Re: HP and Debian "support" (was: Blade server recommendations?)

[Emmanuel Lacour <elacour@easter-eggs.com>]

On Fri, May 13, 2005 at 04:01:40PM +0200, Markus Oswald wrote:
> I just installed it on a DL360G4 running Sarge and linux-2.6.11.
> Seems to work fine with the SmartArray 6 series:
> 
> smtp-1:~# /etc/init.d/cpqarrayd start
> Starting cpqarrayd: Checking for controllers.. 
> DEBUG: Discarding old event 5/0/0
> DEBUG: Discarding old event 5/2/0
> Done
> Monitoring list
>  [ 0] Controller type 'CCISS Controller' at /dev/cciss/c0d0
> Pid is 10917
> cpqarrayd.
> smtp-1:~#
> 

I just received two ML380 G4 and did the test. Seems to works fine and
give informations when removing a drive of a RAID1 array :)

Dec  3 07:48:46 localhost cpqarrayd: CCISS controler /dev/cciss/c0d0 reported: Hot-plug drive removed: SCSI port 2 ID 0.
Dec  3 07:48:46 localhost cpqarrayd: CCISS controler /dev/cciss/c0d0 reported: Physical drive failure: SCSI port 2 ID 0.
Dec  3 07:48:46 localhost cpqarrayd: CCISS controler /dev/cciss/c0d0 logical volume 0 changed state to Logical drive is using interim recovery mode.
Dec  3 07:49:16 localhost cpqarrayd: CCISS controler /dev/cciss/c0d0 reported: Hot-plug drive inserted: SCSI port 2 ID 0.
Dec  3 07:49:16 localhost cpqarrayd: CCISS controler /dev/cciss/c0d0 logical volume 0 changed state to Logical drive is ready for recovery operation.
Dec  3 07:49:16 localhost cpqarrayd: CCISS controler /dev/cciss/c0d0 logical volume 0 changed state to Logical drive is is currently recovering.


This was done with a fresh up-to-date sarge install with default kernel.

-- 
Emmanuel Lacour ------------------------------------ Easter-eggs
44-46 rue de l'Ouest  -  75014 Paris   -   France -  Métro Gaité
Phone: +33 (0) 1 43 35 00 37    -     Fax: +33 (0) 1 41 35 00 76
mailto:elacour@easter-eggs.com   -    http://www.easter-eggs.com