Re: multiple v6 address config
On Sun, 6 Jun 2004, Peter Good wrote:
> FYI, I can ping all those addresses fine from here.
>
> Try ping6 pontius.home.ipv6.net.au and see what result you get.
[dick@outkast dick]$ ping6 pontius.home.ipv6.net.au
PING pontius.home.ipv6.net.au(2001:db0:1002:0:20d:61ff:fe1c:4ec0) 56 data bytes
64 bytes from 2001:db0:1002:0:20d:61ff:fe1c:4ec0: icmp_seq=1 ttl=53 time=367 ms
64 bytes from 2001:db0:1002:0:20d:61ff:fe1c:4ec0: icmp_seq=2 ttl=53 time=365 ms
64 bytes from 2001:db0:1002:0:20d:61ff:fe1c:4ec0: icmp_seq=3 ttl=53 time=369 ms
????
I've been trying to get this to work for over a week.
And now, without changing *anything*, it suddenly works....
The only conclusion is that one of my ISP techies is on this list
and quickly fixed something along the way :-)
So now it works.
When I ssh from my box to some remote box, I see that my source address is
the 'highest' v6 address on my box (2001:898:2000:1b::5).
Is there any why to set the source address for outbound connections?
--
* *** Dick Visser TIENHUIS Networking
** * * Marco Polostraat 234-3 P: +31206843731
* * *** 1056 DP Amsterdam F: +31208641420
* * * * The Netherlands M: +31622698108
* ** * WWW: http://www.tienhuis.nl
* * * Email: d.n.m.visser@tienhuis.nl
* * * IP Phone: sip:dick@tienhuis.nl
*** *** PGP-key: http://www.tienhuis.nl/gpg.txt
Live webcam (WM9): http://www.terena.nl/~dick/cam2.asx
Reply to: