Problemi con X dopo aggiornamento a woody
Ho installato una patata su un Compaq Deskpro e poi ho aggiornato a woody: i
pacchetti relativi ad X presenti nel sistema ora sono questi:
xbase-clients 4.1.0-16
xbooks 3.3.6-1
xchat-common 1.8.8-3
xcontrib 3.3.3.1-0.1
xdm 4.1.0-16
xext 3.3.6-44
xf86setup 3.3.6-11potato
xfonts-100dpi 4.1.0-16
xfonts-75dpi 4.1.0-16
xfonts-base 4.1.0-16
xfonts-cjk 3.3.6-2
xfonts-cyrilli 4.1.0-16
xfonts-pex 4.1.0-16
xfonts-scalabl 4.1.0-16
xfree86-common 4.1.0-16
xfs 4.1.0-16
xgalaga 2.0.34-18
xlib6g 4.1.0-16
xlib6g-dev 4.1.0-16
xlibmesa3 4.1.0-16
xlibs 4.1.0-16
xlibs-dev 4.1.0-16
xmh 4.1.0-16
xnest 4.1.0-16
xproxy 3.3.6-11potato
xprt 4.1.0-16
xscavenger 1.4.2-1
xserver-common 4.1.0-16
xserver-common 3.3.6-44
xserver-svga 3.3.6-44
xserver-vga16 3.3.6-44
xsm 3.3.6-11potato
xterm 4.1.0-16
xtris 1.15-2
xutils 4.1.0-16
xvfb 4.1.0-16
xviddetect 0.3-4
prima di aggiornare, su consiglio di fog avevo eliminato _completamente_ i
task relativi ad X in modo da non dovermi ritrovare pezzi di XFree 3.3.6 fra
i piedi ed invece, come si puo' notare, ce ne sono eccome ma il peggio non
e' questo, e' che, una volta configurato il server con xf86config (XF86Setup
non mi piace perche' 1) e' grafico 2) non riesco a fargli fare quello che
voglio) eseguendo 'startx' non si avvia niente e termina con un errore
relativo a dei presunti moduli. Premetto che la sk video e' una I810.
Questo e' il log ottenuto:
warning: process set to nice value 0 instead of -10 as requested
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1),
GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR,
Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, AT24,
AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
Voodoo Banshee, Voodoo3, smi, generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
dbe: Unknown error loading module
Config Error: /etc/X11/XF86Config:48
SubSection "extmod"
^^^^^^^^^^^
Module section keyword expected
Fatal server error:
Child error writing to pipe (Broken pipe)
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
--
Pierluigi De Rosa (thorin@linux.it).
<< LINUX: the choice of a GNU generation >>
<< For my real address... ask the Balrog. >>
* Sostenete la Lega per la Soppressione dei Troll *
--
To UNSUBSCRIBE, email to debian-italian-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: