Potato and Modem
Hi!
You could try connecting at a lower speed, say 56K or 38K and see if this
works.
Rob...
>
>
> Hello
>
> I have probem with Potato and modem. I had Slink and everything was
great.
>Then I made upgrade to Potato and my modem dont work. Problem is after
connect.
>Under minicom everything seems to be ok, I can send AT command and I have
>response. But when I am tring to connect I recive trash. On the screen is
>Connect and speed and then strange signs, there should be login prompt
from the
>Unix machine. When I reboot to windows on the same machine and teh same
modem
>everything is ok I can connect. Answering modem is US Robotisc Flash and
>dialing modem is US Rbotics K56. I tried with Lucent MAX 6000 but it was
>the same under win works, under Potado dont.
>
> So there is no hardware problem I think that setserial set samthing
strange
>
>hades:~# setserial -a /dev/ttyS0
>/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
> Baud_base: 115200, close_delay: 50, divisor: 0
> closing_wait: 3000
> Flags: spd_vhi skip_test
>
>I swithed setserial from slink but it wasen it.
>
>I tested under 2.2.14 2.3.48 2.2.13 self made and from the debian install
>
>Linux hades 2.2.14 #1 Wed Mar 22 17:54:03 EST 2000 i686 unknown
>
>
> What is wrong, do you have the same probelm ?
>
> Please help.
>
>
>-----------------------------
> Marcin "user" Jakubowski
> user@szczecin.top.pl
>
>
>
>--
>To UNSUBSCRIBE, email to debian-isp-request@lists.debian.org
>with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
>
Reply to: