[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: SGI ALTIX 450 Debian Wheezy

If you guys can get squeeze working and try a newer kernel (everything else the same), that might help others figure out what caused the problem. At this point, I wouldn't rule out gcc either, but I'm pessimistic ;) Honestly, I'd try a 3.11 series, or perhaps the latest git kernel, to see if any regressions were fixed, and if not, start at squeeze's version and move up. You guys needed a good stress test for those CPUs, right? =D


On Fri, Oct 11, 2013 at 4:42 AM, Laurent RENAULT <lirtyx@gmail.com> wrote:
Le 10/10/2013 16:28, Patrick Baggett a écrit :
As far as I know, nobody has figured out why squeeze works but wheezy doesn't.
I have an altix 450 too and I have the same problem. It will be incredible if Jessie works on it !


On Thu, Oct 10, 2013 at 9:13 AM, Elias Estay <eestay@utalca.cl> wrote:
has succesful  Somebody install debian Wheezy (ia64) in the SGI altix 450 ?,

I tried Install directly from the cd but don't load (Appears Pod sysct cac >).

 I can install squezze with no problem but if I do a upgrade to wheezy  the system don't boot and it only see the "udevd[185]: unable to receive ctrl connection: Function not implemented" error.

The l1 firmware is
1.46.8 (Image A), Built 12/06/2006 11:05:50   [Linux L1 image]



Elias  Estay Cerda
Administrador de Sistemas
Escuela de Ingeniería en Bioinformática
Facultad de Ingeniería, Universidad de Talca
Teléfono: 071-2418857

To UNSUBSCRIBE, email to debian-ia64-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: [🔎] 5256B619.8000406@utalca.cl" target="_blank">http://lists.debian.org/[🔎] 5256B619.8000406@utalca.cl

Reply to: