000-0xdd649000] (64MB) mapped at [ffff9b9e59649000-ffff9b9e5d648fff] [ 0.401600] audit: initializing netlink subsys (disabled) [ 0.401612] audit: type=2000 audit(1526390923.400:1): initialized [ 0.401872] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 0.401898] zbud: loaded [ 0.402415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.402435] io scheduler noop registered [ 0.402436] io scheduler deadline registered [ 0.402445] io scheduler cfq registered (default) [ 0.402774] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.402777] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.402785] vesafb: mode is 800x600x16, linelength=1600, pages=2 [ 0.402786] vesafb: scrolling: redraw [ 0.402787] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.402795] vesafb: framebuffer at 0xf1000000, mapped to 0xffffbdbac1200000, using 1875k, total 16384k [ 0.415382] Console: switching to colour frame buffer device 100x37 [ 0.427820] fb0: VESA VGA frame buffer device [ 0.427830] intel_idle: MWAIT substates: 0x42120 [ 0.427831] intel_idle: v0.4.1 model 0x3C [ 0.427932] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.428021] GHES: HEST is not enabled! [ 0.428058] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.448524] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.448858] Linux agpgart interface v0.103 [ 0.448906] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 0.448907] AMD IOMMUv2 functionality not available on this system [ 0.449146] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.449146] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.449774] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.449872] mousedev: PS/2 mouse device common for all mice [ 0.449898] rtc_cmos 00:02: RTC can wake from S4 [ 0.449999] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.450022] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.450028] intel_pstate: Intel P-state driver initializing [ 0.450312] ledtrig-cpu: registered to indicate activity on CPUs [ 0.451563] NET: Registered protocol family 10 [ 0.452085] mip6: Mobile IPv6 [ 0.452089] NET: Registered protocol family 17 [ 0.452093] mpls_gso: MPLS GSO support [ 0.452580] microcode: sig=0x306c3, pf=0x2, revision=0x24 [ 0.452761] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.453068] registered taskstats version 1 [ 0.453101] zswap: loaded using pool lzo/zbud [ 0.453364] ima: No TPM chip found, activating TPM-bypass! [ 0.454223] rtc_cmos 00:02: setting system clock to 2018-05-15 13:28:43 UTC (1526390923) [ 0.454392] PM: Hibernation image not present or could not be loaded. [ 0.457289] Freeing unused kernel memory: 1416K [ 0.457291] Write protecting the kernel read-only data: 12288k [ 0.458397] Freeing unused kernel memory: 1940K [ 0.466044] Freeing unused kernel memory: 1228K [ 0.474130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.477703] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.488840] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 0.488944] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 0.488955] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 0.488968] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 0.489898] random: udevadm: uninitialized urandom read (16 bytes read) [ 0.489938] random: udevadm: uninitialized urandom read (16 bytes read) [ 0.491274] random: udevadm: uninitialized urandom read (16 bytes read) [ 0.491294] random: udevadm: uninitialized urandom read (16 bytes read) [ 0.491685] random: udevadm: uninitialized urandom read (16 bytes read) [ 0.491760] random: udevadm: uninitialized urandom read (16 bytes read) [ 0.522058] ACPI: bus type USB registered [ 0.522072] usbcore: registered new interface driver usbfs [ 0.522078] usbcore: registered new interface driver hub [ 0.522089] usbcore: registered new device driver usb [ 0.522550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.522589] SCSI subsystem initialized [ 0.522788] ehci-pci: EHCI PCI platform driver [ 0.522911] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.522914] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.522923] ehci-pci 0000:00:1a.0: debug port 2 [ 0.523866] libata version 3.00 loaded. [ 0.526825] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.526896] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7218000 [ 0.528926] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.528927] ACPI: Thermal Zone [TZ00] (28 C) [ 0.529075] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.529076] ACPI: Thermal Zone [TZ01] (30 C) [ 0.540656] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.540799] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.540800] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.540801] usb usb1: Product: EHCI Host Controller [ 0.540802] usb usb1: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd [ 0.540802] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.540928] hub 1-0:1.0: USB hub found [ 0.540937] hub 1-0:1.0: 2 ports detected [ 0.541175] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.541178] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.541187] ehci-pci 0000:00:1d.0: debug port 2 [ 0.545077] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.545088] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000 [ 0.560656] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.560685] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.560686] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.560687] usb usb2: Product: EHCI Host Controller [ 0.560688] usb usb2: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd [ 0.560688] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.560836] hub 2-0:1.0: USB hub found [ 0.560839] hub 2-0:1.0: 2 ports detected [ 0.561011] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.561014] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.562076] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.562079] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.562239] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.562248] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.562249] usb usb3: Product: xHCI Host Controller [ 0.562250] usb usb3: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd [ 0.562250] usb usb3: SerialNumber: 0000:00:14.0 [ 0.562379] hub 3-0:1.0: USB hub found [ 0.562394] hub 3-0:1.0: 10 ports detected [ 0.563415] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.563417] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.563517] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.563518] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.563518] usb usb4: Product: xHCI Host Controller [ 0.563519] usb usb4: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd [ 0.563520] usb usb4: SerialNumber: 0000:00:14.0 [ 0.563619] hub 4-0:1.0: USB hub found [ 0.563626] hub 4-0:1.0: 2 ports detected [ 0.563771] ahci 0000:00:1f.2: version 3.0 [ 0.563884] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x23 impl SATA mode [ 0.563885] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems [ 0.585219] scsi host0: ahci [ 0.585388] scsi host1: ahci [ 0.585494] scsi host2: ahci [ 0.585601] scsi host3: ahci [ 0.585690] scsi host4: ahci [ 0.585751] scsi host5: ahci [ 0.585781] ata1: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216100 irq 27 [ 0.585783] ata2: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216180 irq 27 [ 0.585783] ata3: DUMMY [ 0.585784] ata4: DUMMY [ 0.585784] ata5: DUMMY [ 0.585785] ata6: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216380 irq 27 [ 0.868655] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.888669] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 0.888670] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.899286] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.899303] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.899320] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.900392] ata2.00: ATA-8: ST500DM002-1BD142, HP73, max UDMA/100 [ 0.900394] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.900828] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359) [ 0.901435] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff9b9f961eb5a0), AE_NOT_FOUND (20160831/psparse-543) [ 0.902449] ata1.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100 [ 0.902546] ata2.00: configured for UDMA/100 [ 0.902553] ata6.00: supports DRM functions and may not be fully accessible [ 0.903406] ata1.00: configured for UDMA/100 [ 0.903412] ata6.00: ATA-9: Samsung SSD 750 EVO 500GB, MAT01B6Q, max UDMA/133 [ 0.903415] ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 0.904240] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359) [ 0.904613] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff9b9f961eb5a0), AE_NOT_FOUND (20160831/psparse-543) [ 0.905206] ata6.00: supports DRM functions and may not be fully accessible [ 0.906336] ata6.00: configured for UDMA/133 [ 0.907875] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5 [ 0.917604] scsi 1:0:0:0: Direct-Access ATA ST500DM002-1BD14 HP73 PQ: 0 ANSI: 5 [ 0.948925] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 750 1B6Q PQ: 0 ANSI: 5 [ 0.990607] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 0.990614] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 0.990615] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 0.990638] sd 1:0:0:0: [sda] Write Protect is off [ 0.990639] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.990648] sd 5:0:0:0: [sdb] Write Protect is off [ 0.990649] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.990650] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.990669] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.992643] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 0.993005] sd 5:0:0:0: [sdb] Attached SCSI disk [ 0.993326] sda: sda1 [ 0.993573] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.004106] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.004107] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.004289] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.016955] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.016957] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.017099] hub 1-1:1.0: USB hub found [ 1.017207] hub 1-1:1.0: 4 ports detected [ 1.041132] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.041133] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.041372] hub 2-1:1.0: USB hub found [ 1.041472] hub 2-1:1.0: 6 ports detected [ 1.105145] random: fast init done [ 1.265333] usb 3-2: New USB device found, idVendor=0a12, idProduct=0001 [ 1.265334] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.265335] usb 3-2: Product: Bluetooth2.1+EDR CLASS1 [ 1.384679] usb 3-6: new high-speed USB device number 3 using xhci_hcd [ 1.404685] tsc: Refined TSC clocksource calibration: 3491.913 MHz [ 1.404690] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255790e5ea, max_idle_ns: 440795224414 ns [ 1.529445] usb 3-6: New USB device found, idVendor=0781, idProduct=5151 [ 1.529447] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.529448] usb 3-6: Product: Cruzer Micro [ 1.529448] usb 3-6: Manufacturer: SanDisk Corporation [ 1.529449] usb 3-6: SerialNumber: 200548611115FFB20730 [ 1.530798] usb-storage 3-6:1.0: USB Mass Storage device detected [ 1.530950] scsi host6: usb-storage 3-6:1.0 [ 1.530998] usbcore: registered new interface driver usb-storage [ 1.531196] usbcore: registered new interface driver uas [ 1.648679] usb 3-9: new low-speed USB device number 4 using xhci_hcd [ 1.792206] usb 3-9: New USB device found, idVendor=093a, idProduct=2510 [ 1.792208] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.792209] usb 3-9: Product: USB Optical Mouse [ 1.792210] usb 3-9: Manufacturer: PixArt [ 1.793673] hidraw: raw HID events driver (C) Jiri Kosina [ 1.795258] usbcore: registered new interface driver usbhid [ 1.795259] usbhid: USB HID core driver [ 1.795837] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:093A:2510.0001/input/input1 [ 1.795912] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-9/input0 [ 1.912718] usb 3-10: new full-speed USB device number 5 using xhci_hcd [ 2.055920] usb 3-10: New USB device found, idVendor=28de, idProduct=1142 [ 2.055932] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.055933] usb 3-10: Product: Steam Controller [ 2.055933] usb 3-10: Manufacturer: Valve Software [ 2.058089] input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:28DE:1142.0002/input/input2 [ 2.116999] hid-generic 0003:28DE:1142.0002: input,hidraw1: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:14.0-10/input0 [ 2.119166] hid-generic 0003:28DE:1142.0003: hiddev0,hidraw2: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-10/input1 [ 2.121386] hid-generic 0003:28DE:1142.0004: hiddev0,hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-10/input2 [ 2.123617] hid-generic 0003:28DE:1142.0005: hiddev0,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-10/input3 [ 2.125714] hid-generic 0003:28DE:1142.0006: hiddev0,hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-10/input4 [ 2.428910] clocksource: Switched to clocksource tsc [ 2.557359] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2 [ 2.558348] sd 6:0:0:0: [sdc] 4001760 512-byte logical blocks: (2.05 GB/1.91 GiB) [ 2.558531] sd 6:0:0:0: [sdc] Write Protect is off [ 2.558536] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 2.558701] sd 6:0:0:0: [sdc] No Caching mode page found [ 2.558705] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 2.560922] sdc: sdc1 sdc2 [ 2.562409] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 7.150706] random: crng init done [ 8.587157] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8.588837] ISO 9660 Extensions: RRIP_1991A [ 18.128417] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 18.128423] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 18.138375] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffbdbac0cb9000, 78:24:af:40:17:ea, XID 0c000800 IRQ 28 [ 18.138377] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 18.138775] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 19.347154] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168g-2.fw (-2) [ 19.347156] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2 [ 19.347158] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2) [ 19.360073] r8169 0000:03:00.0 enp3s0: link down [ 19.360090] r8169 0000:03:00.0 enp3s0: link down [ 19.360131] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 23.351409] isofs_fill_super: bread failed, dev=sdb4, iso_blknum=16, block=32 [ 23.352365] isofs_fill_super: bread failed, dev=sdb4, iso_blknum=16, block=32 [ 23.700545] isofs_fill_super: bread failed, dev=sdb4, iso_blknum=16, block=32 [ 23.701510] isofs_fill_super: bread failed, dev=sdb4, iso_blknum=16, block=32 [ 29.096145] isofs_fill_super: bread failed, dev=sdb4, iso_blknum=16, block=32 [ 29.097034] isofs_fill_super: bread failed, dev=sdb4, iso_blknum=16, block=32 [ 29.386942] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 29.386947] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 29.402832] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffbdbac0cb9000, 78:24:af:40:17:ea, XID 0c000880 IRQ 28 [ 29.402833] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 29.403350] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 30.836907] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw [ 30.924611] r8169 0000:03:00.0 enp3s0: link down [ 30.924660] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 32.670064] r8169 0000:03:00.0 enp3s0: link up [ 32.670092] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 92.896826] ------------[ cut here ]------------ [ 92.896850] WARNING: CPU: 0 PID: 0 at /build/linux-YDazDa/linux-4.9.82/net/sched/sch_generic.c:316 dev_watchdog+0x233/0x240 [ 92.896852] NETDEV WATCHDOG: enp3s0 (r8169): transmit queue 0 timed out [ 92.896854] Modules linked in: r8169 mii nls_ascii nls_cp437 vfat fat nls_utf8 isofs hid_generic usbhid hid uas usb_storage sr_mod cdrom sd_mod ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common fan thermal [last unloaded: mii] [ 92.896900] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-6-amd64 #1 Debian 4.9.82-1+deb9u3 [ 92.896902] Hardware name: ASUS All Series/H81M-C, BIOS 3602 03/26/2018 [ 92.896905] 0000000000000000 ffffffffb6f2e074 ffff9b9f9ec03e20 0000000000000000 [ 92.896913] ffffffffb6c776be 0000000000000000 ffff9b9f9ec03e78 ffff9b9f912a6000 [ 92.896919] 0000000000000000 ffff9b9f943a8880 0000000000000001 ffffffffb6c7773f [ 92.896925] Call Trace: [ 92.896929] <IRQ> [ 92.896938] [<ffffffffb6f2e074>] ? dump_stack+0x5c/0x78 [ 92.896946] [<ffffffffb6c776be>] ? __warn+0xbe/0xe0 [ 92.896952] [<ffffffffb6c7773f>] ? warn_slowpath_fmt+0x5f/0x80 [ 92.896961] [<ffffffffb721125d>] ? _raw_spin_lock+0x1d/0x20 [ 92.896966] [<ffffffffb6cb6f41>] ? enqueue_task_rt+0x1b1/0x2e0 [ 92.896972] [<ffffffffb71344e3>] ? dev_watchdog+0x233/0x240 [ 92.896977] [<ffffffffb71342b0>] ? qdisc_rcu_free+0x40/0x40 [ 92.896985] [<ffffffffb6ce5182>] ? call_timer_fn+0x32/0x120 [ 92.896991] [<ffffffffb6ce5687>] ? run_timer_softirq+0x1d7/0x420 [ 92.896998] [<ffffffffb6cf6070>] ? tick_sched_handle.isra.12+0x50/0x50 [ 92.897003] [<ffffffffb6cf6040>] ? tick_sched_handle.isra.12+0x20/0x50 [ 92.897008] [<ffffffffb6cf60a8>] ? tick_sched_timer+0x38/0x70 [ 92.897014] [<ffffffffb7214dda>] ? __do_softirq+0x10a/0x29e [ 92.897020] [<ffffffffb6c7d7fe>] ? irq_exit+0xae/0xb0 [ 92.897025] [<ffffffffb72148a4>] ? smp_apic_timer_interrupt+0x44/0x50 [ 92.897030] [<ffffffffb7213196>] ? apic_timer_interrupt+0x96/0xa0 [ 92.897032] <EOI> [ 92.897041] [<ffffffffb70d44a2>] ? cpuidle_enter_state+0xa2/0x2d0 [ 92.897047] [<ffffffffb6cba404>] ? cpu_startup_entry+0x154/0x240 [ 92.897054] [<ffffffffb793df62>] ? start_kernel+0x44b/0x46b [ 92.897059] [<ffffffffb793d120>] ? early_idt_handler_array+0x120/0x120 [ 92.897063] [<ffffffffb793d408>] ? x86_64_start_kernel+0x14c/0x170 [ 92.897066] ---[ end trace 91fcf3e91b65f337 ]--- [ 92.915201] r8169 0000:03:00.0 enp3s0: link up [ 159.990228] r8169 0000:03:00.0 enp3s0: link up [ 251.898377] r8169 0000:03:00.0 enp3s0: link up [ 336.894218] r8169 0000:03:00.0 enp3s0: link up [ 428.034335] r8169 0000:03:00.0 enp3s0: link up [ 514.054228] r8169 0000:03:00.0 enp3s0: link up [ 556.945813] usb 3-5: new high-speed USB device number 6 using xhci_hcd [ 557.089107] usb 3-5: New USB device found, idVendor=125f, idProduct=c96a [ 557.089113] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 557.089117] usb 3-5: Product: ADATA USB Flash Drive [ 557.089120] usb 3-5: Manufacturer: ADATA [ 557.089123] usb 3-5: SerialNumber: 119241821229007C [ 557.089789] usb-storage 3-5:1.0: USB Mass Storage device detected [ 557.090702] scsi host7: usb-storage 3-5:1.0 [ 558.102252] scsi 7:0:0:0: Direct-Access ADATA USB Flash Drive 0.00 PQ: 0 ANSI: 2 [ 558.103599] sd 7:0:0:0: [sdd] 31381504 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 558.103728] sd 7:0:0:0: [sdd] Write Protect is off [ 558.103730] sd 7:0:0:0: [sdd] Mode Sense: 00 00 00 00 [ 558.103973] sd 7:0:0:0: [sdd] Asking for cache data failed [ 558.103974] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 558.107088] sdd: sdd1 [ 558.118422] sd 7:0:0:0: [sdd] Attached SCSI removable disk [ 604.946354] r8169 0000:03:00.0 enp3s0: link up