Re: adaptec raid 2400A
On Tue, Jun 11, 2002 at 12:14:55PM +0200, IOhannes zmoelnig wrote:
> hello list!
> i have just subscribed to this list, so i hope this is the right place
> to ask:
> i'm gonna purchase a raid-controller for our file-server
> does the adaptec raid-2400A work under debian/woody ? (since the
> documentation speaks of old mandrakes/redhats (with kernels ~ 2.2.14 !)
> i do not want to spend the money for nothing.
I build custom boot-floppies as a flavour of bf2.4
(boot-floppies-3.0.22) and documented the kernel config changes in
'configbf2.4.gz'. With these disks I am able to boot Adaptec RAID2100S
SCSI subsystem driver Revision: 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5
Detecting Adaptec I2O RAID controllers...
Adaptec I2O RAID controller 0 at e0802000 size=100000 irq=5
dpti: If you have a lot of devices this could take a few minutes.
dpti0: Reading the hardware resource table.
TID 519 Vendor: ADAPTEC Device: RAID-5 Rev: 370F
scsi0 : Vendor: Adaptec Model: 2100S FW:370F
Vendor: ADAPTEC Model: RAID-5 Rev: 370F
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
SCSI device sda: 71131136 512-byte hdwr sectors (36419 MB)
sda: sda1 sda2 sda3 sda4
You can boot RAID2400A boxes probably, too. Give them a try. You can
download them from ftp://ftp.todo.de/pub/Debian/custom-boot/ .
To UNSUBSCRIBE, email to firstname.lastname@example.org
with a subject of "unsubscribe". Trouble? Contact email@example.com