Periferica trovata dal kernel solo qualche volta
Ciao, Ho un problema molto strano sul mio portatile Dell inpsiron 5100
con Linux (Debian).
Alcune volte il mio cd su hda viene trovato dal kernel e alcune volte
no.
(Ovviamente quando lo devo usare scopro che si e' verificata
la seconda che ho detto). I due pezzi di listato di dmesg nei due casi
sono
riportati sotto (come vedete nel primo manca la riga
>>>>hda: HL-DT-STCD-RW/DVD-ROM GCC-4241N, ATAPI CD/DVD-ROM drive)
Qualcuno ha qualche idea su come andar dietro a una bega simile?
Grazie Roberto
--caso NON TROVATO il CD
------------------------------------------------------------------------------------------------------------
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
hdc: FUJITSU MHT2030AT, ATA DISK drive
blk: queue c043f4b4, I/O limit 4095Mb (mask 0xffffffff)
ide1 at 0x170-0x177,0x376 on irq 15
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=58140/16/63,
UDMA(33)
Partition check:
hdc: [PTBL] [3648/255/63] hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 >
SCSI subsystem driver Revision: 1.00
------------------------------------------------------------------------------------------------------------
----caso TROVATO il CD
------------------------------------------------------------------------------------------------------------
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
hda: HL-DT-STCD-RW/DVD-ROM GCC-4241N, ATAPI CD/DVD-ROM drive
hdc: FUJITSU MHT2030AT, ATA DISK drive
blk: queue c043f4b4, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=58140/16/63,
UDMA(100)
hda: attached ide-scsi driver.
Partition check:
hdc: [PTBL] [3648/255/63] hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 >
SCSI subsystem driver Revision: 1.00
Reply to: