Problema stampante
Ciao ragazzi,
ho un problemino con la mia stampante. Ho scritto più volte sul forum di
linuxprinting.org (potete controllare, il forum è hp), ma non mi hanno
mai risposto... Chiaramente ho anche googlato un po', ma anche qui
nisba: mi siete rimasti solo voi!
Allora, ho una HP DeskJet 5652 (ovvero serie 5600) che fino a poco tempo
fa mi funzionava benissimo, ma da quache tempo non stampa più niente.
Evidentemente devo aver installato/disinstallato qualche pacchetto, ma
mi sa che la causa più probabile del non funzionamento deve essere stata
l'upgrade di CUPS.
Ecco un po' di dettagli. La stampante mi viene correttamente
riconosciuta, facendo un cat di /proc/bus/usb/devices è infatti presente
la seguente sezione:
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=6104 Rev= 1.00
S: Manufacturer=hp
S: Product=deskjet 5600
S: SerialNumber=MY41T4M16Q89
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
Ma configurando la stampante (tramite browser accedendo a
http://localhost:631/printers oppure che l'utility Gestione stampanti di
KDE) non viene stampato niente! Ho allora scaricato il software hplip,
come consigliato su linuxprinting.org. Questo software installa un
backend per le stampanti hp: il device della stampante sarà (nel mio caso)
hp:/usb/hp_deskjet_5600?serial=MY41T4M16Q89
Il software hplip è inoltre dotato di alcune utility. Una di queste è
hp-info, la quale visualizza:
$ hp-info
HP Linux Imaging and Printing System (ver. 0.9.7)
Device Information Utility ver. 3.2
Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Using device: hp:/usb/hp_deskjet_5600?serial=MY41T4M16Q89
Device Parameters:
Parameter Value(s)
----------------------------
----------------------------------------------------------
Model Parameters:
Parameter Value(s)
----------------------------
----------------------------------------------------------
model hp_deskjet_5600
model-ui HP Deskjet 5600
Status History:
Date/Time Status Description (code)
----------------------------
----------------------------------------------------------
29/01/2006 17:07:31 Unsupported printer model. (1900)
Da notare che mi dice "Unsupported printer model" quando invece la
stampante è supportata. Inoltre se tento di configurare la stampante dal
browser o da KDE non mi viene rivelato nessun device hp!
In poche parole: penso di aver configurato tutto correttamente, ma la
stampante non mi viene vista con tale configurazione (che è quella
corretta) e quindi non posso stampare niente!
Per ultimo vi inserisco i log:
# tail -f /var/log/cups/error_log
d [29/Jan/2006:17:23:02 +0100] FindBest: Location
CUPS_INTERNAL_BROWSE_ACL Limit 0
d [29/Jan/2006:17:23:02 +0100] FindBest: best = "/"
d [29/Jan/2006:17:23:02 +0100] IsAuthorized: auth = 0, satisfy=0...
d [29/Jan/2006:17:23:02 +0100] get_file: 5
filename=/usr/share/cups/doc/favicon.ico size=-1
D [29/Jan/2006:17:23:02 +0100] SendError: 5 code=404 (Not Found)
D [29/Jan/2006:17:23:02 +0100] CloseClient: 5
d [29/Jan/2006:17:23:02 +0100] CloseClient: Removing fd 5 from InputSet
and OutputSet...
d [29/Jan/2006:17:23:03 +0100] select_timeout: 12 seconds to send browse
update
d [29/Jan/2006:17:23:15 +0100] select_timeout: 71 seconds to send browse
update
d [29/Jan/2006:17:24:26 +0100] select_timeout: 71 seconds to send browse
update
d [29/Jan/2006:17:25:11 +0100] AcceptClient(lis=0x8088c40) 0 NumClients = 0
D [29/Jan/2006:17:25:11 +0100] AcceptClient: 5 from localhost:631.
d [29/Jan/2006:17:25:11 +0100] AcceptClient: Adding fd 5 to InputSet...
d [29/Jan/2006:17:25:11 +0100] ReadClient: 5, used=0, file=-1
D [29/Jan/2006:17:25:11 +0100] ReadClient: 5 POST / HTTP/1.1
d [29/Jan/2006:17:25:11 +0100] decode_auth(0xb7b12008): Authorization
string = ""
d [29/Jan/2006:17:25:11 +0100] decode_auth: 5 username=""
d [29/Jan/2006:17:25:11 +0100] IsAuthorized: con->uri = "/"
d [29/Jan/2006:17:25:11 +0100] FindBest: uri = "/"...
d [29/Jan/2006:17:25:11 +0100] FindBest: Location / Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /classes Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /classes/name Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /jobs Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /printers Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /printers/name Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /admin Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location
CUPS_INTERNAL_BROWSE_ACL Limit 0
d [29/Jan/2006:17:25:11 +0100] FindBest: best = "/"
d [29/Jan/2006:17:25:11 +0100] IsAuthorized: auth = 0, satisfy=0...
d [29/Jan/2006:17:25:11 +0100] POST /
d [29/Jan/2006:17:25:11 +0100] CONTENT_TYPE = application/ipp
d [29/Jan/2006:17:25:11 +0100] ReadClient: 5 con->data_encoding =
length, con->data_remaining = 238, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ProcessIPPRequest(0xb7b12008[5]):
operation_id = 4002
d [29/Jan/2006:17:25:11 +0100] get_printers(0xb7b12008[5], 0)
d [29/Jan/2006:17:25:11 +0100] add_printer_state_reasons(0xb7b12008[5],
0x8095f38[hp_deskjet_5652])
d [29/Jan/2006:17:25:11 +0100] add_queued_job_count(0xb7b12008[5],
0x8095f38[hp_deskjet_5652])
d [29/Jan/2006:17:25:11 +0100] copy_attrs(0x836d428, 0x8093768,
0x836cf50, 0)
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d428,
0x8093790[printer-uri-supported,4,45])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d428,
0x80938d0[printer-name,4,42])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d428,
0x8093928[printer-location,4,41])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d428,
0x8093978[printer-info,4,41])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d428,
0x8093bc8[device-uri,4,45])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d428,
0x8093c68[printer-make-and-model,4,41])
d [29/Jan/2006:17:25:11 +0100] copy_attrs(0x836d428, 0x808ad60,
0x836cf50, 0)
D [29/Jan/2006:17:25:11 +0100] ProcessIPPRequest: 5 status_code=1
d [29/Jan/2006:17:25:11 +0100] ProcessIPPRequest: Adding fd 5 to
OutputSet...
d [29/Jan/2006:17:25:11 +0100] WriteClient: Removing fd 5 from OutputSet...
d [29/Jan/2006:17:25:11 +0100] AcceptClient(lis=0x8088c40) 0 NumClients = 1
D [29/Jan/2006:17:25:11 +0100] AcceptClient: 7 from localhost:631.
d [29/Jan/2006:17:25:11 +0100] AcceptClient: Adding fd 7 to InputSet...
d [29/Jan/2006:17:25:11 +0100] ReadClient: 7, used=0, file=-1
D [29/Jan/2006:17:25:11 +0100] ReadClient: 7 POST / HTTP/1.1
d [29/Jan/2006:17:25:11 +0100] decode_auth(0xb7b14c3c): Authorization
string = ""
d [29/Jan/2006:17:25:11 +0100] decode_auth: 7 username=""
d [29/Jan/2006:17:25:11 +0100] IsAuthorized: con->uri = "/"
d [29/Jan/2006:17:25:11 +0100] FindBest: uri = "/"...
d [29/Jan/2006:17:25:11 +0100] FindBest: Location / Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /classes Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /classes/name Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /jobs Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /printers Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /printers/name Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /admin Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location
CUPS_INTERNAL_BROWSE_ACL Limit 0
d [29/Jan/2006:17:25:11 +0100] FindBest: best = "/"
d [29/Jan/2006:17:25:11 +0100] IsAuthorized: auth = 0, satisfy=0...
d [29/Jan/2006:17:25:11 +0100] POST /
d [29/Jan/2006:17:25:11 +0100] CONTENT_TYPE = application/ipp
d [29/Jan/2006:17:25:11 +0100] ReadClient: 7 con->data_encoding =
length, con->data_remaining = 239, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 7, used=0, file=-1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 7 con->data_encoding =
length, con->data_remaining = 231, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 7, used=0, file=-1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 7 con->data_encoding =
length, con->data_remaining = 196, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 7, used=0, file=-1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 7 con->data_encoding =
length, con->data_remaining = 162, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 7, used=124, file=-1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 7 con->data_encoding =
length, con->data_remaining = 125, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ProcessIPPRequest(0xb7b14c3c[7]):
operation_id = 4002
d [29/Jan/2006:17:25:11 +0100] get_printers(0xb7b14c3c[7], 0)
d [29/Jan/2006:17:25:11 +0100] add_printer_state_reasons(0xb7b14c3c[7],
0x8095f38[hp_deskjet_5652])
d [29/Jan/2006:17:25:11 +0100] add_queued_job_count(0xb7b14c3c[7],
0x8095f38[hp_deskjet_5652])
d [29/Jan/2006:17:25:11 +0100] copy_attrs(0x836e910, 0x8093768,
0x836cf50, 0)
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836e910,
0x8093790[printer-uri-supported,4,45])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836e910,
0x80938d0[printer-name,4,42])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836e910,
0x8093928[printer-location,4,41])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836e910,
0x8093978[printer-info,4,41])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836e910,
0x8093bc8[device-uri,4,45])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836e910,
0x8093c68[printer-make-and-model,4,41])
d [29/Jan/2006:17:25:11 +0100] copy_attrs(0x836e910, 0x808ad60,
0x836cf50, 0)
D [29/Jan/2006:17:25:11 +0100] ProcessIPPRequest: 7 status_code=1
d [29/Jan/2006:17:25:11 +0100] ProcessIPPRequest: Adding fd 7 to
OutputSet...
d [29/Jan/2006:17:25:11 +0100] select_timeout: 26 seconds to send browse
update
d [29/Jan/2006:17:25:11 +0100] WriteClient: Removing fd 7 from OutputSet...
d [29/Jan/2006:17:25:11 +0100] AcceptClient(lis=0x8088c40) 0 NumClients = 2
D [29/Jan/2006:17:25:11 +0100] AcceptClient: 8 from localhost:631.
d [29/Jan/2006:17:25:11 +0100] AcceptClient: Adding fd 8 to InputSet...
d [29/Jan/2006:17:25:11 +0100] ReadClient: 8, used=0, file=-1
D [29/Jan/2006:17:25:11 +0100] ReadClient: 8 POST / HTTP/1.1
d [29/Jan/2006:17:25:11 +0100] decode_auth(0xb7b17870): Authorization
string = ""
d [29/Jan/2006:17:25:11 +0100] decode_auth: 8 username=""
d [29/Jan/2006:17:25:11 +0100] IsAuthorized: con->uri = "/"
d [29/Jan/2006:17:25:11 +0100] FindBest: uri = "/"...
d [29/Jan/2006:17:25:11 +0100] FindBest: Location / Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /classes Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /classes/name Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /jobs Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /printers Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /printers/name Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location /admin Limit 7f
d [29/Jan/2006:17:25:11 +0100] FindBest: Location
CUPS_INTERNAL_BROWSE_ACL Limit 0
d [29/Jan/2006:17:25:11 +0100] FindBest: best = "/"
d [29/Jan/2006:17:25:11 +0100] IsAuthorized: auth = 0, satisfy=0...
d [29/Jan/2006:17:25:11 +0100] POST /
d [29/Jan/2006:17:25:11 +0100] CONTENT_TYPE = application/ipp
d [29/Jan/2006:17:25:11 +0100] ReadClient: 8 con->data_encoding =
length, con->data_remaining = 239, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 8, used=0, file=-1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 8 con->data_encoding =
length, con->data_remaining = 231, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 8, used=0, file=-1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 8 con->data_encoding =
length, con->data_remaining = 196, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 8, used=0, file=-1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 8 con->data_encoding =
length, con->data_remaining = 162, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 8, used=124, file=-1
d [29/Jan/2006:17:25:11 +0100] ReadClient: 8 con->data_encoding =
length, con->data_remaining = 125, con->file = -1
d [29/Jan/2006:17:25:11 +0100] ProcessIPPRequest(0xb7b17870[8]):
operation_id = 4002
d [29/Jan/2006:17:25:11 +0100] get_printers(0xb7b17870[8], 0)
d [29/Jan/2006:17:25:11 +0100] add_printer_state_reasons(0xb7b17870[8],
0x8095f38[hp_deskjet_5652])
d [29/Jan/2006:17:25:11 +0100] add_queued_job_count(0xb7b17870[8],
0x8095f38[hp_deskjet_5652])
d [29/Jan/2006:17:25:11 +0100] copy_attrs(0x836d3e8, 0x8093768,
0x8094fa8, 0)
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d3e8,
0x8093790[printer-uri-supported,4,45])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d3e8,
0x80938d0[printer-name,4,42])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d3e8,
0x8093928[printer-location,4,41])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d3e8,
0x8093978[printer-info,4,41])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d3e8,
0x8093bc8[device-uri,4,45])
d [29/Jan/2006:17:25:11 +0100] copy_attribute(0x836d3e8,
0x8093c68[printer-make-and-model,4,41])
d [29/Jan/2006:17:25:11 +0100] copy_attrs(0x836d3e8, 0x808ad60,
0x8094fa8, 0)
D [29/Jan/2006:17:25:11 +0100] ProcessIPPRequest: 8 status_code=1
d [29/Jan/2006:17:25:11 +0100] ProcessIPPRequest: Adding fd 8 to
OutputSet...
d [29/Jan/2006:17:25:11 +0100] select_timeout: 26 seconds to send browse
update
d [29/Jan/2006:17:25:11 +0100] WriteClient: Removing fd 8 from OutputSet...
d [29/Jan/2006:17:25:12 +0100] ReadClient: 7, used=0, file=-1
d [29/Jan/2006:17:25:12 +0100] ReadClient: httpGets returned EOF...
D [29/Jan/2006:17:25:12 +0100] CloseClient: 7
d [29/Jan/2006:17:25:12 +0100] CloseClient: Removing fd 7 from InputSet
and OutputSet...
d [29/Jan/2006:17:25:12 +0100] ReadClient: 8, used=0, file=-1
d [29/Jan/2006:17:25:12 +0100] ReadClient: httpGets returned EOF...
D [29/Jan/2006:17:25:12 +0100] CloseClient: 8
d [29/Jan/2006:17:25:12 +0100] CloseClient: Removing fd 8 from InputSet
and OutputSet...
d [29/Jan/2006:17:25:13 +0100] select_timeout: 24 seconds to send browse
update
Scusate per il post lungo, spero che così sia più chiaro. Ah, uso una
Debian testing.
Grazie!!!
ByEz!!!
Reply to: