R: Apt-get dist-upgrade squeeze->wheezy
Hi,
I tried to boot gentoo install-ia64-minimal-20121002.iso
It uses 3.3.8-gentoo and it boots almost correctly (didn't get login prompt and waiting a lot on acpi staff)
So I think there's something different between configs.
Do you have an idea ? Can you help me ?
Fabio
Loading.: Internal Bootable DVD
Starting: Internal Bootable DVD
Welcome to the Gentoo/IA64 LiveCD!
To boot the CD with default options type 'gentoo' or hit the Enter key.
To boot, forcing a serial console on ttyS0 at 9600bps type 'gentoo-serial'.
To boot, if you're using iLO remote console, type 'gentoo-ilo', which
forces a serial console on ttyS3 at 9600bps.
To boot, if you're using an SGI system, type 'gentoo-sgi', which
forces a serial console on ttySG0 at 115200bps.
You may add extra arguments to either to modify the boot options.
Please report any issues to <ia64@gentoo.org>!
For further information on Gentoo/IA64 installation please see the
IA64 installation handbook.
ELILO boot: Uncompressing Linux... done
Loading file \efi\boot\gentoo.igz...done
Linux version 3.3.8-gentoo (root@dolphin) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.6, pie-0.4.7) ) #1 SMP Wed Oct 3 04:40:00 UTC 2012
EFI v1.10 by HP: SALsystab=0x3e528000 ACPI 2.0=0x3fe22000 SMBIOS=0x3e52a000 HCDP=0x3fe20000
booting generic kernel on platform hpzx1
PCDP: v3 at 0x3fe20000
Early serial console at MMIO 0x84053000 (options '9600n8')
bootconsole [uart8250] enabled
ACPI: RSDP 000000003fe22000 00028 (v02 HP)
ACPI: XSDT 000000003fe2202c 00094 (v01 HP rx4640 00000000 HP 00000000)
ACPI: FACP 000000003fe36cd8 000F4 (v03 HP rx4640 00000000 HP 00000000)
ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20120111/tbfadt-548)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20120111/tbfadt-548)
ACPI: DSDT 000000003fe221c8 0D0F5 (v01 HP rx4640 00000007 INTL 20050309)
ACPI: FACS 000000003fe36dd0 00040
ACPI: SPCR 000000003fe36e10 00050 (v01 HP rx4640 00000000 HP 00000000)
ACPI: DBGP 000000003fe36e60 00034 (v01 HP rx4640 00000000 HP 00000000)
ACPI: APIC 000000003fe37080 000B0 (v01 HP rx4640 00000000 HP 00000000)
ACPI: SPMI 000000003fe36e98 00050 (v04 HP rx4640 00000000 HP 00000000)
ACPI: CPEP 000000003fe36f50 00034 (v01 HP rx4640 00000000 HP 00000000)
ACPI: SSDT 000000003fe2f2c8 001A7 (v01 HP rx4640 00000006 INTL 20050309)
ACPI: SSDT 000000003fe2f478 00F65 (v01 HP rx4640 00000006 INTL 20050309)
ACPI: SSDT 000000003fe303e8 011CD (v01 HP rx4640 00000006 INTL 20050309)
ACPI: SSDT 000000003fe315b8 021B5 (v01 HP rx4640 00000006 INTL 20050309)
ACPI: SSDT 000000003fe33778 021B5 (v01 HP rx4640 00000006 INTL 20050309)
ACPI: SSDT 000000003fe35938 011CD (v01 HP rx4640 00000006 INTL 20050309)
ACPI: SSDT 000000003fe36b08 000DC (v01 HP rx4640 00000006 INTL 20050309)
ACPI: SSDT 000000003fe36be8 000E0 (v01 HP rx4640 00000006 INTL 20050309)
ACPI: Local APIC address c0000000fee00000
2 CPUs available, 2 CPUs total
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Initial ramdisk at: 0xe0000040fe8c1000 (7111052 bytes)
SAL 3.1: HP version 4.28
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
MCA related initialization done
Virtual mem_map starts at 0xa0007fffc7200000
Zone PFN ranges:
DMA 0x00000400 -> 0x00040000
Normal 0x00040000 -> 0x01040000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000400 -> 0x0000f7c9
0: 0x0000f88f -> 0x0000f94a
0: 0x0000ff00 -> 0x0000ff88
0: 0x01010000 -> 0x0103fbff
0: 0x0103fc00 -> 0x0103fef6
0: 0x0103ff1f -> 0x0103ff80
0: 0x0103ffa0 -> 0x0103fff8
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 201021
Policy zone: Normal
Kernel command line: BOOT_IMAGE=atapi0:/efi/boot/gentoo initrd=gentoo.igz root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot
PID hash table entries: 4096 (order: 1, 32768 bytes)
Memory: 4095648k/4119584k available (13370k code, 52480k reserved, 6165k data, 1152k init)
Hierarchical RCU implementation.
NR_IRQS:1024
ACPI: Local APIC address c0000000fee00000
GSI 20 (level, low) -> CPU 0 (0x0000) vector 49
Console: colour VGA+ 80x25
Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
Mount-cache hash table entries: 1024
ACPI: Core revision 20120111
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff -32 cycles, maxerr 718 cycles)
Brought up 2 CPUs
Total of 2 processors activated (4780.03 BogoMIPS).
DMI 2.3 present.
NET: Registered protocol family 16
ACPI: bus type pci registered
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOSAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [L000] (domain 0000 [bus 00-1f])
pci_root HWP0002:00: host bridge window [io 0x0000-0x1fff]
pci_root HWP0002:00: host bridge window [mem 0x000a0000-0x000fffff]
pci_root HWP0002:00: host bridge window [mem 0x80000000-0x8fffffff]
pci_root HWP0002:00: host bridge window [mem 0x80004000000-0x80103fffffe]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x1fff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff]
pci_bus 0000:00: root bus resource [mem 0x80004000000-0x80103fffffe]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
ACPI: PCI Root Bridge [L001] (domain 0000 [bus 20-3f])
pci_root HWP0002:01: host bridge window [io 0x2000-0x3fff]
pci_root HWP0002:01: host bridge window [mem 0x90000000-0x9fffffff]
pci_root HWP0002:01: host bridge window [mem 0x90004000000-0x90103fffffe]
PCI host bridge to bus 0000:20
pci_bus 0000:20: root bus resource [io 0x2000-0x3fff]
pci_bus 0000:20: root bus resource [mem 0x90000000-0x9fffffff]
pci_bus 0000:20: root bus resource [mem 0x90004000000-0x90103fffffe]
pci0000:20: Unable to request _OSC control (_OSC support mask: 0x19)
ACPI: PCI Root Bridge [L002] (domain 0000 [bus 40-7f])
pci_root HWP0002:02: host bridge window [io 0x4000-0x7fff]
pci_root HWP0002:02: host bridge window [mem 0xa0000000-0xbfffffff]
pci_root HWP0002:02: host bridge window [mem 0xa0004000000-0xa0103fffffe]
PCI host bridge to bus 0000:40
pci_bus 0000:40: root bus resource [io 0x4000-0x7fff]
pci_bus 0000:40: root bus resource [mem 0xa0000000-0xbfffffff]
pci_bus 0000:40: root bus resource [mem 0xa0004000000-0xa0103fffffe]
pci0000:40: Unable to request _OSC control (_OSC support mask: 0x19)
ACPI: PCI Root Bridge [L004] (domain 0000 [bus 80-9f])
pci_root HWP0002:03: host bridge window [io 0x8000-0x9fff]
pci_root HWP0002:03: host bridge window [mem 0xc0000000-0xcfffffff]
pci_root HWP0002:03: host bridge window [mem 0xc0004000000-0xc0103fffffe]
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io 0x8000-0x9fff]
pci_bus 0000:80: root bus resource [mem 0xc0000000-0xcfffffff]
pci_bus 0000:80: root bus resource [mem 0xc0004000000-0xc0103fffffe]
pci0000:80: Unable to request _OSC control (_OSC support mask: 0x19)
ACPI: PCI Root Bridge [L005] (domain 0000 [bus a0-bf])
pci_root HWP0002:04: host bridge window [io 0xa000-0xbfff]
pci_root HWP0002:04: host bridge window [mem 0xd0000000-0xdfffffff]
pci_root HWP0002:04: host bridge window [mem 0xd0004000000-0xd0103fffffe]
PCI host bridge to bus 0000:a0
pci_bus 0000:a0: root bus resource [io 0xa000-0xbfff]
pci_bus 0000:a0: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:a0: root bus resource [mem 0xd0004000000-0xd0103fffffe]
pci0000:a0: Unable to request _OSC control (_OSC support mask: 0x19)
ACPI: PCI Root Bridge [L006] (domain 0000 [bus c0-ff])
pci_root HWP0002:05: host bridge window [io 0xc000-0xffff]
pci_root HWP0002:05: host bridge window [mem 0xe0000000-0xfdffffff]
pci_root HWP0002:05: host bridge window [mem 0xe0004000000-0xe0103fffffe]
PCI host bridge to bus 0000:c0
pci_bus 0000:c0: root bus resource [io 0xc000-0xffff]
pci_bus 0000:c0: root bus resource [mem 0xe0000000-0xfdffffff]
pci_bus 0000:c0: root bus resource [mem 0xe0004000000-0xe0103fffffe]
pci0000:c0: Unable to request _OSC control (_OSC support mask: 0x19)
vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:04.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
Switching to clocksource itc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 2, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes)
NET: Registered protocol family 1
GSI 17 (level, low) -> CPU 1 (0x0100) vector 50
GSI 17 (level, low) -> CPU 1 (0x0100) vector 50 unregistered
GSI 18 (level, low) -> CPU 0 (0x0000) vector 50
GSI 18 (level, low) -> CPU 0 (0x0000) vector 50 unregistered
GSI 23 (level, low) -> CPU 1 (0x0100) vector 50
GSI 23 (level, low) -> CPU 1 (0x0100) vector 50 unregistered
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6928kB freed
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
HugeTLB registered 256 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 8012
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
sn_pci_hotplug_init: PROM version does not support hotplug.
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [7] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [8] registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
GSI 16 (level, low) -> CPU 0 (0x0000) vector 50
0000:00:01.1: ttyS1 at MMIO 0x84053000 (irq = 53) is a 16550A
console [ttyS1] enabled, bootconsole disabled
console [ttyS1] enabled, bootconsole disabled
0000:00:01.1: ttyS2 at MMIO 0x84053010 (irq = 53) is a 16550A
0000:00:01.1: ttyS3 at MMIO 0x84053038 (irq = 53) is a 16550A
EFI Time Services Driver v0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (27 C)
brd: module loaded
loop: module loaded
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
GSI 71 (level, low) -> CPU 1 (0x0100) vector 51
sym0: <1010-66> rev 0x1 at pci 0000:c0:01.0 irq 54
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
scsi target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
scsi 0:0:0:0: Direct-Access COMPAQ BF07285A36 HPB6 PQ: 0 ANSI: 3
scsi target0:0:0: tagged command queuing enabled, command queue depth 16.
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
scsi target0:0:0: Ending Domain Validation
scsi 0:0:1:0: Direct-Access COMPAQ BF072863BA HPB6 PQ: 0 ANSI: 3
scsi target0:0:1: tagged command queuing enabled, command queue depth 16.
scsi target0:0:1: Beginning Domain Validation
scsi target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
scsi target0:0:1: Ending Domain Validation
scsi 0:0:2:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0 ANSI: 3
scsi target0:0:2: tagged command queuing enabled, command queue depth 16.
scsi target0:0:2: Beginning Domain Validation
scsi target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
scsi target0:0:2: Ending Domain Validation
scsi 0:0:3:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0 ANSI: 3
scsi target0:0:3: tagged command queuing enabled, command queue depth 16.
scsi target0:0:3: Beginning Domain Validation
scsi target0:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
scsi target0:0:3: Ending Domain Validation
scsi 0:0:15:0: Processor COMPAQ PROLIANT 7L7E*DB 2.30 PQ: 0 ANSI: 2
scsi target0:0:15: Beginning Domain Validation
scsi target0:0:15: Ending Domain Validation
sd 0:0:1:0: [sdb] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
sd 0:0:0:0: [sda] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
sd 0:0:2:0: [sdc] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:3:0: [sdd] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:3:0: [sdd] Write Protect is off
sda: unknown partition table
sdb: unknown partition table
sd 0:0:2:0: Attached scsi generic sg2 type 0
sd 0:0:3:0: Attached scsi generic sg3 type 0
scsi 0:0:15:0: Attached scsi generic sg4 type 3
GSI 21 (level, low) -> CPU 0 (0x0000) vector 52
pata_cmd64x 0000:00:03.0: Secondary port is disabled
scsi1 : pata_cmd64x
scsi2 : pata_cmd64x
ata1: PATA max UDMA/100 cmd 0xe18 ctl 0xe24 bmdma 0xe00 irq 55
ata2: DUMMY
bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.35-0 (2011/11/10)
enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.31
e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
igb: Copyright (c) 2007-2012 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k
ixgbe: Copyright (c) 1999-2012 Intel Corporation.
Solarflare NET driver v3.1
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
GSI 27 (level, low) -> CPU 1 (0x0100) vector 53
mptbase: ioc0: Initiating bringup
sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: unknown partition table
sd 0:0:2:0: [sdc] Attached SCSI disk
sdd: unknown partition table
sd 0:0:3:0: [sdd] Attached SCSI disk
ata1.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.20, max MWDMA2
ata1.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.20 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi generic sg5 type 5
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi3 : ioc0: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=56
scsi 3:0:1:0: Direct-Access HP 73.4G MAS3735NC HPC4 PQ: 0 ANSI: 3
scsi target3:0:1: Beginning Domain Validation
scsi target3:0:1: Ending Domain Validation
scsi target3:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP (6.25 ns, offset 127)
sd 3:0:1:0: Attached scsi generic sg6 type 0
sd 3:0:1:0: [sde] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 3:0:1:0: [sde] Write Protect is off
sd 3:0:1:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
GSI 28 (level, low) -> CPU 0 (0x0000) vector 54
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi4 : ioc1: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=57
scsi 4:0:0:0: Direct-Access HP 73.4G MAS3735NC HPC4 PQ: 0 ANSI: 3
scsi target4:0:0: Beginning Domain Validation
sde: sde1 sde2 sde3 sde4 sde5
scsi target4:0:0: Ending Domain Validation
scsi target4:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP (6.25 ns, offset 127)
sd 4:0:0:0: Attached scsi generic sg7 type 0
sd 4:0:0:0: [sdf] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 3:0:1:0: [sde] Attached SCSI disk
sd 4:0:0:0: [sdf] Write Protect is off
sd 4:0:0:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
GSI 23 (level, low) -> CPU 1 (0x0100) vector 55
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
sdf: sdf1 sdf2 sdf3 sdf4
ehci_hcd 0000:00:02.2: irq 52, io mem 0x84050000
sd 4:0:0:0: [sdf] Attached SCSI disk
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 0.95
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
GSI 17 (level, low) -> CPU 0 (0x0000) vector 56
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 50, io mem 0x84052000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
GSI 18 (level, low) -> CPU 1 (0x0100) vector 57
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 51, io mem 0x84051000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
mousedev: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Freeing unused kernel memory: 1152kB freed
>> Loading modules
:: Scanning for cciss...cciss loaded.
:: Scanning for qla2xxx...qla2xxx loaded.
:: Scanning for lpfc...lpfc loaded.
:: Scanning for usb-storage...usb-storage loaded.
:: Scanning for scsi_wait_scan...scsi_wait_scan loaded.
:: Scanning for dm-mirror...dm-log, dm-region-hash, dm-mirror loaded.
:: Scanning for dm-snapshot...dm-snapshot loaded.
:: Scanning for raid0...raid0 loaded.
:: Scanning for raid1...raid1 loaded.
:: Scanning for raid456...async_tx, xor, async_xor, raid6_pq, async_pq, async_memcpy, async_raid6_recov, raid456 loaded.
:: Scanning for raid10...raid10 loaded.
:: Scanning for nfs...sunrpc, lockd, nfs loaded.
:: Scanning for fuse...fuse loaded.
:: Scanning for e1000...e1000 loaded.
:: Scanning for tg3...libphy, tg3 loaded.
>> Activating mdev
>> Loading keymaps
Please select a keymap from the following list by typing in the appropriate
name or number. Hit Enter for the default "us/41" US English keymap.
1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf
2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq
3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua
4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk
5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us
6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe
<< Load keymap (Enter for default):
>> Keeping default keymap
>> Making tmpfs for /newroot
>> Looking for the cdrom
>> Attempting to mount media:- /dev/sr0
>> Media found on /dev/sr0
>> Determining root device...
>> Determining looptype ...
>> Mounting squashfs filesystem
>> Copying read-write image contents to tmpfs
>> No cdupdate.sh script found, skipping...
>> Booting (initramfs)..
INIT: version 2.88 booting
OpenRC 0.9.8.4 is starting up Gentoo Linux (ia64)
* /proc is already mounted, skipping
* WARNING: rc_sys not defined in rc.conf. Falling back to automatic detection
* Caching service dependencies ...
Service `unmute' needs non existent service `alsasound'
[ ok ]
* Mounting debug filesystem ...
[ ok ]
* /dev is already mounted
* Starting udev ...
[ ok ]
* Populating /dev with existing devices through uevents ...
[ ok ]
* Waiting for uevents to be processed ...
[ ok ]
* Mounting /dev/shm ...
[ ok ]
* Setting system clock using the hardware clock [UTC] ...
[ ok ]
* Autoloaded 0 module(s)
* Starting up RAID devices ...
mdadm: No arrays found in config file or automatically
[ !! ]
[ ok ]
* Checking local filesystems ...
[ ok ]
* Updating /etc/mtab ...
[ ok ]
* Mounting local filesystems ...
[ ok ]
* Configuring kernel parameters ...
[ ok ]
mkdir: cannot create directory '/var/run': File exists
* failed to create needed directory /var/run
[ !! ]
* ERROR: bootmisc failed to start
* Setting hostname to livecd ...
[ ok ]
* Setting terminal encoding [UTF-8] ...
[ ok ]
* Setting keyboard mode [UTF-8] ...
[ ok ]
* Loading key mappings [us] ...
[ ok ]
* Bringing up interface lo
* Caching network module dependencies
* 127.0.0.1/8 ...
[ ok ]
* Adding routes
* 127.0.0.0/8 via 127.0.0.1 ...
[ ok ]
* Mounting USB device filesystem [usbfs] ...
[ ok ]
* Mounting misc binary format filesystem ...
[ ok ]
* Loading custom binary format handlers ...
[ ok ]
* Activating swap devices ...
[ ok ]
INIT: Entering runlevel: 3
* Checking for firmware to unpack ...
* Unpacking firmware ...
[ ok ]
[ ok ]
* Starting hwsetup ...
[ ok ]
mkdir: cannot create directory '/var/run': File exists
* failed to create needed directory /var/run
[ !! ]
* ERROR: bootmisc failed to start
* Starting syslog-ng ...
Error creating persistent state file; filename='/var/lib/misc/syslog-ng.persist-', error='No such file or directory (2)'
* start-stop-daemon: failed to start `/usr/sbin/syslog-ng'
* Failed to start syslog-ng
[ !! ]
* ERROR: syslog-ng failed to start
* Starting acpid ...
acpid: can't open socket /var/run/acpid.socket: No such file or directory
* Failed to start acpid
[ !! ]
* ERROR: acpid failed to start
* ERROR: unmute needs service(s) alsasound
* Mouse is Device 05f3:0203 at /dev/input/mice ...
* Caching service dependencies ...
Service `unmute' needs non existent service `alsasound'
[ ok ]
* Starting gpm ...
[ ok ]
* Starting rpcbind ...
[ !! ]
* ERROR: rpcbind failed to start
* ERROR: cannot start rpc.statd as rpcbind would not start
* ERROR: cannot start nfsmount as rpcbind would not start
* Auto-scrambling root password for security ...
[ ok ]
* ERROR: cannot start autoconfig as acpid would not start
* Adjusting inittab ...
[ ok ]
* Mounting network filesystems ...
[ ok ]
* Doing udev cleanups
* Starting local
[ ok ]
Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle persone indicate. La diffusione, copia o qualsiasi altra azione derivante dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora abbiate ricevuto questo documento per errore siete cortesemente pregati di darne immediata comunicazione al mittente e di provvedere alla sua distruzione, Grazie.
This e-mail and any attachments is confidential and may contain privileged information intended for the addressee(s) only. Dissemination, copying, printing or use by anybody else is unauthorised. If you are not the intended recipient, please delete this message and any attachments and advise the sender by return e-mail, Thanks.
Reply to: