RE: NETWORK ROUTES
My office network is: 172.16.16.0/24 and his IP is: 172.16.16.1.
My web network is: 172.16.8.0/24 and his IP is: 172.16.8.1
My service network is: 172.16.4.0/24 and his IP is: 172.16.4.1
My public network is:188.8.131.52/28 and his IP is: 184.108.40.206.
The public router is 220.127.116.11 (and only works with the range
The office router is 172.16.16.254 (and only works with the range
The static default route is 172.16.16.254
This is my route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
18.104.22.168 0.0.0.0 255.255.255.240 U 0 0 0
eth0 172.16.4.0 0.0.0.0 255.255.255.0 U 0 0
0 eth1 172.16.16.0 0.0.0.0 255.255.255.0 U 0 0
0 eth3 172.16.8.0 0.0.0.0 255.255.255.0 U 0 0
0 eth2 0.0.0.0 172.16.16.254 0.0.0.0 UG 0 0
And my dinamic route to using the public network is:
ip rule add from 22.214.171.124 table publica
ip route add from default via 126.96.36.199 dev eth0 table publica
ip route flush cache
And the problem is when I try to use 188.8.131.52 in my internals
networks doesnt run because the information goes by 184.108.40.206 and
in the normal routes.
De: Jeremy C. Reed [mailto:firstname.lastname@example.org]
Enviado el: jueves, 24 de octubre de 2002 19:01
Para: Ángel Carrasco
CC: Debian ISP List
Asunto: Re: NETWORK ROUTES
On Thu, 24 Oct 2002, Ángel Carrasco wrote:
> All runs good but my problem is when I try to use the IP of my first card
> my internals networks
> doesn't work because, all information doesn't go by internals networks, it
> goes by the big network.
Show us your interface setup and your routes.
Jeremy C. Reed
BSD software, documentation, resources, news...
To UNSUBSCRIBE, email to email@example.com
with a subject of "unsubscribe". Trouble? Contact