Re: chiavetta USB e debian
In data giovedì 12 gennaio 2012 11:59:58, Antonio Mariano ha scritto:
> da root ho fatto
> #:udevadm monitor
>
> UDEV - the event which udev sends out after rule processing
> KERNEL - the kernel uevent
>
> KERNEL[1326365814.615793] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1 (usb) KERNEL[1326365814.616031]
> add /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0 (usb)
> KERNEL[1326365814.624815] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6 (scsi)
> KERNEL[1326365814.624849] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/scsi_host/host6
> (scsi_host) UDEV [1326365814.630963] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1 (usb) UDEV [1326365814.633720]
> add /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0 (usb) UDEV
> [1326365814.633751] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6 (scsi) UDEV
> [1326365814.634188] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/scsi_host/host6
> (scsi_host) KERNEL[1326365819.627073] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0
> (scsi) KERNEL[1326365819.627106] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0 (scsi) KERNEL[1326365819.627126] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0/scsi_disk/6:0:0:0 (scsi_disk) KERNEL[1326365819.627170] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0/scsi_device/6:0:0:0 (scsi_device) KERNEL[1326365819.627678] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0/scsi_generic/sg2 (scsi_generic) UDEV [1326365819.627701] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0
> (scsi) KERNEL[1326365819.627722] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0/bsg/6:0:0:0 (bsg) UDEV [1326365819.629697] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0 (scsi) UDEV [1326365819.631539] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0/scsi_device/6:0:0:0 (scsi_device) UDEV [1326365819.631953] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0/scsi_disk/6:0:0:0 (scsi_disk) KERNEL[1326365819.632537] change
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0:
> 0 (scsi) UDEV [1326365819.633351] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0/bsg/6:0:0:0 (bsg) UDEV [1326365819.638050] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0/scsi_generic/sg2 (scsi_generic) UDEV [1326365819.638435] change
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0:
> 0 (scsi) KERNEL[1326365819.681889] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0/block/sdb (block) KERNEL[1326365819.681924] add
> /devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host6/target6:0:0/6:0:0
> :0/block/sdb/sdb1 (block) KERNEL[1326365819.681944] add
> /devices/virtual/bdi/8:16 (bdi) UDEV [1326365819.684823] add
> /devices/virtual/bdi/8:16 (bdi)
>
>
>
> gollum1 mi sa' che hai ragione
>
>
non ho capito se sg è il device virtuale CDROM (potrebbe benissimo esserlo),
oppure sto prendendo io un abbaglio...
comunque, se mettendolo su un computer con winzoz, ti parte anche questa
"partizione" cdrom, con dentro il software, vi trovi dentro il programmino per
eliminare il tutto e farla tornare ad essere una semplicissima chiavetta
usb...
sempre ammesso che non sia una fake pendrive, di quelle che ti dichiarano che
sono 16GB, in realtà sono da molto meno... e quando vai ad usarle, ti danno
errori su errori fino a quando non le riformatti, a quel punto ti accorgi che
sono solo 4 o 8 GB...
(capitato ad un mio collega con chiavette acquistate in cina).
Byez
--
Gollum1
Tesssssoro, dov'é il mio tesssssoro...
Reply to: