Re: eth0: error fetching interface information: Device not found
> Ciao a tutti :-)
>
> ho messo in uno slot pci una scheda ethernet Intel
>
> lspci -v
>
> 0000:00:0b.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro
> 100] (rev 04)
> Subsystem: Intel Corporation EtherExpress PRO/100+
> Flags: bus master, medium devsel, latency 64, IRQ 177
> Memory at dd9ff000 (32-bit, prefetchable) [size=4K]
> I/O ports at ee00 [size=32]
> Memory at dfe00000 (32-bit, non-prefetchable) [size=1M]
> Expansion ROM at dfd00000 [disabled] [size=1M]
> Capabilities: [dc] Power Management version 1
>
> dmesg:
> e100: eth0: e100_probe: addr 0xdd9ff000, irq 177, MAC addr
> 00:A0:C9:A2:4F:55 eth0: VIA Rhine II at 0x1e400, 00:0e:a6:c7:97:16, IRQ
> 201.
> eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Non so come, ma l'interfaccia che in dmesg viene riconosciuta come eth0
equivale a eth3.
se la configuro con ifconfig eth3 [parametri] pinga
qualcuno mi spiega come mai?
Grazie!
Pol
Reply to: