Re: [PATCH] module: fix module load for ia64
On Sun, 2023-05-28 at 16:00 -0700, Song Liu wrote:
> Frank reported boot regression in ia64 as:
>
> ELILO v3.16 for EFI/IA-64
> ..
> Uncompressing Linux... done
> Loading file AC100221.initrd.img...done
> [ 0.000000] Linux version 6.4.0-rc3 (root@x4270) (ia64-linux-gcc
> (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Thu May 25 15:52:20
> CEST 2023
> [ 0.000000] efi: EFI v1.1 by HP
> [ 0.000000] efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fe2a000
> ESI=0x3ee7b000 SMBIOS=0x3ee7c000 HCDP=0x3fe28000
> [ 0.000000] PCDP: v3 at 0x3fe28000
> [ 0.000000] earlycon: uart8250 at MMIO 0x00000000f4050000 (options
> '9600n8')
> [ 0.000000] printk: bootconsole [uart8250] enabled
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x000000003FE2A000 000028 (v02 HP )
> [ 0.000000] ACPI: XSDT 0x000000003FE2A02C 0000CC (v01 HP rx2620
> 00000000 HP 00000000)
> [...]
> [ 3.793350] Run /init as init process
> Loading, please wait...
> Starting systemd-udevd version 252.6-1
> [ 3.951100] ------------[ cut here ]------------
> [ 3.951100] WARNING: CPU: 6 PID: 140 at kernel/module/main.c:1547
> __layout_sections+0x370/0x3c0
> [ 3.949512] Unable to handle kernel paging request at virtual address
> 1000000000000000
> [ 3.951100] Modules linked in:
> [ 3.951100] CPU: 6 PID: 140 Comm: (udev-worker) Not tainted 6.4.0-rc3 #1
> [ 3.956161] (udev-worker)[142]: Oops 11003706212352 [1]
> [ 3.951774] Hardware name: hp server rx2620 , BIOS
> 04.29
> 11/30/2007
> [ 3.951774]
> [ 3.951774] Call Trace:
> [ 3.958339] Unable to handle kernel paging request at virtual address
> 1000000000000000
> [ 3.956161] Modules linked in:
> [ 3.951774] [<a0000001000156d0>] show_stack.part.0+0x30/0x60
> [ 3.951774] sp=e000000183a67b20
> bsp=e000000183a61628
> [ 3.956161]
> [ 3.956161]
>
> which bisect to module_memory change [1].
>
> Debug showed that ia64 uses some special sections:
>
> __layout_sections: section .got (sh_flags 10000002) matched to MOD_INVALID
> __layout_sections: section .sdata (sh_flags 10000003) matched to MOD_INVALID
> __layout_sections: section .sbss (sh_flags 10000003) matched to MOD_INVALID
>
> All these sections are loaded to module core memory before [1].
>
> Fix ia64 boot by loading these sections to MOD_DATA (core rw data).
>
> [1] commit ac3b43283923 ("module: replace module_layout with module_memory")
>
> Fixes: ac3b43283923 ("module: replace module_layout with module_memory")
> Reported-by: Frank Scheiner <frank.scheiner@web.de>
> Closes: https://lists.debian.org/debian-ia64/2023/05/msg00010.html
> Closes: https://marc.info/?l=linux-ia64&m=168509859125505
> Cc: Linus Torvalds <torvalds@linux-foundation.org>
> Signed-off-by: Song Liu <song@kernel.org>
> ---
> kernel/module/main.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/kernel/module/main.c b/kernel/module/main.c
> index b4c7e925fdb0..9da4b551321e 100644
> --- a/kernel/module/main.c
> +++ b/kernel/module/main.c
> @@ -1521,14 +1521,14 @@ static void __layout_sections(struct module *mod, struct load_info *info, bool i
> MOD_RODATA,
> MOD_RO_AFTER_INIT,
> MOD_DATA,
> - MOD_INVALID, /* This is needed to match the masks array */
> + MOD_DATA,
> };
> static const int init_m_to_mem_type[] = {
> MOD_INIT_TEXT,
> MOD_INIT_RODATA,
> MOD_INVALID,
> MOD_INIT_DATA,
> - MOD_INVALID, /* This is needed to match the masks array */
> + MOD_INIT_DATA,
> };
>
> for (m = 0; m < ARRAY_SIZE(masks); ++m) {
I can confirm that this fixes module loading on my RX2660 with 6.4-rc4.
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
Reply to: