Re:epilogo [era Re: matrox + dri !lunga!]
On Mon, 22 Oct 2001, serena [qwerty] l. wrote:
> > > quello che non va bene e' il kernel (2.2.19, vedo)
> >
> > nein! kernel 2.4.6, con opzione agpgart eccetera.
> > dove hai visto 2.2.19?
>
> qui nel log che hai postato:
> ....
> Operating System: Linux 2.2.19 i686 [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.1.log", Time: Sun Oct 21 01:06:22 2001
> [eccetera]
piergi@tty2:~$ uname -a
Linux debian 2.4.6 #1 Sat Sep 29 17:15:52 CEST 2001 i686 unknown
non so perche' xf86 dica diversamente.
(tra l'altro, prima avevo il 2.2.15 e non il 19!)
> > > #more /usr/X11R6/lib/X11/doc/README.DRI
> > > (sezione 4. Prerequisite Software)
>
> Anche la sezione 6 e' interessante:
>
> ....
> Finally, the Screen section of the XF86Config file may have to be specially
> configured as well. For example, Voodoo3 hardware acceleration is only
> available in 16bpp mode.
> ^^^^^^^^^^
> Section "Screen"
> Identifier "Screen 1"
> Device "Voodoo3"
> Monitor "High Res Monitor"
> DefaultDepth 16
> ^^^^^^^^^^^^^^^
> Subsection "Display"
> Depth 16
> Modes "1280x1024" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> EndSection
>
> Replace Voodoo3 with G400 for Matrox G400.
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
io ho questo:
Section "Screen"
Identifier "Display 1"
Device "Matrox G400 16M"
Monitor "Hitachi CM640ET"
DefaultDepth 16 #24
# DefaultFbBPP 32
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600"
EndSubSection
EndSection
ma non c'e` verso di farlo funzionare -o meglio: tuxracer, con
cui faccio la verifica, e` incatramato da matti-
quello che piu` mi irrita e` che i maledetti log dicono che
funziona tutto!!
XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.19 i686 [ELF]
??????
[...]
(--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 3, Mem @ 0xe8000000/25, 0xe4000000/14, 0xe5000000/23
[...]
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.1
[...]
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(II) Loading /usr/X11R6/lib/modules/drivers/mga_hal_drv.o
(II) Module mga_hal: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) MGA(0): Matrox HAL module used
(**) MGA(0): Chipset: "mgag400"
(II) MGA(0): Offscreen memory usage will be limited to 512 lines if the DRI is enabled.
(**) MGA(0): Using AGP Mode 2x
(--) MGA(0): Linear framebuffer at 0xE8000000
(--) MGA(0): MMIO registers at 0xE4000000
(--) MGA(0): Pseudo-DMA transfer window at 0xE5000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07C80
(WW) MGA(0): Video BIOS info block not detected!
^^^^^^^^^^^^
questo c'entra?
[...]
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2196+632: 2828
(0): [drm] created "mga" driver at busid "PCI:1:0:0"
(0): [drm] added 4096 byte SAREA at 0xd6b5f000
(0): [drm] mapped SAREA 0xd6b5f000 to 0x4001a000
(0): [drm] framebuffer handle = 0xe8000000
(0): [drm] added 1 reserved context for kernel
(II) MGA(0): [drm] Registers = 0xe4000000
[drm] drmAgpEnabled succeeded for AGP mode 2x
(II) MGA(0): WARP Microcode Loaded
(II) MGA(0): [drm] calced backoffset: 0x307000
(II) MGA(0): [drm] added 31 65536 byte DMA buffers
(II) MGA(0): [drm] Mga Dma Initialization start
(II) MGA(0): [drm] Mga Dma Initialization done
(II) MGA(0): [drm] Initialized Dma Engine
(II) MGA(0): [drm] dma control initialized, using IRQ 11
(II) MGA(0): visual configs initialized
(II) MGA(0): Using 512 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillMono8x8PatternRects replacement
Setting up tile and stipple cache:
20 128x128 slots
4 256x256 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): Using overlay video
(0): X context handle = 0x00000001
(0): [drm] installed DRM signal handler
(0): [DRI] installation complete
(II) MGA(0): direct rendering enabled
^^^^^^^^^^^^^^^^^^^^^^^^
[...]
adesso provo a ricompilare il kernel 2.4.12, e vediamo se ne vengo
fuori.
ti sapro` dire.
[ormai e` una questione di principio!]
[prevedo una notte insonne]
ciao
--
:::: sespiergi(at)iol(dot)it ::::
:::::::::::::::::::::::::::::::::
:::: GNU/Linux user # 190604 ::::
Reply to: