RE: transfer rate
> Are you sure? I used it a long time ago with Realtek cards, and it worked
> fine.
It works fine for mee too:
stefan@ididntdoit:~$ mii-diag eth1
Basic registers of MII PHY #32: 1100 782d 0000 0000 0501 45e1 0001 0000.
The autonegotiated capability is 0100.
The autonegotiated media type is 100baseTx-FD.
Basic mode control register 0x1100: Auto-negotiation enabled.
You have link beat, and everything is working OK.
Your link partner advertised 45e1: Flow-control 100baseTx-FD 100baseTx
10baseT-FD 10baseT, w/ 802.3X flow control.
End of basic transceiver information.
I use the rtl8139 module. Perheps he uses the 8139too module.
Groetjes,
Stefan
--
stefan@bugs.nl / www.bugs.nl
"What's up doc?"
--
To UNSUBSCRIBE, email to debian-isp-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: