Re: PCMCIA : II appello
Mattia Dongili ha scritto:
On Fri, Oct 07, 2005 at 04:23:13PM +0200, Luca Bruno wrote:
confrey <confrey@tariffenet.it> scrisse:
Ciao sono ancora io, portatile Amilo A1640 con sarge; il problema si
presenta comunque con altre distribuzioni (ubuntu vecchia e nuova,
knoppix) : la PCMCIA non risponde, non rileva neppure l'esistenza di
schede inserite.
[...]
Il mio lettore era a 16 bit e la scheda a 32, per cui non si vedevano.
dice che con "altri sistemi operativi"(TM) funziona...
Sarebbe utile se postasse (com gia' gli ho chiesto) il dmesg completo e
l'output di /proc/iomem, ma si deve essere dimenticato... :)
toccato! hai ragione, di questo mi ero dimenticato; colgo l'occasione
per elencare le -uniche- due peroferiche PCMCIA che possiedo :
Scheda multifunzione 3Com 3C562D/3C563D; è una LAN 10Mb+Modem33.6; in XP
non viene riconosciuta, è però presente nel database dei driver,
installato il driver il sistema dice 'Impossibile avviare la
periferica'; funzionava su un NB IBM vecchiotto (Pentium 90)
Adattatore DelkinDDCFFLS1-AD, adattatore da CF a PCMCIA, in XP funziona.
Poi c'è il lettore integrato di SD, che in XP ovviamente funziona, e,
sempre dalle proprietà hardware di XP, mi pare di capire che funzioni
sempre attraverso il bus della PCMCIA
Ecco il cat di /proc/iomem :
dariomlap:/home/dario# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbfff : Video ROM
000cc000-000d5fff : Adapter ROM
000f0000-000fffff : System ROM
00100000-1dfcffff : System RAM
00100000-0028ed2c : Kernel code
0028ed2d-0034333f : Kernel data
1dfd0000-1dfdefff : ACPI Tables
1dfdf000-1dffffff : ACPI Non-volatile Storage
1e000000-1e000fff : 0000:00:09.1
1e000000-1e000fff : yenta_socket
1e001000-1e001fff : 0000:00:09.0
1e001000-1e001fff : yenta_socket
1e400000-1e7fffff : PCI CardBus #02
1e800000-1ebfffff : PCI CardBus #02
1ec00000-1effffff : PCI CardBus #06
1f000000-1f3fffff : PCI CardBus #06
cfd00000-dfcfffff : PCI Bus #01
d0000000-d7ffffff : 0000:01:00.0
d0000000-d0ffffff : vesafb
dfe00000-dfefffff : PCI Bus #01
dfee0000-dfefffff : 0000:01:00.0
dfff4000-dfff7fff : 0000:00:06.0
dfffa000-dfffafff : 0000:00:09.2
dfffb800-dfffbfff : 0000:00:06.0
dfffb800-dfffbfff : ohci1394
dfffc000-dfffcfff : 0000:00:04.0
dfffc000-dfffcfff : sis900
dfffd000-dfffdfff : 0000:00:03.0
dfffd000-dfffdfff : ohci_hcd
dfffe000-dfffefff : 0000:00:03.1
dfffe000-dfffefff : ohci_hcd
dffff000-dfffffff : 0000:00:03.3
dffff000-dfffffff : ehci_hcd
e0000000-e1ffffff : 0000:00:00.0
fff80000-ffffffff : reserved
il dmesg :
dariomlap:/home/dario# dmesg
ntries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000
00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000010 00000000
00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...it isn't (bad gzip magic numbers);
looks like an initrd
Freeing initrd memory: 4736k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 2)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
audit: initializing netlink socket (disabled)
audit(1128719629.902:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 18
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, kswapd0 not stopped
Strange, kseriod not stopped
done
ACPI wakeup devices:
LID MAC AC97 MC97 SLPB
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4736KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 164k freed
vesafb: framebuffer at 0xd0000000, mapped to 0xde880000, using 937k,
total 16384k
vesafb: mode is 800x600x8, linelength=800, pages=15
vesafb: protected mode interface info at cbdd:0004
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=6:6:6:6, shift=0:0:0:0
fb0: VESA VGA frame buffer device
Console: switching to colour frame buffer device 100x37
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST960821A, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
Probing IDE interface ide1...
hdc: PHILIPS DVD+/-RW SDVD8431, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
APIC error on CPU0: 00(40)
Adding 522072k swap on /dev/hda6. Priority:-1 extents:1
EXT3 FS on hda7, internal journal
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 0
new absolute packet format
Touchpad has extended capability bits
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio2
ieee1394: Initialized config rom entry `ip1394'
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e)
powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x13 (1075 mV)
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
cpu_init done, current fid 0xa, vid 0x8
Capability LSM initialized
ts: Compaq touchscreen protocol output
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[dfffb800-dfffbfff] Max Packet=[2048]
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:03:0d:20:9f:39.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: irq 20, pci mem 0xdfffd000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0
Controller (#2)
ohci_hcd 0000:00:03.1: irq 21, pci mem 0xdfffe000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ieee1394: Node added: ID:BUS[0-00:1023] GUID[0800460103322cde]
ieee1394: Host added: ID:BUS[0-01:1023] GUID[00030d5325513a32]
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on
usb-0000:00:03.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ieee1394: raw1394: /dev/raw1394 device initialized
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 760 chipset
agpgart: Maximum main memory to use for agp memory: 409M
agpgart: AGP aperture is 4M @ 0xe0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i2c-sis96x version 1.0.0
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
intel8x0_measure_ac97_clock: measured 49634 usecs
intel8x0: clocking to 48000
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.3: irq 23, pci mem 0xdffff000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 1-1: USB disconnect, address 2
usb 1-1: new low speed USB device using ohci_hcd and address 3
input: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on
usb-0000:00:03.0-1
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
Yenta: CardBus bridge found at 0000:00:09.0 [1734:106c]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0000, PCI irq 17
Socket status: 07070000
ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 17 (level, low) -> IRQ 17
Yenta: CardBus bridge found at 0000:00:09.1 [1734:106c]
Yenta: ISA IRQ mask 0x0000, PCI irq 17
Socket status: 00000000
input: PC Speaker
eth0: Media Link On 100mbps full-duplex
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
ACPI: Thermal Zone [THRM] (75 C)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
lp: driver loaded but no devices found
cs: IO port probe 0x0100-0x04ff: excluding 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0800-0x08ff: excluding 0x818-0x837 0x840-0x84f
0x858-0x89f
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0315d40(lo)
IPv6 over IPv4 tunneling driver
mtrr: 0xd0000000,0x2000000 overlaps existing 0xd0000000,0x1000000
eth0: no IPv6 routers present
ohci1394: fw-host0: Waking dma ctx=1 ... processing is probably too slow
ohci1394: fw-host0: Waking dma ctx=1 ... processing is probably too slow
ieee1394: Node changed: 0-01:1023 -> 0-00:1023
ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[0800460103322cde]
ohci_hcd 0000:00:03.0: remove, state 1
usb usb1: USB disconnect, address 1
usb 1-1: USB disconnect, address 3
ohci_hcd 0000:00:03.0: USB bus 1 deregistered
ohci_hcd 0000:00:03.1: remove, state 1
usb usb2: USB disconnect, address 1
ohci_hcd 0000:00:03.1: USB bus 2 deregistered
ehci_hcd 0000:00:03.3: remove, state 1
usb usb3: USB disconnect, address 1
ehci_hcd 0000:00:03.3: USB bus 3 deregistered
Stopping tasks:
====================================================================================|
Back to C!
Warning: CPU frequency is 800000, cpufreq assumed 1600000 kHz.
ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 19
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
APIC error on CPU0: 00(40)
hdc: set_drive_speed_status: status=0x40 { DriveReady }
ide: failed opcode was 100
Restarting tasks... done
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:03:0d:20:9f:39.
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: irq 20, pci mem 0xdfffd000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0
Controller (#2)
ohci_hcd 0000:00:03.1: irq 21, pci mem 0xdfffe000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
input: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on
usb-0000:00:03.0-1
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.3: irq 23, pci mem 0xdffff000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 1-1: USB disconnect, address 2
usb 1-1: new low speed USB device using ohci_hcd and address 3
input: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on
usb-0000:00:03.0-1
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ecco, spero che chi, possedendo le giuste conoscenze - che io non ho -
possa tirarmi fuori da questo inghippo
saluti a tutti, e grazie
confrey
p.s. : Mattia, grazie per la pazienza... :)
Reply to: