Re: Example configuration
hey pple at this time i finally (i think) i made my two ipv6 computers c each
at moment icmp work okok
check this out
pc debian#1 with ipv4-6
debhelper:/# ping6 -Ieth0 -c3 fe80::20c:29ff:fe44:e718
PING fe80::20c:29ff:fe44:e718(fe80::20c:29ff:fe44:e718) from
fe80::20c:29ff:fec2:f77d et
h0: 56 data bytes
64 bytes from fe80::20c:29ff:fe44:e718: icmp_seq=1 ttl=64 time=1.23 ms
64 bytes from fe80::20c:29ff:fe44:e718: icmp_seq=2 ttl=64 time=1.13 ms
64 bytes from fe80::20c:29ff:fe44:e718: icmp_seq=3 ttl=64 time=0.844 ms
--- fe80::20c:29ff:fe44:e718 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2025ms
rtt min/avg/max/mdev = 0.844/1.071/1.238/0.170 ms
pc2 debian#2 with ipv4-6
ruter-deb:~# ping6 -I eth0 -c2 fe80::20c:29ff:fec2:f77d
PING fe80::20c:29ff:fec2:f77d(fe80::20c:29ff:fec2:f77d)
from fe80::20c:29ff:fe44:e718 eth0: 56 data bytes
64 bytes from fe80::20c:29ff:fec2:f77d: icmp_seq=1 ttl=64 time=22.2 ms
64 bytes from fe80::20c:29ff:fec2:f77d: icmp_seq=2 ttl=64 time=1.55 ms
--- fe80::20c:29ff:fec2:f77d ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1007ms
rtt min/avg/max/mdev = 1.552/11.918/22.285/10.367 ms
what is next step ?
example telnet ssh to an ipv6 addres
ssh guestn@fe80::20c:29ff:fec2:f77d
thanks
-------------------------------------------------
Luis A. Rondon Paz
L I N U X .~. Admin intranet CNT
The Choice /V\ icq #132736035
of a GNU /( )\ itachi@cnt.uo.edu.cu
Generation ^^-^^ Santiago de cuba
UONET
###########
###############
#### ####
- ,$$P' ###
- ',$$P ,-*** ###
- `d$$' ,## * ###
- $$P ## * ###
- $$: ## - ###
- $$; ### ###
- Y$$. ` #######
- `$$b "-.__
- `Y$$b
- `Y$$.
- `$$b.
- `Y$$b.
- `"Y$b._
-------------------------------------------------
Reply to: