[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: Harddrive Errors



Joe,
	Thats a really wierd error message for running a raid. Does the controller
come with any software to check the status of the raid?

-----Original Message-----
From: Gregory Wood [mailto:gwood@farsweb.com]
Sent: Tuesday, July 11, 2000 5:48 AM
To: JoeCool; debian-isp@lists.debian.org
Subject: Re: Harddrive Errors


Hello,

I once tried a newer hard drive on an old motherboard. I think the hard
drive was spinning down (power saving) and the motherboard treated it as an
error.

It may just be a bad drive. If that is the case, it will die in the next
couple of days anyway.

Best of luck.


*********** REPLY SEPARATOR  ***********

On 7/10/00 at 11:54 PM JoeCool wrote:

>Hi,
>
>I'm getting some Input/Output error messages and also messages in the
syslog
>on a server about the harddrive.  Anyone have any ideas on whats wrong and
>what I should do?
>
>Is the harddrive bad?  Or do I just need to run fsck ?
>
>
>$ls
>ls: methods: Input/output error
>ls: status: Input/output error
>ls: available: Input/output error
>
>Jul 10 23:28:32 linux kernel: scsi0: MEDIUM ERROR on channel 0, id 13, lun
>0,
>CDB: Read (10) 00 00 2e 21 54 00 00 02 00
>Jul 10 23:28:32 linux kernel: Current error sd08:06: sense key Medium Error
>Jul 10 23:28:32 linux kernel: Additional sense indicates Data
>synchronization
>mark error
>Jul 10 23:28:32 linux kernel: scsidisk I/O error: dev 08:06, sector 147490
>Jul 10 23:28:32 linux kernel: EXT2-fs error (device 08:06):
ext2_read_inode:
>unable to read inode block - inode=18441, block=73745
>
>The errors above also appear when I type dmesg.
>
>The scsi harddrive info is:
>cat /proc/scsi/scsi
>Attached devices:
>Host: scsi0 Channel: 00 Id: 13 Lun: 00
>  Vendor: SEAGATE  Model: ST34501W         Rev: 0018
>  Type:   Direct-Access                    ANSI SCSI revision: 02
>Host: scsi1 Channel: 00 Id: 05 Lun: 00
>  Vendor: NEC      Model: CD-ROM DRIVE:464 Rev: 1.05
>  Type:   CD-ROM                           ANSI SCSI revision: 02
>Host: scsi1 Channel: 00 Id: 06 Lun: 00
>  Vendor: Quantum  Model: DLT4000          Rev: CD50
>  Type:   Sequential-Access                ANSI SCSI revision: 02
>Host: scsi2 Channel: 00 Id: 06 Lun: 00
>  Vendor: DELL     Model: 6UW BACKPLANE    Rev: 7
>  Type:   Processor                        ANSI SCSI revision: 02
>Host: scsi2 Channel: 02 Id: 00 Lun: 00
>  Vendor: MegaRAID Model: LD0 RAID5 25704R Rev: U.75
>  Type:   Direct-Access                    ANSI SCSI revision: 02
>
>
>Thanks for any help.
>
>-Joe
>
>
>--
>To UNSUBSCRIBE, email to debian-isp-request@lists.debian.org
>with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org




--
To UNSUBSCRIBE, email to debian-isp-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org



Reply to: