Problema Kernel 2.6.23.1 e MTP device
ho ricompilato l'ultimo kernel stabile (2.6.23.1) a mano; non ho
problemi tranne per il fatto che non mi vede più DA UTENTE il mio
creative v plus (lettore mp3) che è un device mtp; le porte usb
funzionano, visto che il mio hd portatile va bene, ma il lettore non ne
vuole sapere di andare. con il kernel debian (l'ultima versione in
unstable) tutto va.
inoltre ho provato ad usare (per quanto riguarda la parte dei driver
per i controller usb, per il resto ho cambiato a mio piacimento)
direttamente il config del kernel funzionante nel kernel nuovo, ma
comunque ho lo stesso problema.
mtp-detect mi restituisce:
libmtp version: 0.2.2
Attempting to connect device(s)
Detect: No Devices have been found
e amarok, di conseguenza, non vede nulla.
da root invece tutto ok, quindi immagino sia un problema di permessi;
nel file /etc/udev/libmtp6.rules ho:
# Creative ZEN V Plus
ATTR{idVendor}=="041e", ATTR{idProduct}=="4152", SYMLINK+="libmtp-%k",
MODE="660", GROUP="audio"
in dmesg ho questo:
usb 5-8:1.0: uevent
usb 5-8:1.0: uevent
usb 5-8: uevent
hub 5-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x100
hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0100
ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
hub 5-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
hub 5-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 8 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER sig=se0 PE CONNECT
usb 5-8: new high speed USB device using ehci_hcd and address 7
ehci_hcd 0000:00:1d.7: port 8 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER sig=se0 PE CONNECT
usb 5-8: default language 0x0409
usb 5-8: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-8: Product: Creative ZEN V Plus
usb 5-8: Manufacturer: Creative Technology Ltd
usb 5-8: SerialNumber: C6C847050002FA9D
usb 5-8: uevent
usb 5-8: usb_probe_device
usb 5-8: configuration #1 chosen from 1 choice
usb 5-8: adding 5-8:1.0 (config #1, interface 0)
usb 5-8:1.0: uevent
usb 5-8:1.0: uevent
drivers/usb/core/inode.c: creating file '007'
ma anche questo riguardo le porte usb:
Nov 14 14:40:35 pozzaibe kernel: usb_id[1176]: segfault at 00000000 eip 45d995d8 esp bf9d9400 error 4
Nov 14 14:40:35 pozzaibe kernel: usb_id[1187]: segfault at 00000000 eip 45d995d8 esp bffb41e0 error 4
Nov 14 14:40:35 pozzaibe kernel: usb_id[1188]: segfault at 00000000 eip 45d995d8 esp bfd44770 error 4
il seguente è il mio /var/log/messages, dite che c'è qualcosa che non
va?
Nov 14 14:40:35 pozzaibe kernel: Linux version 2.6.23.1gg (root@pozzaibe) (gcc version 4.2.3 20071014 (prerelease) (Debian 4.2.2-3)) #1 PREEMPT Wed Nov 14 12:46:22 CET 2007
Nov 14 14:40:35 pozzaibe kernel: BIOS-provided physical RAM map:
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
Nov 14 14:40:35 pozzaibe kernel: Warning only 896MB will be used.
Nov 14 14:40:35 pozzaibe kernel: Use a HIGHMEM enabled kernel.
Nov 14 14:40:35 pozzaibe kernel: 896MB LOWMEM available.
Nov 14 14:40:35 pozzaibe kernel: Zone PFN ranges:
Nov 14 14:40:35 pozzaibe kernel: DMA 0 -> 4096
Nov 14 14:40:35 pozzaibe kernel: Normal 4096 -> 229376
Nov 14 14:40:35 pozzaibe kernel: Movable zone start PFN for each node
Nov 14 14:40:35 pozzaibe kernel: early_node_map[1] active PFN ranges
Nov 14 14:40:35 pozzaibe kernel: 0: 0 -> 229376
Nov 14 14:40:35 pozzaibe kernel: DMI 2.3 present.
Nov 14 14:40:35 pozzaibe kernel: ACPI: RSDP 000FA550, 0014 (r0 ACPIAM)
Nov 14 14:40:35 pozzaibe kernel: ACPI: RSDT 3FF40000, 0030 (r1 A M I OEMRSDT 9000608 MSFT 97)
Nov 14 14:40:35 pozzaibe kernel: ACPI: FACP 3FF40200, 0081 (r2 A M I OEMFACP 9000608 MSFT 97)
Nov 14 14:40:35 pozzaibe kernel: ACPI: DSDT 3FF40370, 3B3B (r1 P4i6G P4i6G122 122 INTL 2002026)
Nov 14 14:40:35 pozzaibe kernel: ACPI: FACS 3FF50000, 0040
Nov 14 14:40:35 pozzaibe kernel: ACPI: APIC 3FF40300, 006C (r1 A M I OEMAPIC 9000608 MSFT 97)
Nov 14 14:40:35 pozzaibe kernel: ACPI: OEMB 3FF50040, 003F (r1 A M I OEMBIOS 9000608 MSFT 97)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PM-Timer IO Port: 0x808
Nov 14 14:40:35 pozzaibe kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 14 14:40:35 pozzaibe kernel: Processor #0 15:2 APIC version 20
Nov 14 14:40:35 pozzaibe kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
Nov 14 14:40:35 pozzaibe kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Nov 14 14:40:35 pozzaibe kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Nov 14 14:40:35 pozzaibe kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Nov 14 14:40:35 pozzaibe kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Nov 14 14:40:35 pozzaibe kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 14 14:40:35 pozzaibe kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 14 14:40:35 pozzaibe kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 14 14:40:35 pozzaibe kernel: Using ACPI (MADT) for SMP configuration information
Nov 14 14:40:35 pozzaibe kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
Nov 14 14:40:35 pozzaibe kernel: Built 1 zonelists in Zone order. Total pages: 227584
Nov 14 14:40:35 pozzaibe kernel: Kernel command line: root=/dev/hdb1 ro
Nov 14 14:40:35 pozzaibe kernel: Enabling fast FPU save and restore... done.
Nov 14 14:40:35 pozzaibe kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 14 14:40:35 pozzaibe kernel: Initializing CPU#0
Nov 14 14:40:35 pozzaibe kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Nov 14 14:40:35 pozzaibe kernel: Detected 2663.243 MHz processor.
Nov 14 14:40:35 pozzaibe kernel: Console: colour VGA+ 80x25
Nov 14 14:40:35 pozzaibe kernel: console [tty0] enabled
Nov 14 14:40:35 pozzaibe kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 14 14:40:35 pozzaibe kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 14 14:40:35 pozzaibe kernel: Memory: 905292k/917504k available (1656k kernel code, 11728k reserved, 617k data, 180k init, 0k highmem)
Nov 14 14:40:35 pozzaibe kernel: virtual kernel memory layout:
Nov 14 14:40:35 pozzaibe kernel: fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
Nov 14 14:40:35 pozzaibe kernel: vmalloc : 0xf8800000 - 0xfffb3000 ( 119 MB)
Nov 14 14:40:35 pozzaibe kernel: lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Nov 14 14:40:35 pozzaibe kernel: .init : 0xc033c000 - 0xc0369000 ( 180 kB)
Nov 14 14:40:35 pozzaibe kernel: .data : 0xc029e2c0 - 0xc03388d4 ( 617 kB)
Nov 14 14:40:35 pozzaibe kernel: .text : 0xc0100000 - 0xc029e2c0 (1656 kB)
Nov 14 14:40:35 pozzaibe kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 14 14:40:35 pozzaibe kernel: SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Nov 14 14:40:35 pozzaibe kernel: Calibrating delay using timer specific routine.. 5328.53 BogoMIPS (lpj=2664266)
Nov 14 14:40:35 pozzaibe kernel: Mount-cache hash table entries: 512
Nov 14 14:40:35 pozzaibe kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Nov 14 14:40:35 pozzaibe kernel: CPU: L2 cache: 512K
Nov 14 14:40:35 pozzaibe kernel: Intel machine check architecture supported.
Nov 14 14:40:35 pozzaibe kernel: Intel machine check reporting enabled on CPU#0.
Nov 14 14:40:35 pozzaibe kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Nov 14 14:40:35 pozzaibe kernel: CPU0: Thermal monitoring enabled
Nov 14 14:40:35 pozzaibe kernel: Compat vDSO mapped to ffffe000.
Nov 14 14:40:35 pozzaibe kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
Nov 14 14:40:35 pozzaibe kernel: Checking 'hlt' instruction... OK.
Nov 14 14:40:35 pozzaibe kernel: ACPI: Core revision 20070126
Nov 14 14:40:35 pozzaibe kernel: ENABLING IO-APIC IRQs
Nov 14 14:40:35 pozzaibe kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 14 14:40:35 pozzaibe kernel: NET: Registered protocol family 16
Nov 14 14:40:35 pozzaibe kernel: ACPI: bus type pci registered
Nov 14 14:40:35 pozzaibe kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
Nov 14 14:40:35 pozzaibe kernel: PCI: Using configuration type 1
Nov 14 14:40:35 pozzaibe kernel: Setting up standard PCI resources
Nov 14 14:40:35 pozzaibe kernel: ACPI: Interpreter enabled
Nov 14 14:40:35 pozzaibe kernel: ACPI: (supports S0 S5)
Nov 14 14:40:35 pozzaibe kernel: ACPI: Using IOAPIC for interrupt routing
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 14 14:40:35 pozzaibe kernel: PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
Nov 14 14:40:35 pozzaibe kernel: PCI quirk: region 0480-04bf claimed by ICH4 GPIO
Nov 14 14:40:35 pozzaibe kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 19, should be 0C [20070126]
Nov 14 14:40:35 pozzaibe kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 14 14:40:35 pozzaibe kernel: pnp: PnP ACPI init
Nov 14 14:40:35 pozzaibe kernel: ACPI: bus type pnp registered
Nov 14 14:40:35 pozzaibe kernel: pnp: PnP ACPI: found 13 devices
Nov 14 14:40:35 pozzaibe kernel: ACPI: ACPI bus type pnp unregistered
Nov 14 14:40:35 pozzaibe kernel: PnPBIOS: Disabled by ACPI PNP
Nov 14 14:40:35 pozzaibe kernel: PCI: Using ACPI for IRQ routing
Nov 14 14:40:35 pozzaibe kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Nov 14 14:40:35 pozzaibe kernel: ACPI: RTC can wake from S4
Nov 14 14:40:35 pozzaibe kernel: Time: tsc clocksource has been installed.
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:07: iomem range 0xff380000-0xffefffff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0b: ioport range 0x295-0x296 has been reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0c: iomem range 0xc0000-0xdffff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: PCI: Bridge: 0000:00:01.0
Nov 14 14:40:35 pozzaibe kernel: IO window: disabled.
Nov 14 14:40:35 pozzaibe kernel: MEM window: f3d00000-f7dfffff
Nov 14 14:40:35 pozzaibe kernel: PREFETCH window: d3c00000-f3bfffff
Nov 14 14:40:35 pozzaibe kernel: PCI: Bridge: 0000:00:1e.0
Nov 14 14:40:35 pozzaibe kernel: IO window: b000-bfff
Nov 14 14:40:35 pozzaibe kernel: MEM window: f7e00000-f7efffff
Nov 14 14:40:35 pozzaibe kernel: PREFETCH window: disabled.
Nov 14 14:40:35 pozzaibe kernel: NET: Registered protocol family 2
Nov 14 14:40:35 pozzaibe kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 14 14:40:35 pozzaibe kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 14 14:40:35 pozzaibe kernel: TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Nov 14 14:40:35 pozzaibe kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 14 14:40:35 pozzaibe kernel: TCP reno registered
Nov 14 14:40:35 pozzaibe kernel: audit: initializing netlink socket (disabled)
Nov 14 14:40:35 pozzaibe kernel: audit(1195047621.173:1): initialized
Nov 14 14:40:35 pozzaibe kernel: io scheduler noop registered
Nov 14 14:40:35 pozzaibe kernel: io scheduler anticipatory registered
Nov 14 14:40:35 pozzaibe kernel: io scheduler deadline registered
Nov 14 14:40:35 pozzaibe kernel: io scheduler cfq registered (default)
Nov 14 14:40:35 pozzaibe kernel: isapnp: Scanning for PnP cards...
Nov 14 14:40:35 pozzaibe kernel: isapnp: No Plug & Play device found
Nov 14 14:40:35 pozzaibe kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 14 14:40:35 pozzaibe kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 14 14:40:35 pozzaibe kernel: 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 14 14:40:35 pozzaibe kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 14 14:40:35 pozzaibe kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 14 14:40:35 pozzaibe kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
Nov 14 14:40:35 pozzaibe kernel: ICH5: chipset revision 2
Nov 14 14:40:35 pozzaibe kernel: ICH5: not 100% native mode: will probe irqs later
Nov 14 14:40:35 pozzaibe kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA
Nov 14 14:40:35 pozzaibe kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Nov 14 14:40:35 pozzaibe kernel: Switched to high resolution mode on CPU 0
Nov 14 14:40:35 pozzaibe kernel: hdb: MAXTOR STM3802110A, ATA DISK drive
Nov 14 14:40:35 pozzaibe kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 14 14:40:35 pozzaibe kernel: hdc: PHILIPS DVDR1640P, ATAPI CD/DVD-ROM drive
Nov 14 14:40:35 pozzaibe kernel: hdd: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
Nov 14 14:40:35 pozzaibe kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 14 14:40:35 pozzaibe kernel: hdb: max request size: 512KiB
Nov 14 14:40:35 pozzaibe kernel: hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
Nov 14 14:40:35 pozzaibe kernel: hdb: cache flushes supported
Nov 14 14:40:35 pozzaibe kernel: hdb: hdb1 hdb2 hdb3
Nov 14 14:40:35 pozzaibe kernel: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
Nov 14 14:40:35 pozzaibe kernel: PNP: PS/2 controller doesn't have KBD irq; using default 1
Nov 14 14:40:35 pozzaibe kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 14 14:40:35 pozzaibe kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 14 14:40:35 pozzaibe kernel: mice: PS/2 mouse device common for all mice
Nov 14 14:40:35 pozzaibe kernel: TCP cubic registered
Nov 14 14:40:35 pozzaibe kernel: NET: Registered protocol family 1
Nov 14 14:40:35 pozzaibe kernel: NET: Registered protocol family 17
Nov 14 14:40:35 pozzaibe kernel: Using IPI Shortcut mode
Nov 14 14:40:35 pozzaibe kernel: kjournald starting. Commit interval 5 seconds
Nov 14 14:40:35 pozzaibe kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 14 14:40:35 pozzaibe kernel: VFS: Mounted root (ext3 filesystem) readonly.
Nov 14 14:40:35 pozzaibe kernel: Freeing unused kernel memory: 180k freed
Nov 14 14:40:35 pozzaibe kernel: Real Time Clock Driver v1.12ac
Nov 14 14:40:35 pozzaibe kernel: Floppy drive(s): fd0 is 1.44M
Nov 14 14:40:35 pozzaibe kernel: FDC 0 is a post-1991 82077
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver usbfs
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver hub
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new device driver usb
Nov 14 14:40:35 pozzaibe kernel: input: Power Button (FF) as /devices/virtual/input/input0
Nov 14 14:40:35 pozzaibe kernel: ACPI: Power Button (FF) [PWRF]
Nov 14 14:40:35 pozzaibe kernel: input: Power Button (CM) as /devices/virtual/input/input1
Nov 14 14:40:35 pozzaibe kernel: ACPI: Power Button (CM) [PWRB]
Nov 14 14:40:35 pozzaibe kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Nov 14 14:40:35 pozzaibe kernel: hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Nov 14 14:40:35 pozzaibe kernel: Uniform CD-ROM driver Revision: 3.20
Nov 14 14:40:35 pozzaibe kernel: hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
Nov 14 14:40:35 pozzaibe kernel: 8139too Fast Ethernet driver 0.9.28
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 17
Nov 14 14:40:35 pozzaibe kernel: eth0: RealTek RTL8139 at 0xf8854800, 00:13:8f:f7:a3:d6, IRQ 17
Nov 14 14:40:35 pozzaibe kernel: input: PC Speaker as /devices/platform/pcspkr/input/input2
Nov 14 14:40:35 pozzaibe kernel: Linux agpgart interface v0.102
Nov 14 14:40:35 pozzaibe kernel: parport_pc 00:06: reported by Plug and Play ACPI
Nov 14 14:40:35 pozzaibe kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Nov 14 14:40:35 pozzaibe kernel: USB Universal Host Controller Interface driver v3.0
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.0: detected 2 ports
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e000
Nov 14 14:40:35 pozzaibe kernel: usb usb1: Product: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: usb usb1: Manufacturer: Linux 2.6.23.1gg uhci_hcd
Nov 14 14:40:35 pozzaibe kernel: usb usb1: SerialNumber: 0000:00:1d.0
Nov 14 14:40:35 pozzaibe kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: hub 1-0:1.0: USB hub found
Nov 14 14:40:35 pozzaibe kernel: hub 1-0:1.0: 2 ports detected
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.1: detected 2 ports
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
Nov 14 14:40:35 pozzaibe kernel: usb usb2: Product: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: usb usb2: Manufacturer: Linux 2.6.23.1gg uhci_hcd
Nov 14 14:40:35 pozzaibe kernel: usb usb2: SerialNumber: 0000:00:1d.1
Nov 14 14:40:35 pozzaibe kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: hub 2-0:1.0: USB hub found
Nov 14 14:40:35 pozzaibe kernel: hub 2-0:1.0: 2 ports detected
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.2: detected 2 ports
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000e800
Nov 14 14:40:35 pozzaibe kernel: usb usb3: Product: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: usb usb3: Manufacturer: Linux 2.6.23.1gg uhci_hcd
Nov 14 14:40:35 pozzaibe kernel: usb usb3: SerialNumber: 0000:00:1d.2
Nov 14 14:40:35 pozzaibe kernel: usb usb3: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: hub 3-0:1.0: USB hub found
Nov 14 14:40:35 pozzaibe kernel: hub 3-0:1.0: 2 ports detected
Nov 14 14:40:35 pozzaibe kernel: udev: renamed network interface eth0 to eth1
Nov 14 14:40:35 pozzaibe kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Nov 14 14:40:35 pozzaibe kernel: iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
Nov 14 14:40:35 pozzaibe kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 18
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: detected 2 ports
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000ec00
Nov 14 14:40:35 pozzaibe kernel: usb usb4: Product: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: usb usb4: Manufacturer: Linux 2.6.23.1gg uhci_hcd
Nov 14 14:40:35 pozzaibe kernel: usb usb4: SerialNumber: 0000:00:1d.3
Nov 14 14:40:35 pozzaibe kernel: usb usb4: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: hub 4-0:1.0: USB hub found
Nov 14 14:40:35 pozzaibe kernel: hub 4-0:1.0: 2 ports detected
Nov 14 14:40:35 pozzaibe kernel: usb 1-2: new low speed USB device using uhci_hcd and address 2
Nov 14 14:40:35 pozzaibe kernel: agpgart: Detected an Intel 865 Chipset.
Nov 14 14:40:35 pozzaibe kernel: agpgart: AGP aperture is 64M @ 0xf8000000
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf7fffc00
Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 14 14:40:35 pozzaibe kernel: usb usb5: Product: EHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: usb usb5: Manufacturer: Linux 2.6.23.1gg ehci_hcd
Nov 14 14:40:35 pozzaibe kernel: usb usb5: SerialNumber: 0000:00:1d.7
Nov 14 14:40:35 pozzaibe kernel: usb usb5: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: hub 5-0:1.0: USB hub found
Nov 14 14:40:35 pozzaibe kernel: hub 5-0:1.0: 8 ports detected
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 17
Nov 14 14:40:35 pozzaibe kernel: firewire_ohci: Added fw-ohci device 0000:02:01.0, OHCI version 1.0
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 21
Nov 14 14:40:35 pozzaibe kernel: gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xbc00, speed 1125kHz
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 23 (level, low) -> IRQ 20
Nov 14 14:40:35 pozzaibe kernel: Installing spdif_bug patch: Audigy 1 ES [SB0160]
Nov 14 14:40:35 pozzaibe kernel: firewire_core: created new fw device fw0 (0 config rom retries, S400)
Nov 14 14:40:35 pozzaibe kernel: input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
Nov 14 14:40:35 pozzaibe kernel: usb 5-4: new high speed USB device using ehci_hcd and address 3
Nov 14 14:40:35 pozzaibe kernel: usb 5-4: Product: Maxtor 3200
Nov 14 14:40:35 pozzaibe kernel: usb 5-4: Manufacturer: Maxtor Corporation
Nov 14 14:40:35 pozzaibe kernel: usb 5-4: SerialNumber: 2CAHVDQE
Nov 14 14:40:35 pozzaibe kernel: usb 5-4: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: SCSI subsystem initialized
Nov 14 14:40:35 pozzaibe kernel: Initializing USB Mass Storage driver...
Nov 14 14:40:35 pozzaibe kernel: usb 5-8: new high speed USB device using ehci_hcd and address 5
Nov 14 14:40:35 pozzaibe kernel: usb 5-8: Product: Creative ZEN V Plus
Nov 14 14:40:35 pozzaibe kernel: usb 5-8: Manufacturer: Creative Technology Ltd
Nov 14 14:40:35 pozzaibe kernel: usb 5-8: SerialNumber: C6C847050002FA9D
Nov 14 14:40:35 pozzaibe kernel: usb 5-8: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver usb-storage
Nov 14 14:40:35 pozzaibe kernel: USB Mass Storage support registered.
Nov 14 14:40:35 pozzaibe kernel: usb 1-2: new low speed USB device using uhci_hcd and address 4
Nov 14 14:40:35 pozzaibe kernel: usb 1-2: Product: USB-compliant keyboard
Nov 14 14:40:35 pozzaibe kernel: usb 1-2: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: Adding 522104k swap on /dev/hdb2. Priority:-1 extents:1 across:522104k
Nov 14 14:40:35 pozzaibe kernel: usb 4-1: new full speed USB device using uhci_hcd and address 2
Nov 14 14:40:35 pozzaibe kernel: usb 4-1: Product: Deskjet 5900 series
Nov 14 14:40:35 pozzaibe kernel: usb 4-1: Manufacturer: HP
Nov 14 14:40:35 pozzaibe kernel: usb 4-1: SerialNumber: CN5771Z0HB047H
Nov 14 14:40:35 pozzaibe kernel: usb 4-1: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver hiddev
Nov 14 14:40:35 pozzaibe kernel: input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input4
Nov 14 14:40:35 pozzaibe kernel: input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1d.0-2
Nov 14 14:40:35 pozzaibe kernel: input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input5
Nov 14 14:40:35 pozzaibe kernel: input,hiddev96: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1d.0-2
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver usbhid
Nov 14 14:40:35 pozzaibe kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Nov 14 14:40:35 pozzaibe kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver usblp
Nov 14 14:40:35 pozzaibe kernel: usb_id[1176]: segfault at 00000000 eip 45d995d8 esp bf9d9400 error 4
Nov 14 14:40:35 pozzaibe kernel: usb_id[1187]: segfault at 00000000 eip 45d995d8 esp bffb41e0 error 4
Nov 14 14:40:35 pozzaibe kernel: usb_id[1188]: segfault at 00000000 eip 45d995d8 esp bfd44770 error 4
Nov 14 14:40:35 pozzaibe kernel: EXT3 FS on hdb1, internal journal
Nov 14 14:40:35 pozzaibe kernel: loop: module loaded
Nov 14 14:40:35 pozzaibe kernel: w83627hf: Found W83627HF chip at 0x290
Nov 14 14:40:35 pozzaibe kernel: fuse init (API version 7.8)
Nov 14 14:40:35 pozzaibe kernel: kjournald starting. Commit interval 5 seconds
Nov 14 14:40:35 pozzaibe kernel: EXT3 FS on hdb3, internal journal
Nov 14 14:40:35 pozzaibe kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 14 14:40:35 pozzaibe kernel: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
Nov 14 14:40:35 pozzaibe kernel: scsi 0:0:0:0: Direct-Access Maxtor 3200 0344 PQ: 0 ANSI: 4
Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 14 14:40:35 pozzaibe kernel: sda: sda1
Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 14 14:40:42 pozzaibe kernel: lp0: using parport0 (interrupt-driven).
Nov 14 14:40:42 pozzaibe kernel: ppdev: user-space parallel port driver
Nov 14 14:40:45 pozzaibe pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
Nov 14 14:40:51 pozzaibe kernel: nvidia: module license 'NVIDIA' taints kernel.
Nov 14 14:40:51 pozzaibe kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
Nov 14 14:40:51 pozzaibe kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
Nov 14 14:40:53 pozzaibe kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Nov 14 14:40:53 pozzaibe kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Nov 14 14:40:53 pozzaibe kernel: agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Nov 14 14:41:53 pozzaibe kernel: kjournald starting. Commit interval 5 seconds
Nov 14 14:41:53 pozzaibe kernel: EXT3 FS on sda1, internal journal
Nov 14 14:41:53 pozzaibe kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 14 14:41:54 pozzaibe kernel: NET: Registered protocol family 10
Nov 14 14:41:54 pozzaibe kernel: lo: Disabled Privacy Extensions
sapete se con l'ultimo kernel abbiano cambiato qualcosa?
devo mettere mano a qualche file in /dev?
quale?
devo configurare qualcosa nel kernel?
grazie in anticipo
Luigi
--
~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
Io sono
lo sbaglio, il momento di confusione, l'inopportuno
Non sono niente.
Non sarò mai niente.
Non posso volere d'essere niente.
A parte questo, ho in me tutti i sogni del mondo.
F. Pessoa
~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
Reply to: