BACK-UPS PRO 650
Hello,
I am using an APC BACK-UPS PRO 650 with the APC Cable 940-0095A. I used
the debian package to install the daemon. The funny is that my server
comunicates with it, it updates the /etc/apcupsd.stats file with the
voltage stuff, but it doesn't shutdown, even when I set a TIMEOUT in
/etc/apcupsd.conf. It looks like it is working perfectly except it
doesn't shutdown.
Here is my /etc/apcupsd.conf file:
## apcupsd.conf v1.0 ##
#
# "apcupsd" POSIX config file
# Updated for Debian/GNU Linux by Leon Breedt (ljb@debian.org)
# CONTROL <string>
CONTROL /usr/sbin/powersc
# UPSCABLE [ simple | smart |
# 940-00(20B,23A,24B,24C,24G,95A,95C) |
# 940-15(24C) |
# ether ]
#
UPSCABLE 940-0095A
# UPSTYPE [ backups | sharebasic | netups |
# backupspro | smartvsups |
# newbackupspro | backupspropnp |
# smartups | matrixups | sharesmart ]
#
UPSTYPE backupspro
# UPSCLASS [ standalone | shareslave | sharemaster | netslave |
netmaster ]
UPSCLASS standalone
# UPSMODE [ disable | share | net | sharenet ]
UPSMODE disable
#DEVICE <string> /dev/<serial port>
DEVICE /dev/ttyS0
#LOCKFILE <path to lockfile>
LOCKFILE /var/lock
#ACCESS <string> [ true | false ] Enable Access Support
ACCESS true
# ANNOY <int> <30> <0> disables
ANNOY 30
# DELAY <int> <60> <0> disables
DELAY 10
# NOLOGON <string> [ disable | timeout | percent | minutes | always ]
NOLOGON timeout
# PROCFS <int> <120> <0> disables <update rate procfs-type of current
status>
PROCFS 10
# LOGGING <int> <500> <0> disables <rate update log file of current
status>
LOGGING 300
# TIMEOUT <time is seconds to run on UPS, powerfails>
TIMEOUT 10
# BATTERYLEVEL <precent of battery charge for shutdown> 10
BATTERYLEVEL 40
# MINUTES <time in minutes of remaining battery charge before shutdown>
5
MINUTES 15
# SENSITIVITY <char> H,M,L default H
SENSITIVITY H
# WAKEUP <int> 0,60,180,300 Cycles default 0
WAKEUP 60
# SLEEP <int> 20,180,300,600 Cycles default 20
SLEEP 20
# LOTRANSFER <int> 0,1,2,3 default 2
LOTRANSFER 2
# HITRANSFER <int> 0,1,2,3 default 2
HITRANSFER 3
# RETURNCHARGE <int> 0,1,2,3 default 3
RETURNCHARGE 1
# BEEPSTATE <char> 0,T,L,N default 0
BEEPSTATE L
# SELFTEST <string> 336,168,ON,OFF default 336
SELFTEST 336
#
# UPSNAME <string>
UPSNAME UPS_IDEN
# REPLACE <string> date format mm/dd/yy
#REPLACE 12/13/93
# BATTCMD <string>
#BATTCMD
# TIMECMD <string>
#TIMECMD
# LOADCMD <string>
#LOADCMD
# LIMITCMD <string>
#LIMITCMD
# PWRCMD <string>
#PWRCMD
# RETCMD <string>
#RETCMD
# REMOTECMD <string>
# HITRANSFER <int> 0,1,2,3 default 2
HITRANSFER 3
# RETURNCHARGE <int> 0,1,2,3 default 3
RETURNCHARGE 1
# BEEPSTATE <char> 0,T,L,N default 0
BEEPSTATE L
# SELFTEST <string> 336,168,ON,OFF default 336
SELFTEST 336
#
# UPSNAME <string>
UPSNAME UPS_IDEN
# REPLACE <string> date format mm/dd/yy
#REPLACE 12/13/93
# BATTCMD <string>
#BATTCMD
# TIMECMD <string>
#TIMECMD
# LOADCMD <string>
#LOADCMD
# LIMITCMD <string>
#LIMITCMD
# PWRCMD <string>
#PWRCMD
# RETCMD <string>
#RETCMD
# REMOTECMD <string>
# PWRCMD <string>
#PWRCMD
# RETCMD <string>
#RETCMD
# REMOTECMD <string>
#REMOTECMD
# NETTIME <int>
#NETTIME 100
# NETPORT <int>
#NETPORT 6666
# MASTER <string>
#MASTER
# SLAVE <string>
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
# USERMAGIC <string>
#USERMAGIC
# HTTPACCESS [ true | false ] enable web-interface - defaults to false
#HTTPACCESS true
# HTTPPORT <port> port to use for interface - defaults to 1999
#HTTP# PWRCMD <string>
#PWRCMD
# RETCMD <string>
#RETCMD
# REMOTECMD <string>
#REMOTECMD
# NETTIME <int>
#NETTIME 100
# NETPORT <int>
#NETPORT 6666
# MASTER <string>
#MASTER
# SLAVE <string>
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
# USERMAGIC <string>
#USERMAGIC
# HTTPACCESS [ true | false ] enable web-interface - defaults to false
#HTTPACCESS true
# HTTPPORT <port> port to use for interface - defaults to 1999
#HTTPPORT 1999PORT 1999
My /etc/apcups.stats says:
APC : Dec 14 14:36:37
CABLE : APC Cable 940-0095A
UPSMODEL : BACK-UPS PRO 650
UPSMODE : Stand Alone
LINEFAIL : OK
BATTSTAT : OK
LINEVOLT : OK
UPSNAME : UPS_IDEN
ULINE : 113.7 Volts
MLINE : 114.4 Volts
NLINE : 113.7 Volts
FLINE : 60.0 Hz
VOUTP : 113.7 Volts
LOUTP : 013.0 Load Capacity
BOUTP : 13.9 Volts
BCHAR : 100.0 Batt. Charge
TIME : 32.0 Minutes
SENSE : HIGH
WAKEUP : 060 Cycles
SLEEP : 020 Cycles
LOTRANS : 100.0 Volts
HITRANS : 136.0 Volts
CHARGE : 015.0 Percent
BFAIL : 0x08 Status Flag
ALARM : Low Batt
LASTEVNT : POWER FAILURE
LOWBATT : 02 Minutes
Thanks
Matt Fair
Reply to: