[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [OT] Multi Card Reader



Silvio Bacchetta wrote:
>>Ho il 2.6.11.8 e udev, ho gia abilitato il multi LUN per l'SCSI, mi
>>avevano detto che poteva dipendere da questo...
> 
> Sì, i lettori multipli hanno più LUN. Controlla nel log del kernel cosa viene 
> riconosciuto quando colleghi il tuo e magari postalo qui. Io ho risolto 
> appunto abilitando la scansione di tutti i LUN.
> 
Questo e' un tail al syslog:

May 11 00:23:56 (none) kernel: usb 1-5: new high speed USB device
using ehci_hcd and address 25
May 11 00:23:56 (none) kernel: uba: device 25 capacity nsec 0 bsize 512
May 11 00:23:57 (none) usb.agent[3295]:      ub: already loaded
May 11 00:23:57 (none) udev[3338]: creating device node '/dev/uba'
May 11 00:23:58 (none) kernel: uba: device 25 capacity nsec 0 bsize 512
May 11 00:24:16 (none) last message repeated 9 times
May 11 00:24:18 (none) kernel: uba: device 25 capacity nsec 0 bsize 512
May 11 00:24:48 (none) last message repeated 15 times
May 11 00:25:00 (none) last message repeated 6 times
May 11 00:25:02 (none) kernel: uba: device 25 capacity nsec 0 bsize 512
May 11 00:25:16 (none) last message repeated 7 times
May 11 00:25:18 (none) kernel: uba: device 25 capacity nsec 0 bsize 512

all'inserimento della cf che riesco a montare ed a gestire senza problemi:

May 11 00:25:02 (none) kernel: uba: device 25 capacity nsec 0 bsize 512
May 11 00:25:16 (none) last message repeated 7 times
May 11 00:25:18 (none) kernel: uba: device 25 capacity nsec 0 bsize 512
May 11 00:25:48 (none) last message repeated 15 times
May 11 00:26:16 (none) last message repeated 14 times
May 11 00:26:18 (none) kernel: uba: device 25 capacity nsec 0 bsize 512
May 11 00:26:20 (none) kernel: uba: device 25 capacity nsec 31488 bsize 512
May 11 00:26:20 (none) kernel: uba: device 25 capacity nsec 31488 bsize 512
May 11 00:26:20 (none) kernel:  /dev/ub/a: p1
May 11 00:26:20 (none) udev[3406]: creating device node '/dev/uba1'

all'inserimento della sd/mmc non rileva nulla e i log non stampano nulla...

Matteo



Reply to: