Re: Controller pci-to-ide
On Mon, Jul 29, 2002 at 01:15:17PM +0200, InSa wrote:
> Salve a tutti,
>
> ho comprato un controller "ACARD Ultra ATA-133 AEC-6280 PCI-to-IDE Ultra
> ATA-133", e vorrei utilizzarlo anche col pinguino. Ho scaricato i driver
> dall'indirizzo "
> http://161.58.88.33/download/linux/driver/ide/aec6280_ver10.tar " ,
> scompattati ed ho capito che devo inserirli in
> /usr/src/linux/drivers/ide , abilitare le opzioni relative al controller
> e ricompilare il kernel. Ora ho fatto tutto questo, ma quando eseguo "
> make dep && make clean && make bzImage && make modules && make
> modules_install " ottengo questo errore:
>
> make[2]: Entering directory `/usr/src/linux/drivers/ide'
> make all_targets
> make[3]: Entering directory `/usr/src/linux/drivers/ide'
> gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common
> -pipe -mpreferred-stack-boundary=2 -march=i686 -malign-functions=4
> -DEXPORT_SYMTAB -c ide.c gcc -D__KERNEL__ -I/usr/src/linux/include -Wall
> -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
> -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
> -march=i686 -malign-functions=4 -DEXPORT_SYMTAB -c ide-features.c
> gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common
> -pipe -mpreferred-stack-boundary=2 -march=i686 -malign-functions=4
> -c -o aec62xx.o aec62xx.c aec62xx.c: In function `aec62xx_get_info':
> aec62xx.c:72: `PCI_DEVICE_ID_ARTOP_ATP865' undeclared (first use in this
> function) aec62xx.c:72: (Each undeclared identifier is reported only
> once aec62xx.c:72: for each function it appears in.)
> make[3]: *** [aec62xx.o] Error 1
> make[3]: Leaving directory `/usr/src/linux/drivers/ide'
> make[2]: *** [first_rule] Error 2
> make[2]: Leaving directory `/usr/src/linux/drivers/ide'
> make[1]: *** [_subdir_ide] Error 2
> make[1]: Leaving directory `/usr/src/linux/drivers'
> make: *** [_dir_drivers] Error 2
>
> e si pianta.
> Suggerimenti?!?
>
> Utilizzo debian 3.0 con kernel 2.4.17
>
>
Si, due: passa a 2.4.18 e poi accertati di usare un diff file piuttosto:
non e' detto che quello che hai trovato sia codice per la tua release
di kernel. Usare patch --dry-run e' un simapatico modo per
accertartene.
--
Francesco P. Lovergine
--
To UNSUBSCRIBE, email to debian-italian-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: