a new one
now check this out
i have rawdvd running on the computer1
and i have also radvd there running
eth0 radvd ipv6computer1
interface eth0
{
AdvSendAdvert on;
#prefix 2001:db8::/32
prefix fd27:2b14:2baf::/64
{
};
};
eth0--ipv6computer1
Link encap:Ethernet HWaddr 00:11:11:55:F7:13
inet addr:10.30.143.2 Bcast:10.30.143.255 Mask:255.255.255.0
inet6 addr: fe80::211:11ff:fe55:f713/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:129532 errors:0 dropped:0 overruns:0 frame:0
TX packets:111501 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:15437512 (14.7 MiB) TX bytes:25867775 (24.6 MiB)
Interrupt:20 Base address:0xdc00 Memory:ff8ff000-ff8ff038
ipv6-computer2
simpson:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:01:80:09:6A:3F
inet addr:10.30.142.1 Bcast:10.30.142.255 Mask:255.255.255.0
inet6 addr: fd27:2b14:2baf:0:201:80ff:fe09:6a3f/64 Scope:Global
sings like the radvd configuration is working ok but now why from
computer1 i cannot access to computer2?
i mean to the ipv6 addres fd27:2b14:2baf:0:201:80ff:fe09:6a3f
inet6 addr: fe80::201:80ff:fe09:6a3f/64 Scope:Link
-------------------------------------------------
Luis A. Rondon Paz
L I N U X .~. Admin intranet CNT
The Choice /V\ icq #132736035
of a GNU /( )\ itachi@cnt.uo.edu.cu
Generation ^^-^^ Santiago de cuba
UONET
###########
###############
#### ####
- ,$$P' ###
- ',$$P ,-*** ###
- `d$$' ,## * ###
- $$P ## * ###
- $$: ## - ###
- $$; ### ###
- Y$$. ` #######
- `$$b "-.__
- `Y$$b
- `Y$$.
- `$$b.
- `Y$$b.
- `"Y$b._
-------------------------------------------------
Reply to: