xawtv

[Giordano <jordan83@inwind.it>]

Salve a tutti!

Ho appena installato una Pinnacle pctv rave, ma non riesco a far andare
xawtv.
Ho seguito i consigli trovati nella home di uno
(http://www.giungato.it/antonio/) che ha installato tale scheda sotto
una slack, e tutto sembra essere a posto.

Da dmesg:

i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:0a.0, irq: 10, latency: 32, mmio: 0xea000000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,insmod option]
i2c-algo-bit.o: Adapter: bt848 #0 scl: 1  sda: 1 -- testing...
i2c-algo-bit.o:1 scl: 1  sda: 0 
i2c-algo-bit.o:2 scl: 1  sda: 1 
i2c-algo-bit.o:3 scl: 0  sda: 1 
i2c-algo-bit.o:4 scl: 1  sda: 1 
i2c-algo-bit.o: bt848 #0 passed test.
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c tda9887 driver registered.
tda9887: chip found @ 0x86
i2c-core.o: client [tda9887] registered to adapter [bt848 #0](pos. 0).
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc0
tuner(bttv): type forced to 0 (Temic PAL (4002 FH5)) [insmod]
tuner: type already set (0)
i2c-core.o: client [Temic PAL (4002 FH5)] registered to adapter [bt848
#0](pos. 1).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-dev.o: Registered 'bt848 #0' as minor 0

e lsmod:

i2c-dev                 3808   0 (unused)
tuner                   9476   1 (autoclean)
tda9887                 2944   1 (autoclean)
tvaudio                12640   0 (autoclean) (unused)
bttv                   96512   0 (unused)
videodev                5664   2 [bttv]
i2c-algo-bit            7180   1 [bttv]
i2c-core               12960   0 [i2c-dev tuner tda9887 tvaudio bttv
i2c-algo-bit]

Lanciando xawtv ottengo:

gio@debian:~$ xawtv
This is xawtv-3.72, running on Linux/i686 (2.4.22)
Segmentation fault

E' un bug? O ho sbagliato qualcosa?
Aggiungo che non ho ancora attaccato l'antenna, devo ancora passare il
cavo, ma non credo ciò influisca.

Vi mostro anche quanto inserito in modutils/actions:

# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner
alias char-major-89 i2c-dev
options i2c-core i2c_debug=1
options i2c-algo-bit bit_test=1
alias char-major-81 videodev
alias char-major-81-0 bttv
options tuner debug=0 type=0
options bttv card=39 radio=0 pll=1
options msp3400 once=1 simple=1

e in .xawtv:
[global]
ratio = 4:3
freqtab = italy
pixsize = 128 x 96
pixcols = 1
jpeg-quality = 75
keypad-ntsc = no
keypad-partial = yes
osd = yes
[defaults]
norm = PAL
input = Television
capture = grab
color = 55%
bright = 55%
hue = 48%
contrast = 28%

Scusate l'enorme prolissità ma spero di aver dato più dati possibili.
In alternativa che altri programmi ci sono per la tv? "apt-cache search
tv" non mi ha illuminato molto.

Grazie infinite, ciao!