Re: lettore memory card
Il 05/11/2013 13:15, Luca Costantino ha scritto:
Il 05 novembre 2013 13:13, Giovanni Bellonio
<giovanni.bellonio@inventati.org> ha scritto:
sul mio notebook (acer aspire 5930G) è presente un lettore di memory card
integrato (legge SD MS/pro MMC SM XD), che ad oggi non sono riuscito ad
utilizzare sotto debian (utilizzo una testing a 64 bit).
inserendo una schedina sd cosa compare in dmesg?
luca
quello che segue è il risultato, moooolto lungo di dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10-2-amd64
(debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) )
#1 SMP Debian 3.10.7-1 (2013-08-17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10-2-amd64
root=UUID=5d479185-7134-44b8-8a0a-86cf9e442a80 ro quiet
acpi_enforce_resources=lax
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9bbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf9bc000-0x00000000bfa0efff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb07fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfb08000-0x00000000bfd0efff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd18000-0x00000000bfd1efff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd63fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd64000-0x00000000bfd9efff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfde1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfde2000-0x00000000bfdfefff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Acer Aspire 5930
/Eiger , BIOS V1.23 10/28/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f7300-0x000f730f] mapped
at [ffff8800000f7300]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0186e000, 0x0186efff] PGTABLE
[ 0.000000] BRK [0x0186f000, 0x0186ffff] PGTABLE
[ 0.000000] BRK [0x01870000, 0x01870fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01871000, 0x01871fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf8a0fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf7fffff] page 2M
[ 0.000000] [mem 0xbf800000-0xbf8a0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf8a7000-0xbf9bbfff]
[ 0.000000] [mem 0xbf8a7000-0xbf9bbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfa0f000-0xbfb07fff]
[ 0.000000] [mem 0xbfa0f000-0xbfb07fff] page 4k
[ 0.000000] BRK [0x01872000, 0x01872fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbfd0f000-0xbfd17fff]
[ 0.000000] [mem 0xbfd0f000-0xbfd17fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfd1f000-0xbfd63fff]
[ 0.000000] [mem 0xbfd1f000-0xbfd63fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfd9f000-0xbfde1fff]
[ 0.000000] [mem 0xbfd9f000-0xbfde1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfdff000-0xbfdfffff]
[ 0.000000] [mem 0xbfdff000-0xbfdfffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3692e000-0x3748efff]
[ 0.000000] ACPI: RSDP 00000000000f7160 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000bfdf447d 0005C (v01 ACRSYS ACRPRDCT
06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 00000000bfde4000 000F4 (v03 INTEL CRESTLNE
06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bfde5000 0A70D (v02 Intel CANTIGA
06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfd9efc0 00040
[ 0.000000] ACPI: HPET 00000000bfdfed86 00038 (v01 INTEL CRESTLNE
06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bfdfedbe 0003C (v01 INTEL CRESTLNE
06040000 LOHR 0000005A)
[ 0.000000] ACPI: SLIC 00000000bfdfedfa 00176 (v01 ACRSYS ACRPRDCT
06040000 ANNI 00000001)
[ 0.000000] ACPI: APIC 00000000bfdfef70 00068 (v01 PTLTD ? APIC
06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfdfefd8 00028 (v01 PTLTD $SBFTBL$
06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfde3000 00655 (v01 PmRef CpuPm
00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffbfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD ->
[ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf8a0fff]
[ 0.000000] node 0: [mem 0xbf8a7000-0xbf9bbfff]
[ 0.000000] node 0: [mem 0xbfa0f000-0xbfb07fff]
[ 0.000000] node 0: [mem 0xbfd0f000-0xbfd17fff]
[ 0.000000] node 0: [mem 0xbfd1f000-0xbfd63fff]
[ 0.000000] node 0: [mem 0xbfd9f000-0xbfde1fff]
[ 0.000000] node 0: [mem 0xbfdff000-0xbfdfffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1047261
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10680 pages used for memmap
[ 0.000000] DMA32 zone: 781121 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 -
000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf8a1000 -
00000000bf8a7000
[ 0.000000] PM: Registered nosave memory: 00000000bf9bc000 -
00000000bfa0f000
[ 0.000000] PM: Registered nosave memory: 00000000bfb08000 -
00000000bfd0f000
[ 0.000000] PM: Registered nosave memory: 00000000bfd18000 -
00000000bfd1f000
[ 0.000000] PM: Registered nosave memory: 00000000bfd64000 -
00000000bfd9f000
[ 0.000000] PM: Registered nosave memory: 00000000bfde2000 -
00000000bfdff000
[ 0.000000] PM: Registered nosave memory: 00000000bfe00000 -
0000000100000000
[ 0.000000] e820: [mem 0xbfe00000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s84928
r8192 d21568 u1048576
[ 0.000000] pcpu-alloc: s84928 r8192 d21568 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1032920
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-2-amd64
root=UUID=5d479185-7134-44b8-8a0a-86cf9e442a80 ro quiet
acpi_enforce_resources=lax
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4044752k/5242880k available (3642k kernel code,
1053836k absent, 144292k reserved, 3127k data, 920k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2527.565 MHz processor
[ 0.004005] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5055.13 BogoMIPS (lpj=10110260)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004078] Security Framework initialized
[ 0.004088] AppArmor: AppArmor disabled by boot time parameter
[ 0.004090] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.008366] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.011698] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.013220] Mount-cache hash table entries: 256
[ 0.013643] Initializing cgroup subsys memory
[ 0.013677] Initializing cgroup subsys devices
[ 0.013681] Initializing cgroup subsys freezer
[ 0.013685] Initializing cgroup subsys net_cls
[ 0.013689] Initializing cgroup subsys blkio
[ 0.013692] Initializing cgroup subsys perf_event
[ 0.013753] CPU: Physical Processor ID: 0
[ 0.013755] CPU: Processor Core ID: 0
[ 0.013760] mce: CPU supports 6 MCE banks
[ 0.013773] CPU0: Thermal monitoring enabled (TM1)
[ 0.013787] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.013787] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.013787] tlb_flushall_shift: -1
[ 0.013904] Freeing SMP alternatives: 12k freed
[ 0.014636] ACPI: Core revision 20130328
[ 0.021589] ACPI: All ACPI Tables successfully acquired
[ 0.024538] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064999] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @
2.53GHz (fam: 06, model: 17, stepping: 06)
[ 0.068000] APIC calibration not consistent with PM-Timer: 331ms
instead of 100ms
[ 0.068000] APIC delta adjusted to PM-Timer: 1662685 (5520048)
[ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events,
Intel PMU driver.
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] smpboot: Booting Node 0, Processors #1 OK
[ 0.079239] Brought up 2 CPUs
[ 0.079247] smpboot: Total of 2 processors activated (10110.26 BogoMIPS)
[ 0.079365] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.084080] devtmpfs: initialized
[ 0.088069] PM: Registering ACPI NVS region [mem
0xbfd64000-0xbfd9efff] (241664 bytes)
[ 0.088425] regulator-dummy: no parameters
[ 0.088544] NET: Registered protocol family 16
[ 0.088821] ACPI: bus type PCI registered
[ 0.088826] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.088951] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.088956] PCI: not using MMCONFIG
[ 0.088959] PCI: Using configuration type 1 for base access
[ 0.088959] bio: create slab <bio-0> at 0
[ 0.088959] ACPI: Added _OSI(Module Device)
[ 0.088959] ACPI: Added _OSI(Processor Device)
[ 0.088959] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.088959] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.094187] ACPI: EC: Look up EC in DSDT
[ 0.099985] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.101145] ACPI: SSDT 00000000bfd1ac20 00265 (v01 PmRef Cpu0Ist
00003000 INTL 20050624)
[ 0.101689] ACPI: Dynamic OEM Table Load:
[ 0.101694] ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist
00003000 INTL 20050624)
[ 0.101895] ACPI: SSDT 00000000bfd18620 00549 (v01 PmRef Cpu0Cst
00003001 INTL 20050624)
[ 0.102402] ACPI: Dynamic OEM Table Load:
[ 0.102406] ACPI: SSDT (null) 00549 (v01 PmRef Cpu0Cst
00003001 INTL 20050624)
[ 0.120458] ACPI: SSDT 00000000bfd19ca0 001CF (v01 PmRef ApIst
00003000 INTL 20050624)
[ 0.124245] ACPI: Dynamic OEM Table Load:
[ 0.124250] ACPI: SSDT (null) 001CF (v01 PmRef ApIst
00003000 INTL 20050624)
[ 0.136152] ACPI: SSDT 00000000bfd19f20 0008D (v01 PmRef ApCst
00003000 INTL 20050624)
[ 0.136690] ACPI: Dynamic OEM Table Load:
[ 0.136694] ACPI: SSDT (null) 0008D (v01 PmRef ApCst
00003000 INTL 20050624)
[ 0.160105] ACPI: Interpreter enabled
[ 0.160119] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S1_] (20130328/hwxface-568)
[ 0.160127] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S2_] (20130328/hwxface-568)
[ 0.160155] ACPI: (supports S0 S3 S4 S5)
[ 0.160158] ACPI: Using IOAPIC for interrupt routing
[ 0.160195] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.164045] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
ACPI motherboard resources
[ 0.200921] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.201100] ACPI: No dock devices found.
[ 0.217135] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.217135] PCI host bridge to bus 0000:00
[ 0.217135] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.217135] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.217135] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.217135] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.217135] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000d3fff]
[ 0.217135] pci_bus 0000:00: root bus resource [mem
0x000d4000-0x000d7fff]
[ 0.217135] pci_bus 0000:00: root bus resource [mem
0x000d8000-0x000dbfff]
[ 0.217135] pci_bus 0000:00: root bus resource [mem
0x000dc000-0x000dffff]
[ 0.217135] pci_bus 0000:00: root bus resource [mem
0x000e0000-0x000e3fff]
[ 0.217135] pci_bus 0000:00: root bus resource [mem
0xc0000000-0xfebfffff]
[ 0.217135] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.217135] DMAR: Forcing write-buffer flush capability
[ 0.217135] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.217288] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 0.217359] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.217491] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.217554] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.217691] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.217771] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.217855] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.218015] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.218091] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.218153] pci 0000:00:1a.2: reg 20: [io 0x1840-0x185f]
[ 0.218299] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.218387] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.218418] pci 0000:00:1a.7: reg 10: [mem 0xf6504800-0xf6504bff]
[ 0.218544] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.218621] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.218699] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.218723] pci 0000:00:1b.0: reg 10: [mem 0xf6500000-0xf6503fff 64bit]
[ 0.218822] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.218900] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.218973] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.219075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.219219] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.219319] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.219475] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.219577] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.219727] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.219828] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.219982] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.220091] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.220254] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.220315] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
[ 0.220432] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.220506] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.220569] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
[ 0.220690] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.220765] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.220828] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
[ 0.220952] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.221040] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.221071] pci 0000:00:1d.7: reg 10: [mem 0xf6504c00-0xf6504fff]
[ 0.221196] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.221265] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.221337] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.221440] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.221515] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.221745] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.221774] pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7]
[ 0.221787] pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7]
[ 0.221800] pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef]
[ 0.221813] pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3]
[ 0.221827] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df]
[ 0.221840] pci 0000:00:1f.2: reg 24: [mem 0xf6504000-0xf65047ff]
[ 0.221909] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.222072] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.222097] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 0.222128] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.222444] pci 0000:01:00.0: [10de:0649] type 00 class 0x030000
[ 0.222509] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
[ 0.222574] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.222633] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
[ 0.222673] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.222713] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.232044] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.232051] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.232057] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.232065] pci 0000:00:01.0: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.232403] pci 0000:02:00.0: [11ab:436b] type 00 class 0x020000
[ 0.232585] pci 0000:02:00.0: reg 10: [mem 0xf6100000-0xf6103fff 64bit]
[ 0.232684] pci 0000:02:00.0: reg 18: [io 0x3000-0x30ff]
[ 0.233046] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233610] pci 0000:02:00.0: supports D1 D2
[ 0.233614] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233760] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.233953] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.233960] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.233967] pci 0000:00:1c.0: bridge window [mem 0xf6100000-0xf61fffff]
[ 0.234145] pci 0000:03:00.0: [8086:4232] type 00 class 0x028000
[ 0.234200] pci 0000:03:00.0: reg 10: [mem 0xf6200000-0xf6201fff 64bit]
[ 0.234464] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.244048] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.244058] pci 0000:00:1c.1: bridge window [mem 0xf6200000-0xf62fffff]
[ 0.244166] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.244363] acpiphp: Slot [1] registered
[ 0.244395] acpiphp_glue: sibling found, but _SUN doesn't match!
[ 0.244424] acpiphp_glue: sibling found, but _SUN doesn't match!
[ 0.244452] acpiphp_glue: sibling found, but _SUN doesn't match!
[ 0.244480] acpiphp_glue: sibling found, but _SUN doesn't match!
[ 0.244492] pci 0000:00:1c.3: PCI bridge to [bus 05-07]
[ 0.244500] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.244507] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf60fffff]
[ 0.244517] pci 0000:00:1c.3: bridge window [mem
0xf0000000-0xf1ffffff 64bit pref]
[ 0.244656] acpiphp: Slot [1-1] registered
[ 0.244669] pci 0000:00:1c.4: PCI bridge to [bus 08-0a]
[ 0.244676] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
[ 0.244683] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.244693] pci 0000:00:1c.4: bridge window [mem
0xf2000000-0xf3ffffff 64bit pref]
[ 0.244822] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[ 0.244838] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.244843] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.244848] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.244853] pci 0000:00:1e.0: bridge window [mem
0x000d0000-0x000d3fff] (subtractive decode)
[ 0.244858] pci 0000:00:1e.0: bridge window [mem
0x000d4000-0x000d7fff] (subtractive decode)
[ 0.244863] pci 0000:00:1e.0: bridge window [mem
0x000d8000-0x000dbfff] (subtractive decode)
[ 0.244868] pci 0000:00:1e.0: bridge window [mem
0x000dc000-0x000dffff] (subtractive decode)
[ 0.244872] pci 0000:00:1e.0: bridge window [mem
0x000e0000-0x000e3fff] (subtractive decode)
[ 0.244877] pci 0000:00:1e.0: bridge window [mem
0xc0000000-0xfebfffff] (subtractive decode)
[ 0.244921] acpi PNP0A08:00: ACPI _OSC support notification failed,
disabling PCIe ASPM
[ 0.244925] acpi PNP0A08:00: Unable to request _OSC control (_OSC
support mask: 0x08)
[ 0.245685] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 0.245801] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[ 0.245910] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[ 0.246017] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[ 0.246125] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
[ 0.246232] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[ 0.246339] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.246448] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
[ 0.246784] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.246796] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.246868] Found 1 acpi root devices
[ 0.248270] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.248270] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.248270] vgaarb: loaded
[ 0.248270] vgaarb: bridge control possible 0000:01:00.0
[ 0.248270] PCI: Using ACPI for IRQ routing
[ 0.259481] PCI: pci_cache_line_size set to 64 bytes
[ 0.259687] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.259691] e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
[ 0.259695] e820: reserve RAM buffer [mem 0xbf9bc000-0xbfffffff]
[ 0.259702] e820: reserve RAM buffer [mem 0xbfb08000-0xbfffffff]
[ 0.259706] e820: reserve RAM buffer [mem 0xbfd18000-0xbfffffff]
[ 0.259710] e820: reserve RAM buffer [mem 0xbfd64000-0xbfffffff]
[ 0.259714] e820: reserve RAM buffer [mem 0xbfde2000-0xbfffffff]
[ 0.259717] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[ 0.259948] HPET: 4 timers in total, 0 timers will be used for
per-cpu timer
[ 0.259956] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259964] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.261018] Switching to clocksource hpet
[ 0.263289] pnp: PnP ACPI init
[ 0.263312] ACPI: bus type PNP registered
[ 0.263530] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.263598] pnp 00:01: Plug and Play ACPI device, IDs SYN0302 SYN0300
SYN0002 PNP0f13 (active)
[ 0.263621] pnp 00:02: [dma 4]
[ 0.263668] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.263722] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.263915] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.263922] system 00:04: Plug and Play ACPI device, IDs PNP0103
PNP0c01 (active)
[ 0.263987] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.264115] system 00:06: [io 0x1200-0x120f] has been reserved
[ 0.264121] system 00:06: [io 0x0480-0x048f] has been reserved
[ 0.264127] system 00:06: [io 0xffff] has been reserved
[ 0.264132] system 00:06: [io 0xffff] has been reserved
[ 0.264138] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.264143] system 00:06: [io 0x1180-0x11ff] has been reserved
[ 0.264148] system 00:06: [io 0xfe00] has been reserved
[ 0.264154] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264217] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.264537] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.264543] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.264549] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.264554] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.264560] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.264565] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.264571] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264814] pnp: PnP ACPI: found 9 devices
[ 0.264817] ACPI: bus type PNP unregistered
[ 0.273414] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x001fffff pref] to [bus 02] add_size 200000
[ 0.273429] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to
[bus 03] add_size 1000
[ 0.273436] pci 0000:00:1c.1: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.273449] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to
[bus 04] add_size 1000
[ 0.273455] pci 0000:00:1c.2: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.273461] pci 0000:00:1c.2: bridge window [mem
0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.273501] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff
pref] get_res_add_size add_size 200000
[ 0.273507] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff
64bit pref] get_res_add_size add_size 200000
[ 0.273512] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff]
get_res_add_size add_size 200000
[ 0.273517] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff
64bit pref] get_res_add_size add_size 200000
[ 0.273523] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff]
get_res_add_size add_size 1000
[ 0.273528] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff]
get_res_add_size add_size 1000
[ 0.273538] pci 0000:00:1c.0: BAR 15: assigned [mem
0xc0000000-0xc02fffff pref]
[ 0.273546] pci 0000:00:1c.1: BAR 15: assigned [mem
0xc0300000-0xc04fffff 64bit pref]
[ 0.273554] pci 0000:00:1c.2: BAR 14: assigned [mem
0xc0500000-0xc06fffff]
[ 0.273562] pci 0000:00:1c.2: BAR 15: assigned [mem
0xc0700000-0xc08fffff 64bit pref]
[ 0.273569] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.273575] pci 0000:00:1c.2: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.273583] pci 0000:00:1f.3: BAR 0: assigned [mem
0xc0900000-0xc09000ff 64bit]
[ 0.273601] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 0.273606] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.273612] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.273619] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.273625] pci 0000:00:01.0: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.273635] pci 0000:02:00.0: BAR 6: assigned [mem
0xc0000000-0xc001ffff pref]
[ 0.273640] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.273645] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.273653] pci 0000:00:1c.0: bridge window [mem 0xf6100000-0xf61fffff]
[ 0.273661] pci 0000:00:1c.0: bridge window [mem
0xc0000000-0xc02fffff pref]
[ 0.273670] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.273676] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.273684] pci 0000:00:1c.1: bridge window [mem 0xf6200000-0xf62fffff]
[ 0.273692] pci 0000:00:1c.1: bridge window [mem
0xc0300000-0xc04fffff 64bit pref]
[ 0.273701] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.273707] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.273715] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc06fffff]
[ 0.273722] pci 0000:00:1c.2: bridge window [mem
0xc0700000-0xc08fffff 64bit pref]
[ 0.273732] pci 0000:00:1c.3: PCI bridge to [bus 05-07]
[ 0.273737] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.273746] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf60fffff]
[ 0.273753] pci 0000:00:1c.3: bridge window [mem
0xf0000000-0xf1ffffff 64bit pref]
[ 0.273762] pci 0000:00:1c.4: PCI bridge to [bus 08-0a]
[ 0.273768] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
[ 0.273776] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.273783] pci 0000:00:1c.4: bridge window [mem
0xf2000000-0xf3ffffff 64bit pref]
[ 0.273793] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[ 0.274487] pci 0000:00:1e.0: setting latency timer to 64
[ 0.274494] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.274499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.274503] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.274508] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.274512] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.274517] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.274521] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.274525] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.274530] pci_bus 0000:00: resource 12 [mem 0xc0000000-0xfebfffff]
[ 0.274534] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.274539] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[ 0.274544] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.274548] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.274553] pci_bus 0000:02: resource 1 [mem 0xf6100000-0xf61fffff]
[ 0.274557] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc02fffff pref]
[ 0.274562] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.274566] pci_bus 0000:03: resource 1 [mem 0xf6200000-0xf62fffff]
[ 0.274571] pci_bus 0000:03: resource 2 [mem 0xc0300000-0xc04fffff
64bit pref]
[ 0.274575] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.274580] pci_bus 0000:04: resource 1 [mem 0xc0500000-0xc06fffff]
[ 0.274584] pci_bus 0000:04: resource 2 [mem 0xc0700000-0xc08fffff
64bit pref]
[ 0.274589] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.274593] pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf60fffff]
[ 0.274598] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf1ffffff
64bit pref]
[ 0.274602] pci_bus 0000:08: resource 0 [io 0x5000-0x5fff]
[ 0.274607] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.274611] pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf3ffffff
64bit pref]
[ 0.274616] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 0.274620] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 0.274625] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.274629] pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.274633] pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.274638] pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.274642] pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.274647] pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.274651] pci_bus 0000:0d: resource 12 [mem 0xc0000000-0xfebfffff]
[ 0.274723] NET: Registered protocol family 2
[ 0.275092] TCP established hash table entries: 32768 (order: 7,
524288 bytes)
[ 0.275409] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.275649] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.275712] TCP: reno registered
[ 0.275729] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.275773] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.275913] NET: Registered protocol family 1
[ 0.277835] pci 0000:01:00.0: Boot video device
[ 0.277920] PCI: CLS 64 bytes, default 64
[ 0.277984] Unpacking initramfs...
[ 0.717004] Freeing initrd memory: 11652k freed
[ 0.725038] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.725048] software IO TLB [mem 0xbb8a1000-0xbf8a1000] (64MB) mapped
at [ffff8800bb8a1000-ffff8800bf8a0fff]
[ 0.725133] Simple Boot Flag at 0x57 set to 0x1
[ 0.725740] audit: initializing netlink socket (disabled)
[ 0.725766] type=2000 audit(1383649269.724:1): initialized
[ 0.750622] bounce pool size: 64 pages
[ 0.750632] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.751420] VFS: Disk quotas dquot_6.5.2
[ 0.751460] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.751631] msgmni has been set to 7922
[ 0.752017] alg: No test for stdrng (krng)
[ 0.752059] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 0.752111] io scheduler noop registered
[ 0.752114] io scheduler deadline registered
[ 0.752133] io scheduler cfq registered (default)
[ 0.752306] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.752426] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.752537] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.752642] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.752751] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.752855] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[ 0.752990] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.753021] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.753146] intel_idle: does not run on family 6 model 23
[ 0.753225] GHES: HEST is not enabled!
[ 0.753325] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.754252] Linux agpgart interface v0.103
[ 0.754575] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 0.774823] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.774833] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.775049] mousedev: PS/2 mouse device common for all mice
[ 0.775848] rtc_cmos 00:07: RTC can wake from S4
[ 0.776036] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.776069] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 0.776083] cpuidle: using governor ladder
[ 0.776086] cpuidle: using governor menu
[ 0.776252] TCP: cubic registered
[ 0.776297] NET: Registered protocol family 10
[ 0.776676] mip6: Mobile IPv6
[ 0.776682] NET: Registered protocol family 17
[ 0.777103] PM: Hibernation image not present or could not be loaded.
[ 0.777117] registered taskstats version 1
[ 0.778298] rtc_cmos 00:07: setting system clock to 2013-11-05
11:01:10 UTC (1383649270)
[ 0.780105] Freeing unused kernel memory: 920k freed
[ 0.780670] Write protecting the kernel read-only data: 6144k
[ 0.783064] Freeing unused kernel memory: 444k freed
[ 0.785745] Freeing unused kernel memory: 492k freed
[ 0.796829] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.806409] systemd-udevd[58]: starting version 204
[ 0.840448] ACPI: bus type USB registered
[ 0.840518] usbcore: registered new interface driver usbfs
[ 0.840543] usbcore: registered new interface driver hub
[ 0.852105] usbcore: registered new device driver usb
[ 0.852724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.853122] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.853337] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.853344] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.853356] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 0.853418] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
[ 0.853490] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.853495] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.853500] usb usb1: Product: UHCI Host Controller
[ 0.853504] usb usb1: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 0.853508] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.855757] ehci-pci: EHCI PCI platform driver
[ 0.856301] hub 1-0:1.0: USB hub found
[ 0.856311] hub 1-0:1.0: 2 ports detected
[ 0.856606] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.856613] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.856625] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 2
[ 0.856656] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
[ 0.856716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.856721] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.856725] usb usb2: Product: UHCI Host Controller
[ 0.856730] usb usb2: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 0.856734] usb usb2: SerialNumber: 0000:00:1a.1
[ 0.856901] hub 2-0:1.0: USB hub found
[ 0.856911] hub 2-0:1.0: 2 ports detected
[ 0.857181] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.857187] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.857198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 3
[ 0.857231] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001840
[ 0.857287] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.857292] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.857297] usb usb3: Product: UHCI Host Controller
[ 0.857301] usb usb3: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 0.857305] usb usb3: SerialNumber: 0000:00:1a.2
[ 0.857472] hub 3-0:1.0: USB hub found
[ 0.857480] hub 3-0:1.0: 2 ports detected
[ 0.857773] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 0.858146] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.858157] ehci-pci 0000:00:1a.7: new USB bus registered, assigned
bus number 4
[ 0.858178] ehci-pci 0000:00:1a.7: debug port 1
[ 0.862099] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.862109] ehci-pci 0000:00:1a.7: irq 20, io mem 0xf6504800
[ 0.872597] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.872635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.872640] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.872645] usb usb4: Product: EHCI Host Controller
[ 0.872649] usb usb4: Manufacturer: Linux 3.10-2-amd64 ehci_hcd
[ 0.872653] usb usb4: SerialNumber: 0000:00:1a.7
[ 0.872830] hub 4-0:1.0: USB hub found
[ 0.872839] hub 4-0:1.0: 6 ports detected
[ 0.896104] hub 1-0:1.0: USB hub found
[ 0.896115] hub 1-0:1.0: 2 ports detected
[ 0.907530] sky2: driver version 1.30
[ 0.911351] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2
[ 0.911669] sky2 0000:02:00.0: irq 46 for MSI/MSI-X
[ 0.912634] sky2 0000:02:00.0 eth0: addr 00:1d:72:3c:e4:99
[ 0.920102] hub 2-0:1.0: USB hub found
[ 0.920113] hub 2-0:1.0: 2 ports detected
[ 0.923407] SCSI subsystem initialized
[ 0.927853] ACPI: bus type ATA registered
[ 0.927939] libata version 3.00 loaded.
[ 0.939537] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.939542] ACPI: Thermal Zone [TZS0] (31 C)
[ 0.944096] hub 3-0:1.0: USB hub found
[ 0.944106] hub 3-0:1.0: 2 ports detected
[ 0.944372] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.944388] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.944400] ehci-pci 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 0.944419] ehci-pci 0000:00:1d.7: debug port 1
[ 0.948343] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.948587] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf6504c00
[ 0.957696] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.957701] ACPI: Thermal Zone [TZS1] (31 C)
[ 0.960038] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.960070] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.960075] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.960080] usb usb5: Product: EHCI Host Controller
[ 0.960084] usb usb5: Manufacturer: Linux 3.10-2-amd64 ehci_hcd
[ 0.960088] usb usb5: SerialNumber: 0000:00:1d.7
[ 0.960273] hub 5-0:1.0: USB hub found
[ 0.960282] hub 5-0:1.0: 6 ports detected
[ 0.960869] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.960876] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.960887] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 0.960921] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.960975] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.960980] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.960985] usb usb6: Product: UHCI Host Controller
[ 0.960989] usb usb6: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 0.960993] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.961475] hub 6-0:1.0: USB hub found
[ 0.961484] hub 6-0:1.0: 2 ports detected
[ 0.961742] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.961748] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.961758] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 0.961806] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
[ 0.961859] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.961865] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.961869] usb usb7: Product: UHCI Host Controller
[ 0.961873] usb usb7: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 0.961877] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.962054] hub 7-0:1.0: USB hub found
[ 0.962062] hub 7-0:1.0: 2 ports detected
[ 0.962320] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.962326] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.962336] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 0.962382] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.962434] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.962439] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.962443] usb usb8: Product: UHCI Host Controller
[ 0.962447] usb usb8: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 0.962451] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.962628] hub 8-0:1.0: USB hub found
[ 0.962636] hub 8-0:1.0: 2 ports detected
[ 0.963667] ahci 0000:00:1f.2: version 3.0
[ 0.963840] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 0.963910] ahci: SSS flag set, parallel bus scan disabled
[ 0.963952] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps
0x33 impl SATA mode
[ 0.963959] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo
pio slum part ccc ems sxs
[ 0.963966] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.990636] scsi0 : ahci
[ 0.996184] scsi1 : ahci
[ 0.999534] scsi2 : ahci
[ 0.999662] scsi3 : ahci
[ 0.999778] scsi4 : ahci
[ 0.999890] scsi5 : ahci
[ 0.999997] ata1: SATA max UDMA/133 abar m2048@0xf6504000 port
0xf6504100 irq 47
[ 1.000017] ata2: SATA max UDMA/133 abar m2048@0xf6504000 port
0xf6504180 irq 47
[ 1.000021] ata3: DUMMY
[ 1.000024] ata4: DUMMY
[ 1.000028] ata5: SATA max UDMA/133 abar m2048@0xf6504000 port
0xf6504300 irq 47
[ 1.000032] ata6: SATA max UDMA/133 abar m2048@0xf6504000 port
0xf6504380 irq 47
[ 1.184025] usb 4-3: new high-speed USB device number 2 using ehci-pci
[ 1.320028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.359921] ata1.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
[ 1.359926] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.362720] ata1.00: configured for UDMA/133
[ 1.362928] scsi 0:0:0:0: Direct-Access ATA ST9500420ASG
0002 PQ: 0 ANSI: 5
[ 1.391039] usb 4-3: New USB device found, idVendor=064e, idProduct=a117
[ 1.391044] usb 4-3: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 1.391049] usb 4-3: Product: Acer HD Crystal Eye webcam
[ 1.391053] usb 4-3: Manufacturer: SuYin
[ 1.391057] usb 4-3: SerialNumber: CN1014-S36B-OV01-VA-R03.00.00
[ 1.680027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.681851] ata2.00: ATAPI: Optiarc BD ROM BC-5500S, 1.B2, max UDMA/100
[ 1.683765] ata2.00: configured for UDMA/100
[ 1.684939] scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5500S
1.B2 PQ: 0 ANSI: 5
[ 1.724022] tsc: Refined TSC clocksource calibration: 2527.284 MHz
[ 1.724030] Switching to clocksource tsc
[ 2.004020] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.324019] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.330805] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 2.330926] sd 0:0:0:0: [sda] Write Protect is off
[ 2.330931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.330984] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.331478] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 2.331482] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.331776] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.334451] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.334598] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.385757] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 2.386625] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.184164] PM: Starting manual resume from disk
[ 3.184170] PM: Hibernation image partition 8:6 present
[ 3.184172] PM: Looking for hibernation image.
[ 3.184544] PM: Image not found (code -22)
[ 3.184547] PM: Hibernation image not present or could not be loaded.
[ 3.211496] kjournald starting. Commit interval 5 seconds
[ 3.211554] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 5.736870] systemd-udevd[332]: starting version 204
[ 7.669023] cfg80211: Calling CRDA to update world regulatory domain
[ 7.848170] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f
SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1
(20130328/utaddress-251)
[ 7.848181] ACPI: This conflict may cause random problems and system
instability
[ 7.848185] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 7.848232] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 7.881020] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 7.881024] Copyright(c) 2003-2013 Intel Corporation
[ 7.881304] iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X
[ 7.911949] acpi device:03: registered as cooling_device0
[ 7.912027] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.912115] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input1
[ 7.916944] ACPI Warning: 0x0000000000000428-0x000000000000042f
SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[ 7.916954] ACPI: This conflict may cause random problems and system
instability
[ 7.916957] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 7.916965] ACPI Warning: 0x00000000000011b0-0x00000000000011bf
SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 7.916972] ACPI: This conflict may cause random problems and system
instability
[ 7.916975] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 7.916978] ACPI Warning: 0x0000000000001180-0x00000000000011af
SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 7.916985] ACPI: This conflict may cause random problems and system
instability
[ 7.916988] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 7.961501] ACPI: AC Adapter [ADP1] (off-line)
[ 7.966960] ACPI: Requesting acpi_cpufreq
[ 7.968040] Monitor-Mwait will be used to enter C-1 state
[ 7.968056] Monitor-Mwait will be used to enter C-2 state
[ 7.968069] Monitor-Mwait will be used to enter C-3 state
[ 7.968079] tsc: Marking TSC unstable due to TSC halts in idle
[ 7.968097] ACPI: acpi_idle registered with cpuidle
[ 7.972129] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 7.972731] Switching to clocksource hpet
[ 7.974044] ACPI: Lid Switch [LID0]
[ 7.974139] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 7.974147] ACPI: Sleep Button [SLPB]
[ 7.974233] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.974238] ACPI: Power Button [PWRF]
[ 8.094750] wmi: Mapper loaded
[ 8.161009] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.164656] ACPI: Battery Slot [BAT0] (battery present)
[ 8.220405] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 8.383269] iTCO_vendor_support: vendor-support=0
[ 8.386604] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 8.386635] iTCO_wdt: Found a ICH9M TCO device (Version=2,
TCOBASE=0x0460)
[ 8.386729] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.504613] iwlwifi 0000:03:00.0: firmware: agent loaded
iwlwifi-5000-5.ucode into memory
[ 8.504753] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1
build 33692 op_mode iwldvm
[ 8.505819] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 8.510386] acer_wmi: Function bitmap for Communication Device: 0x3
[ 8.510792] acer_wmi: Brightness must be controlled by acpi video driver
[ 8.510994] input: Acer BMA150 accelerometer as
/devices/virtual/input/input6
[ 8.588253] platform microcode: firmware: agent aborted loading
intel-ucode/06-17-06 (not found?)
[ 8.588461] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 8.757520] platform microcode: firmware: agent aborted loading
intel-ucode/06-17-06 (not found?)
[ 8.757775] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.791569] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 8.791572] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 8.791574] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 8.791576] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 8.791579] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P enabled
[ 8.791581] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100
AGN, REV=0x54
[ 8.791634] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 8.794666] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
[ 8.798007] media: Linux media interface: v0.10
[ 8.873265] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.015829] Linux video capture interface: v2.00
[ 9.217233] uvcvideo: Found UVC 1.00 device Acer HD Crystal Eye
webcam (064e:a117)
[ 9.226145] input: Acer HD Crystal Eye webcam as
/devices/pci0000:00/0000:00:1a.7/usb4/4-3/4-3:1.0/input/input7
[ 9.226215] usbcore: registered new interface driver uvcvideo
[ 9.226217] USB Video Class driver (1.1.1)
[ 9.570172] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5,
id: 0x81a0b1, caps: 0xa04711/0xa04000/0x0, board id: 3655, fw id: 350306
[ 9.638337] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input8
[ 9.775679] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 9.855230] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input9
[ 9.904673] input: HDA Intel HDMI/DP,pcm=3 Phantom as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.904744] input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.904811] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.904874] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.280065] cfg80211: World regulatory domain updated:
[ 10.280069] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 10.280072] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 10.280074] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 10.280076] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300
mBi, 2000 mBm)
[ 10.280078] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 10.280080] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 10.649020] nvidia: module license 'NVIDIA' taints kernel.
[ 10.649024] Disabling lock debugging due to kernel taint
[ 10.666517] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 10.666624] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.60
Wed Sep 25 14:28:26 PDT 2013
[ 15.076248] Adding 4208992k swap on /dev/sda6. Priority:-1 extents:1
across:4208992k
[ 16.334571] EXT3-fs (sda5): using internal journal
[ 17.209184] fuse init (API version 7.22)
[ 17.245763] loop: module loaded
[ 19.138942] RPC: Registered named UNIX socket transport module.
[ 19.138950] RPC: Registered udp transport module.
[ 19.138955] RPC: Registered tcp transport module.
[ 19.138959] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.197277] FS-Cache: Loaded
[ 19.201321] Key type dns_resolver registered
[ 19.234474] FS-Cache: Netfs 'nfs' registered for caching
[ 19.305428] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 21.846750] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input14
[ 24.102781] Bluetooth: Core ver 2.16
[ 24.102798] NET: Registered protocol family 31
[ 24.102800] Bluetooth: HCI device and connection manager initialized
[ 24.102808] Bluetooth: HCI socket layer initialized
[ 24.102811] Bluetooth: L2CAP socket layer initialized
[ 24.102816] Bluetooth: SCO socket layer initialized
[ 24.127844] Bluetooth: RFCOMM TTY layer initialized
[ 24.127852] Bluetooth: RFCOMM socket layer initialized
[ 24.127853] Bluetooth: RFCOMM ver 1.11
[ 24.216142] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.216146] Bluetooth: BNEP filters: protocol multicast
[ 24.216155] Bluetooth: BNEP socket layer initialized
[ 24.683814] lp: driver loaded but no devices found
[ 24.700482] ppdev: user-space parallel port driver
[ 28.492926] sky2 0000:02:00.0 eth0: enabling interface
[ 28.493223] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.497218] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 28.500223] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 28.687465] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 28.690487] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 28.808911] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.576924] ACPI Warning: For \_SB_.PCI0.PEGP.VGA_.MXMI: Excess
arguments - needs 1, found 2 (20130328/nspredef-272)
[ 38.576938] ACPI Warning: For \_SB_.PCI0.PEGP.VGA_.MXMS: Excess
arguments - needs 1, found 2 (20130328/nspredef-272)
[ 228.142823] wlan0: authenticate with 00:19:e0:6e:7f:a0
[ 228.146760] wlan0: send auth to 00:19:e0:6e:7f:a0 (try 1/3)
[ 228.148688] wlan0: authenticated
[ 228.149218] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is
not supported by the AP
[ 228.149221] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is
not supported by the AP
[ 228.152038] wlan0: associate with 00:19:e0:6e:7f:a0 (try 1/3)
[ 228.154534] wlan0: RX AssocResp from 00:19:e0:6e:7f:a0 (capab=0x431
status=0 aid=10)
[ 228.157706] wlan0: associated
[ 228.157737] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Gianni
--
________________________________
Giovanni Bellonio
via Molinetto, 32/H
21014 Laveno Mombello (VA)
tel/fax +39 0332 626278
mobile +39 (0)368 7227193
Reply to: