Nuova gestione scanner....a voi va?
Accidenti, continuo a non approvare questo cambio di gestione degli
scanner tramite hotplug libusb ecc visto che non mi va piu' nulla!
Veniamo al problema:
found USB scanner (vendor=0x04b8 [EPSON], product=0x010b
[Perfection1240]) at libusb:001:003
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
E lo scanner c'e', poi
jabawack:/home/frank# cat /etc/hotplug/usb/libsane.usermap
# This file is installed by the libsane Debian package.
#
# Sample entry (replace 0xVVVV and 0xPPPP with vendor ID and product ID
respectively) :
libusbscanner 0x0003 0x04b8 0x010b 0x0000
0x0000 0x00 0x00 0x00
0x00 0x00 0x00 0x00000000
#
I parametri tornano,
jabawack:/home/frank# cat /etc/fstab
<cut>
none /proc/bus/usb usbfs defaults 0 0
usbfs montato,
jabawack:/home/frank# ll /proc/bus/usb/001/003
-rw-r--r-- 1 root root 50 May 1 17:31
/proc/bus/usb/001/003
li avevo messi a 660 come root.scanner ma dopo un riavvio sono tornati
come prima ....bah
jabawack:/home/frank# cat /etc/sane.d/epson.conf
# USB scanner - only enable this if you have an EPSON scanner. It could
# otherwise block your non-EPSON scanner from being
# recognized.
# Depending on your distribution, you may need either the
# first or the second entry.
#/dev/usb/scanner0
/proc/bus/usb/001/003
Hotplug e' montato ma da questo messaggio:
jabawack:/etc/init.d# ./hotplug restart
Restarting hotplug subsystem: input
net
pci
usb
input
evdev: already loaded
evdev: already loaded
net
pci
uhci-hcd: loaded sucessfully
uhci-hcd: already loaded
ignore pci display device on 01:00.0
snd-emu10k1: already loaded
via-rhine: already loaded
usb
** can't synthesize root hub events
e a me lo scanner non va neanche a spingere....
A qualcuno lo scanner va settato alla nuova maniera?
Help PLEASE :)
Grazie
--
Francesco
(o< (o_
//\ //\
V_/_....Powered By Debian GNU/Linux....V_/_
http://xoomer.virgilio.it/frpiano
Reply to: