Re: load balanced nic
Ross Halliday wrote:
Actually the switch is outside managed so i cannot myself make any
changes. I do know it is set to 100 full. The switch does show errors
on it also.
Are you seeing any errors on the switch? Do you have the link speed
forced on the 3750 (ie 1000/FDX)? Might be worth a try poking around
with ethtool and force the speed at both ends.
From: Chris Parker [mailto:email@example.com]
Sent: Monday, September 22, 2008 6:18 PM
Subject: load balanced nic
I have a load balanced nic, bond0 that is giving errors on the tx side.
each nic, slave 1 and slave 2 have a different amount of errors on the
tx side. Also they each show collisions. they are connected to a cisco
3750 switch. That also shows errors on rcv and fc?
The bond is set up as adaptive load balance. I used this one due to not
having to change configuration on the switch. Atleast the kernel doc
said there was no config changes needed at the switch.
any ideas or pointers would be highly appreciated.
if more information is needed please let me know. I do not have
access to the configuration on the switches just the nics on the server.
To UNSUBSCRIBE, email to debian-isp-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
I recieved a call trace in dmesg this morning also.
i can get more information tomorrow as i am home now. Thank you for