Problema con hdd usb3
Ciao a tutti.
Come da oggetto, oggi non riesco più vedere i drive usb3 (una pennetta
sandisk e un disco seagate), che fino a ieri sera andavano alla grande.
Se li collego alle prese usb2, funzionano; se collego unità usb2 alla
scheda usb3, queste funzionano.
L'hw è: scheda madre Asus M3A79T-DELUXE;
proc: AMD PHENOM 9650;
ram: G.Skill DDR2 1066: F2-8500CL5D-4GBPK x 2;
scheda usb3 aggiunta perché non presente nella scheda madre:
PEXUSB312EIC
Uso una debian stabile aggiornata oggi per i bug di isc-dhcp.
Ho provato a seguire alcune guide trovate in internet che suggerivano
di aggiungere al boot il parametro usbcore.autosospend=-1, ma non ha
funzionato.
Alcune informazioni:
uname mi dà:
~# uname -a
Linux xxxx 4.9.0-6-amd64 #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02)
x86_64 GNU/Linux ~#
Questo è il risultato del comando lsmod:
lucia: ~# lsmod | grep usb
usbhid 53248 0
hid 122880 2 hid_generic,usbhid
usb_storage 73728 1 uas
usbcore 253952 9
usbhid,usb_storage,ehci_hcd,ohci_pci,xhci_pci,uas,ohci_hcd,xhci_hcd,ehci_pci
usb_common 16384 1 usbcore scsi_mod 225280 6
sd_mod,usb_storage,libata,uas,sr_mod,sg ~#
lspci restituisce,per usb:
~# lspci -v
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem:
ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI0 Controller Flags: bus
master, 66MHz, medium devsel, latency 64, IRQ 16, NUMA node 0 Memory at
fe6fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use:
ohci-pci Kernel modules: ohci_pci
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0
USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer
Inc. SB7x0 USB OHCI1 Controller Flags: bus master, 66MHz, medium
devsel, latency 64, IRQ 16, NUMA node 0 Memory at fe6fd000 (32-bit,
non-prefetchable) [size=4K] Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem:
ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB EHCI Controller Flags: bus
master, 66MHz, medium devsel, latency 64, IRQ 17, NUMA node 0 Memory at
fe6ff000 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power
Management version 2 Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem:
ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI0 Controller Flags: bus
master, 66MHz, medium devsel, latency 64, IRQ 18, NUMA node 0 Memory at
fe6fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use:
ohci-pci Kernel modules: ohci_pci
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0
USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer
Inc. SB7x0 USB OHCI1 Controller Flags: bus master, 66MHz, medium
devsel, latency 64, IRQ 18, NUMA node 0 Memory at fe6fb000 (32-bit,
non-prefetchable) [size=4K] Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem:
Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI
Controller Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19,
NUMA node 0 Memory at fe6fa800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2 Capabilities: [e4] Debug
port: BAR=1 offset=00e0 Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI]) Subsystem:
Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2
Controller Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18,
NUMA node 0 Memory at fe6f9000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci Kernel modules: ohci_pci
04:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 3102
(prog-if 30 [XHCI]) Subsystem: ASMedia Technology Inc. Device 1242
Flags: bus master, fast devsel, latency 0, IRQ 19, NUMA node 0
Memory at feaf8000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [68] MSI-X: Enable+ Count=8 Masked-
Capabilities: [78] Power Management version 3
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [200] Advanced Error Reporting
Capabilities: [280] #19
Capabilities: [300] Latency Tolerance Reporting
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
~#
L'ultima parte, qui sopra, riguarda proprio la scheda aggiuntiva usb3.
Tempo fa avevo avuto lo stesso problema col portatile, risolto
collegando le stesse unità prima di accendere il pc, che così
funzionavano: provato col pc fisso, lo stratagemma non va.
Cosa posso fare?
Grazie in anticipo
Giuliano
--
« I don't know what's the matter with people: they don't learn by
understanding; they learn by some other way — by rote or something.
Their knowledge is so fragile »
Richard Phillips Feynman,
Surely You're Joking, Mr. Feynman!: Adventures of a Curious Character.
Reply to: