R: Apt-get dist-upgrade squeeze->wheezy
>From rescue shell I'm trying to compile latest vanilla kernel (http://www.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git) and I get:
bettoni@integrity:~/linux$ make menuconfig
HOSTCC scripts/basic/fixdep
scripts/basic/fixdep.c:106:23: fatal error: sys/types.h: File o directory non esistente
compilation terminated.
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
/usr/include/sys directory is missing.
How can I fix it ?
Fabio
-----Messaggio originale-----
Da: Bettoni Fabio
Inviato: giovedì 11 ottobre 2012 16.50
A: 'Émeric Maschino'
Cc: 'debian-ia64@lists.debian.org'
Oggetto: R: Apt-get dist-upgrade squeeze->wheezy
Hi
Now I get the following to recreate 2.6.32-5-mckinley initrd
# /usr/sbin/update-initramfs -u -k 2.6.32-5-mckinley
update-initramfs: Generating /boot/initrd.img-2.6.32-5-mckinley
WARNING: could not open /var/tmp/mkinitramfs_vMbKNO/lib/modules/2.6.32-5-mckinley/modules.builtin: No such file or directory
-----Messaggio originale-----
Da: Bettoni Fabio [mailto:fabio.bettoni@telecomitalia.it]
Inviato: giovedì 11 ottobre 2012 16.27
A: 'Émeric Maschino'
Cc: 'debian-ia64@lists.debian.org'
Oggetto: R: Apt-get dist-upgrade squeeze->wheezy
Hi,
Sorry for delay...
I don't know where to download 3.3.8 kernel config file used by gentoo installer kernel
The current squeeze->wheezy system does not boot (only with squeeze rescue CD/netboot)
I downgraded to the following squeeze packages (downloading packages and installing with dpkg):
initramfs-tools_0.98.8_all.deb
udev_164-3_ia64.deb
libudev0_164-3_ia64.deb
But it's not generating initrd, with errors I sent on past message.
I would like to have the wheezy system working booting 2.6.32 squeeze kernel.
So I will be able to compile 3.2 kernels with different configs to check what's wrong with debian one.
Fabio
-----Messaggio originale-----
Da: Émeric Maschino [mailto:emeric.maschino@gmail.com]
Inviato: sabato 6 ottobre 2012 19.50
A: Bettoni Fabio
Cc: debian-ia64@lists.debian.org
Oggetto: Re: Apt-get dist-upgrade squeeze->wheezy
Well,
I don't understand what's going wrong with your system.
I can confirm that both 3.3.8-gentoo and current Squeeze kernels are booting fine on my zx6000.
Did you try to rebuild Squeeze kernel using 3.3.8-gentoo .config file?
Emeric
2012/10/4 Bettoni Fabio <fabio.bettoni@telecomitalia.it>:
>
> Hi,
>
> I tried to boot gentoo install-ia64-minimal-20121002.iso
>
> It uses 3.3.8-gentoo and it boots almost correctly (didn't get login
> prompt and waiting a lot on acpi staff)
>
> So I think there's something different between configs.
>
> Do you have an idea ? Can you help me ?
>
> Fabio
>
>
> Loading.: Internal Bootable DVD
> Starting: Internal Bootable DVD
>
> Welcome to the Gentoo/IA64 LiveCD!
>
> To boot the CD with default options type 'gentoo' or hit the Enter key.
> To boot, forcing a serial console on ttyS0 at 9600bps type 'gentoo-serial'.
> To boot, if you're using iLO remote console, type 'gentoo-ilo', which
> forces a serial console on ttyS3 at 9600bps.
> To boot, if you're using an SGI system, type 'gentoo-sgi', which
> forces a serial console on ttySG0 at 115200bps.
>
> You may add extra arguments to either to modify the boot options.
>
> Please report any issues to <ia64@gentoo.org>!
>
> For further information on Gentoo/IA64 installation please see the
> IA64 installation handbook.
>
> ELILO boot: Uncompressing Linux... done Loading file
> \efi\boot\gentoo.igz...done Linux version 3.3.8-gentoo (root@dolphin)
> (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.6, pie-0.4.7) ) #1 SMP Wed Oct
> 3 04:40:00 UTC 2012 EFI v1.10 by HP: SALsystab=0x3e528000 ACPI
> 2.0=0x3fe22000 SMBIOS=0x3e52a000 HCDP=0x3fe20000 booting generic
> kernel on platform hpzx1
> PCDP: v3 at 0x3fe20000
> Early serial console at MMIO 0x84053000 (options '9600n8') bootconsole
> [uart8250] enabled
> ACPI: RSDP 000000003fe22000 00028 (v02 HP)
> ACPI: XSDT 000000003fe2202c 00094 (v01 HP rx4640 00000000 HP 00000000)
> ACPI: FACP 000000003fe36cd8 000F4 (v03 HP rx4640 00000000 HP 00000000)
> ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16
> (20120111/tbfadt-548) ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20120111/tbfadt-548)
> ACPI: DSDT 000000003fe221c8 0D0F5 (v01 HP rx4640 00000007 INTL 20050309)
> ACPI: FACS 000000003fe36dd0 00040
> ACPI: SPCR 000000003fe36e10 00050 (v01 HP rx4640 00000000 HP 00000000)
> ACPI: DBGP 000000003fe36e60 00034 (v01 HP rx4640 00000000 HP 00000000)
> ACPI: APIC 000000003fe37080 000B0 (v01 HP rx4640 00000000 HP 00000000)
> ACPI: SPMI 000000003fe36e98 00050 (v04 HP rx4640 00000000 HP 00000000)
> ACPI: CPEP 000000003fe36f50 00034 (v01 HP rx4640 00000000 HP 00000000)
> ACPI: SSDT 000000003fe2f2c8 001A7 (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe2f478 00F65 (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe303e8 011CD (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe315b8 021B5 (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe33778 021B5 (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe35938 011CD (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe36b08 000DC (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe36be8 000E0 (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: Local APIC address c0000000fee00000
> 2 CPUs available, 2 CPUs total
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> Initial ramdisk at: 0xe0000040fe8c1000 (7111052 bytes) SAL 3.1: HP
> version 4.28 SAL Platform features: None
> SAL: AP wakeup using external interrupt vector 0xff MCA related
> initialization done Virtual mem_map starts at 0xa0007fffc7200000 Zone
> PFN ranges:
> DMA 0x00000400 -> 0x00040000
> Normal 0x00040000 -> 0x01040000
> Movable zone start PFN for each node
> Early memory PFN ranges
> 0: 0x00000400 -> 0x0000f7c9
> 0: 0x0000f88f -> 0x0000f94a
> 0: 0x0000ff00 -> 0x0000ff88
> 0: 0x01010000 -> 0x0103fbff
> 0: 0x0103fc00 -> 0x0103fef6
> 0: 0x0103ff1f -> 0x0103ff80
> 0: 0x0103ffa0 -> 0x0103fff8
> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> 201021 Policy zone: Normal Kernel command line:
> BOOT_IMAGE=atapi0:/efi/boot/gentoo initrd=gentoo.igz root=/dev/ram0
> init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot
> PID hash table entries: 4096 (order: 1, 32768 bytes)
> Memory: 4095648k/4119584k available (13370k code, 52480k reserved,
> 6165k data, 1152k init) Hierarchical RCU implementation.
> NR_IRQS:1024
> ACPI: Local APIC address c0000000fee00000 GSI 20 (level, low) -> CPU 0
> (0x0000) vector 49
> Console: colour VGA+ 80x25
> Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032)
> pid_max: default: 32768 minimum: 301
> Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
> Mount-cache hash table entries: 1024
> ACPI: Core revision 20120111
> Boot processor id 0x0/0x0
> Fixed BSP b0 value from CPU 1
> CPU 1: synchronized ITC with CPU 0 (last diff -32 cycles, maxerr 718
> cycles) Brought up 2 CPUs Total of 2 processors activated (4780.03
> BogoMIPS).
> DMI 2.3 present.
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> bio: create slab <bio-0> at 0
> ACPI: Added _OSI(Module Device)
> ACPI: Added _OSI(Processor Device)
> ACPI: Added _OSI(3.0 _SCP Extensions)
> ACPI: Added _OSI(Processor Aggregator Device)
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOSAPIC for interrupt routing
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [L000] (domain 0000 [bus 00-1f]) pci_root
> HWP0002:00: host bridge window [io 0x0000-0x1fff] pci_root
> HWP0002:00: host bridge window [mem 0x000a0000-0x000fffff] pci_root
> HWP0002:00: host bridge window [mem 0x80000000-0x8fffffff] pci_root
> HWP0002:00: host bridge window [mem 0x80004000000-0x80103fffffe] PCI
> host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io
> 0x0000-0x1fff] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000fffff] pci_bus 0000:00: root bus resource [mem
> 0x80000000-0x8fffffff] pci_bus 0000:00: root bus resource [mem
> 0x80004000000-0x80103fffffe]
> pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
> ACPI: PCI Root Bridge [L001] (domain 0000 [bus 20-3f]) pci_root
> HWP0002:01: host bridge window [io 0x2000-0x3fff] pci_root
> HWP0002:01: host bridge window [mem 0x90000000-0x9fffffff] pci_root
> HWP0002:01: host bridge window [mem 0x90004000000-0x90103fffffe] PCI
> host bridge to bus 0000:20 pci_bus 0000:20: root bus resource [io
> 0x2000-0x3fff] pci_bus 0000:20: root bus resource [mem
> 0x90000000-0x9fffffff] pci_bus 0000:20: root bus resource [mem
> 0x90004000000-0x90103fffffe]
> pci0000:20: Unable to request _OSC control (_OSC support mask: 0x19)
> ACPI: PCI Root Bridge [L002] (domain 0000 [bus 40-7f]) pci_root
> HWP0002:02: host bridge window [io 0x4000-0x7fff] pci_root
> HWP0002:02: host bridge window [mem 0xa0000000-0xbfffffff] pci_root
> HWP0002:02: host bridge window [mem 0xa0004000000-0xa0103fffffe] PCI
> host bridge to bus 0000:40 pci_bus 0000:40: root bus resource [io
> 0x4000-0x7fff] pci_bus 0000:40: root bus resource [mem
> 0xa0000000-0xbfffffff] pci_bus 0000:40: root bus resource [mem
> 0xa0004000000-0xa0103fffffe]
> pci0000:40: Unable to request _OSC control (_OSC support mask: 0x19)
> ACPI: PCI Root Bridge [L004] (domain 0000 [bus 80-9f]) pci_root
> HWP0002:03: host bridge window [io 0x8000-0x9fff] pci_root
> HWP0002:03: host bridge window [mem 0xc0000000-0xcfffffff] pci_root
> HWP0002:03: host bridge window [mem 0xc0004000000-0xc0103fffffe] PCI
> host bridge to bus 0000:80 pci_bus 0000:80: root bus resource [io
> 0x8000-0x9fff] pci_bus 0000:80: root bus resource [mem
> 0xc0000000-0xcfffffff] pci_bus 0000:80: root bus resource [mem
> 0xc0004000000-0xc0103fffffe]
> pci0000:80: Unable to request _OSC control (_OSC support mask: 0x19)
> ACPI: PCI Root Bridge [L005] (domain 0000 [bus a0-bf]) pci_root
> HWP0002:04: host bridge window [io 0xa000-0xbfff] pci_root
> HWP0002:04: host bridge window [mem 0xd0000000-0xdfffffff] pci_root
> HWP0002:04: host bridge window [mem 0xd0004000000-0xd0103fffffe] PCI
> host bridge to bus 0000:a0 pci_bus 0000:a0: root bus resource [io
> 0xa000-0xbfff] pci_bus 0000:a0: root bus resource [mem
> 0xd0000000-0xdfffffff] pci_bus 0000:a0: root bus resource [mem
> 0xd0004000000-0xd0103fffffe]
> pci0000:a0: Unable to request _OSC control (_OSC support mask: 0x19)
> ACPI: PCI Root Bridge [L006] (domain 0000 [bus c0-ff]) pci_root
> HWP0002:05: host bridge window [io 0xc000-0xffff] pci_root
> HWP0002:05: host bridge window [mem 0xe0000000-0xfdffffff] pci_root
> HWP0002:05: host bridge window [mem 0xe0004000000-0xe0103fffffe] PCI
> host bridge to bus 0000:c0 pci_bus 0000:c0: root bus resource [io
> 0xc000-0xffff] pci_bus 0000:c0: root bus resource [mem
> 0xe0000000-0xfdffffff] pci_bus 0000:c0: root bus resource [mem
> 0xe0004000000-0xe0103fffffe]
> pci0000:c0: Unable to request _OSC control (_OSC support mask: 0x19)
> vgaarb: device added:
> PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
> vgaarb: loaded
> vgaarb: bridge control possible 0000:00:04.0 SCSI subsystem
> initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000 Switching
> to clocksource itc
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 8 devices
> ACPI: ACPI bus type pnp unregistered
> NET: Registered protocol family 2
> IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
> TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
> TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
> TCP: Hash tables configured (established 524288 bind 65536) TCP reno
> registered UDP hash table entries: 2048 (order: 2, 65536 bytes)
> UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes)
> NET: Registered protocol family 1
> GSI 17 (level, low) -> CPU 1 (0x0100) vector 50 GSI 17 (level, low) ->
> CPU 1 (0x0100) vector 50 unregistered GSI 18 (level, low) -> CPU 0
> (0x0000) vector 50 GSI 18 (level, low) -> CPU 0 (0x0000) vector 50
> unregistered GSI 23 (level, low) -> CPU 1 (0x0100) vector 50 GSI 23
> (level, low) -> CPU 1 (0x0100) vector 50 unregistered Trying to unpack
> rootfs image as initramfs...
> Freeing initrd memory: 6928kB freed
> perfmon: version 2.0 IRQ 238
> perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47
> bits) PAL Information Facility v0.5
> perfmon: added sampling format default_format
> perfmon_default_smpl: default_format v2.0 registered HugeTLB
> registered 256 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
> squashfs: version 4.0 (2009/01/31) Phillip Lougher SGI XFS with ACLs,
> security attributes, large block/inode numbers, no debug enabled SGI
> XFS Quota Management subsystem msgmni has been set to 8012 Block layer
> SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler
> noop registered io scheduler deadline registered io scheduler cfq
> registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> sn_pci_hotplug_init: PROM version does not support hotplug.
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> acpiphp: Slot [7] registered
> acpiphp: Slot [3] registered
> acpiphp: Slot [4] registered
> acpiphp: Slot [5] registered
> acpiphp: Slot [6] registered
> acpiphp: Slot [8] registered
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled GSI 16
> (level, low) -> CPU 0 (0x0000) vector 50
> 0000:00:01.1: ttyS1 at MMIO 0x84053000 (irq = 53) is a 16550A console
> [ttyS1] enabled, bootconsole disabled console [ttyS1] enabled,
> bootconsole disabled
> 0000:00:01.1: ttyS2 at MMIO 0x84053010 (irq = 53) is a 16550A
> 0000:00:01.1: ttyS3 at MMIO 0x84053038 (irq = 53) is a 16550A EFI Time
> Services Driver v0.4
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: Power Button [PWRF]
> input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
> ACPI: Sleep Button [SLPF]
> thermal LNXTHERM:00: registered as thermal_zone0
> ACPI: Thermal Zone [THM0] (27 C)
> brd: module loaded
> loop: module loaded
> rdac: device handler registered
> hp_sw: device handler registered
> emc: device handler registered
> alua: device handler registered
> Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O
> RAID controllers...
> GSI 71 (level, low) -> CPU 1 (0x0100) vector 51
> sym0: <1010-66> rev 0x1 at pci 0000:c0:01.0 irq 54
> sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
> sym0: open drain IRQ line driver, using on-chip SRAM
> sym0: using LOAD/STORE-based firmware.
> sym0: handling phase mismatch from SCRIPTS.
> sym0: SCSI BUS has been reset.
> scsi0 : sym-2.2.3
> scsi target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
> scsi 0:0:0:0: Direct-Access COMPAQ BF07285A36 HPB6 PQ: 0 ANSI: 3
> scsi target0:0:0: tagged command queuing enabled, command queue depth 16.
> scsi target0:0:0: Beginning Domain Validation scsi target0:0:0:
> FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62) scsi target0:0:0:
> Ending Domain Validation
> scsi 0:0:1:0: Direct-Access COMPAQ BF072863BA HPB6 PQ: 0 ANSI: 3
> scsi target0:0:1: tagged command queuing enabled, command queue depth 16.
> scsi target0:0:1: Beginning Domain Validation scsi target0:0:1:
> FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) scsi target0:0:1:
> Ending Domain Validation
> scsi 0:0:2:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0 ANSI: 3
> scsi target0:0:2: tagged command queuing enabled, command queue depth 16.
> scsi target0:0:2: Beginning Domain Validation scsi target0:0:2:
> FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) scsi target0:0:2:
> Ending Domain Validation
> scsi 0:0:3:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0 ANSI: 3
> scsi target0:0:3: tagged command queuing enabled, command queue depth 16.
> scsi target0:0:3: Beginning Domain Validation scsi target0:0:3:
> FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) scsi target0:0:3:
> Ending Domain Validation
> scsi 0:0:15:0: Processor COMPAQ PROLIANT 7L7E*DB 2.30 PQ: 0 ANSI: 2
> scsi target0:0:15: Beginning Domain Validation scsi target0:0:15:
> Ending Domain Validation sd 0:0:1:0: [sdb] 142264000 512-byte logical
> blocks: (72.8 GB/67.8 GiB) sd 0:0:0:0: [sda] 142264000 512-byte
> logical blocks: (72.8 GB/67.8 GiB) sd 0:0:2:0: [sdc] 142264000
> 512-byte logical blocks: (72.8 GB/67.8 GiB) sd 0:0:0:0: [sda] Write
> Protect is off sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0:
> [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
> sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports
> DPO and FUA sd 0:0:3:0: [sdd] 142264000 512-byte logical blocks: (72.8
> GB/67.8 GiB) sd 0:0:2:0: [sdc] Write Protect is off sd 0:0:2:0: [sdc]
> Write cache: disabled, read cache: enabled, supports DPO and FUA sd
> 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi
> generic sg1 type 0 sd 0:0:3:0: [sdd] Write Protect is off
> sda: unknown partition table
> sdb: unknown partition table
> sd 0:0:2:0: Attached scsi generic sg2 type 0 sd 0:0:3:0: Attached scsi
> generic sg3 type 0 scsi 0:0:15:0: Attached scsi generic sg4 type 3 GSI
> 21 (level, low) -> CPU 0 (0x0000) vector 52 pata_cmd64x 0000:00:03.0:
> Secondary port is disabled
> scsi1 : pata_cmd64x
> scsi2 : pata_cmd64x
> ata1: PATA max UDMA/100 cmd 0xe18 ctl 0xe24 bmdma 0xe00 irq 55
> ata2: DUMMY
> bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver
> bnx2x 1.70.35-0 (2011/11/10)
> enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.31
> e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
> e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
> igb: Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
> igb: Copyright (c) 2007-2012 Intel Corporation.
> ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version
> 3.6.7-k
> ixgbe: Copyright (c) 1999-2012 Intel Corporation.
> Solarflare NET driver v3.1
> tehuti: Tehuti Networks(R) Network Driver, 7.29.3
> tehuti: Options: hw_csum
> Fusion MPT base driver 3.04.20
> Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver
> 3.04.20 GSI 27 (level, low) -> CPU 1 (0x0100) vector 53
> mptbase: ioc0: Initiating bringup
> sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports
> DPO and FUA sd 0:0:1:0: [sdb] Attached SCSI disk sd 0:0:0:0: [sda]
> Attached SCSI disk
> sdc: unknown partition table
> sd 0:0:2:0: [sdc] Attached SCSI disk
> sdd: unknown partition table
> sd 0:0:3:0: [sdd] Attached SCSI disk
> ata1.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.20, max MWDMA2
> ata1.00: configured for MWDMA2
> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.20 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 40x/24x writer cd/rw xa/form2 cdda tray
> cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi
> generic sg5 type 5
> ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
> scsi3 : ioc0: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=56
> scsi 3:0:1:0: Direct-Access HP 73.4G MAS3735NC HPC4 PQ: 0 ANSI: 3
> scsi target3:0:1: Beginning Domain Validation scsi target3:0:1: Ending
> Domain Validation scsi target3:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT
> IU QAS RTI PCOMP (6.25 ns, offset 127) sd 3:0:1:0: Attached scsi
> generic sg6 type 0 sd 3:0:1:0: [sde] 143374738 512-byte logical
> blocks: (73.4 GB/68.3 GiB) sd 3:0:1:0: [sde] Write Protect is off sd
> 3:0:1:0: [sde] Write cache: disabled, read cache: enabled, supports
> DPO and FUA GSI 28 (level, low) -> CPU 0 (0x0000) vector 54
> mptbase: ioc1: Initiating bringup
> ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
> scsi4 : ioc1: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=57
> scsi 4:0:0:0: Direct-Access HP 73.4G MAS3735NC HPC4 PQ: 0 ANSI: 3
> scsi target4:0:0: Beginning Domain Validation
> sde: sde1 sde2 sde3 sde4 sde5
> scsi target4:0:0: Ending Domain Validation scsi target4:0:0: FAST-160
> WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP (6.25 ns, offset 127) sd
> 4:0:0:0: Attached scsi generic sg7 type 0 sd 4:0:0:0: [sdf] 143374738
> 512-byte logical blocks: (73.4 GB/68.3 GiB) sd 3:0:1:0: [sde] Attached
> SCSI disk sd 4:0:0:0: [sdf] Write Protect is off sd 4:0:0:0: [sdf]
> Write cache: disabled, read cache: enabled, supports DPO and FUA
> Fusion MPT FC Host driver 3.04.20 Fusion MPT SAS Host driver 3.04.20
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver GSI 23
> (level, low) -> CPU 1 (0x0100) vector 55 ehci_hcd 0000:00:02.2: EHCI
> Host Controller ehci_hcd 0000:00:02.2: new USB bus registered,
> assigned bus number 1
> sdf: sdf1 sdf2 sdf3 sdf4
> ehci_hcd 0000:00:02.2: irq 52, io mem 0x84050000 sd 4:0:0:0: [sdf]
> Attached SCSI disk ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 0.95
> hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver GSI 17 (level,
> low) -> CPU 0 (0x0000) vector 56 ohci_hcd 0000:00:02.0: OHCI Host
> Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
> number 2 ohci_hcd 0000:00:02.0: irq 50, io mem 0x84052000 hub 2-0:1.0:
> USB hub found hub 2-0:1.0: 3 ports detected GSI 18 (level, low) -> CPU
> 1 (0x0100) vector 57 ohci_hcd 0000:00:02.1: OHCI Host Controller
> ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:02.1: irq 51, io mem 0x84051000 hub 3-0:1.0: USB hub
> found hub 3-0:1.0: 2 ports detected
> uhci_hcd: USB Universal Host Controller Interface driver
> mousedev: PS/2 mouse device common for all mice
> device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
> dm-devel@redhat.com EFI Variables Facility v0.08 2004-May-17
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> Freeing unused kernel memory: 1152kB freed
>>> Loading modules
> :: Scanning for cciss...cciss loaded.
> :: Scanning for qla2xxx...qla2xxx loaded.
> :: Scanning for lpfc...lpfc loaded.
> :: Scanning for usb-storage...usb-storage loaded.
> :: Scanning for scsi_wait_scan...scsi_wait_scan loaded.
> :: Scanning for dm-mirror...dm-log, dm-region-hash, dm-mirror loaded.
> :: Scanning for dm-snapshot...dm-snapshot loaded.
> :: Scanning for raid0...raid0 loaded.
> :: Scanning for raid1...raid1 loaded.
> :: Scanning for raid456...async_tx, xor, async_xor, raid6_pq, async_pq, async_memcpy, async_raid6_recov, raid456 loaded.
> :: Scanning for raid10...raid10 loaded.
> :: Scanning for nfs...sunrpc, lockd, nfs loaded.
> :: Scanning for fuse...fuse loaded.
> :: Scanning for e1000...e1000 loaded.
> :: Scanning for tg3...libphy, tg3 loaded.
>>> Activating mdev
>>> Loading keymaps
> Please select a keymap from the following list by typing in the
> appropriate name or number. Hit Enter for the default "us/41" US English keymap.
>
> 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf
> 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq
> 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua
> 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk
> 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us
> 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe
>
> << Load keymap (Enter for default):
>>> Keeping default keymap
>>> Making tmpfs for /newroot
>>> Looking for the cdrom
>>> Attempting to mount media:- /dev/sr0 Media found on /dev/sr0
>>> Determining root device...
>>> Determining looptype ...
>>> Mounting squashfs filesystem
>>> Copying read-write image contents to tmpfs No cdupdate.sh script
>>> found, skipping...
>>> Booting (initramfs)..
> INIT: version 2.88 booting
>
> OpenRC 0.9.8.4 is starting up Gentoo Linux (ia64)
>
> * /proc is already mounted, skipping
> * WARNING: rc_sys not defined in rc.conf. Falling back to automatic
> detection
> * Caching service dependencies ...
> Service `unmute' needs non existent service `alsasound'
> [ ok ]
> * Mounting debug filesystem ...
> [ ok ]
> * /dev is already mounted
> * Starting udev ...
> [ ok ]
> * Populating /dev with existing devices through uevents ...
> [ ok ]
> * Waiting for uevents to be processed ...
> [ ok ]
> * Mounting /dev/shm ...
> [ ok ]
> * Setting system clock using the hardware clock [UTC] ...
> [ ok ]
> * Autoloaded 0 module(s)
> * Starting up RAID devices ...
> mdadm: No arrays found in config file or automatically [ !! ] [ ok ]
> * Checking local filesystems ...
> [ ok ]
> * Updating /etc/mtab ...
> [ ok ]
> * Mounting local filesystems ...
> [ ok ]
> * Configuring kernel parameters ...
> [ ok ]
> mkdir: cannot create directory '/var/run': File exists
> * failed to create needed directory /var/run [ !! ]
> * ERROR: bootmisc failed to start
> * Setting hostname to livecd ...
> [ ok ]
> * Setting terminal encoding [UTF-8] ...
> [ ok ]
> * Setting keyboard mode [UTF-8] ...
> [ ok ]
> * Loading key mappings [us] ...
> [ ok ]
> * Bringing up interface lo
> * Caching network module dependencies
> * 127.0.0.1/8 ...
> [ ok ]
> * Adding routes
> * 127.0.0.0/8 via 127.0.0.1 ...
> [ ok ]
> * Mounting USB device filesystem [usbfs] ...
> [ ok ]
> * Mounting misc binary format filesystem ...
> [ ok ]
> * Loading custom binary format handlers ...
> [ ok ]
> * Activating swap devices ...
> [ ok ]
> INIT: Entering runlevel: 3
> * Checking for firmware to unpack ...
> * Unpacking firmware ...
> [ ok ]
> [ ok ]
> * Starting hwsetup ...
> [ ok ]
> mkdir: cannot create directory '/var/run': File exists
> * failed to create needed directory /var/run [ !! ]
> * ERROR: bootmisc failed to start
> * Starting syslog-ng ...
> Error creating persistent state file; filename='/var/lib/misc/syslog-ng.persist-', error='No such file or directory (2)'
> * start-stop-daemon: failed to start `/usr/sbin/syslog-ng'
> * Failed to start syslog-ng
> [ !! ]
> * ERROR: syslog-ng failed to start
> * Starting acpid ...
> acpid: can't open socket /var/run/acpid.socket: No such file or
> directory
> * Failed to start acpid
> [ !! ]
> * ERROR: acpid failed to start
> * ERROR: unmute needs service(s) alsasound
> * Mouse is Device 05f3:0203 at /dev/input/mice ...
> * Caching service dependencies ...
> Service `unmute' needs non existent service `alsasound'
> [ ok ]
> * Starting gpm ...
> [ ok ]
> * Starting rpcbind ...
> [ !! ]
> * ERROR: rpcbind failed to start
> * ERROR: cannot start rpc.statd as rpcbind would not start
> * ERROR: cannot start nfsmount as rpcbind would not start
> * Auto-scrambling root password for security ...
> [ ok ]
> * ERROR: cannot start autoconfig as acpid would not start
> * Adjusting inittab ...
> [ ok ]
> * Mounting network filesystems ...
> [ ok ]
> * Doing udev cleanups
> * Starting local
> [ ok ]
>
> Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle persone indicate. La diffusione, copia o qualsiasi altra azione derivante dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora abbiate ricevuto questo documento per errore siete cortesemente pregati di darne immediata comunicazione al mittente e di provvedere alla sua distruzione, Grazie.
>
> This e-mail and any attachments is confidential and may contain privileged information intended for the addressee(s) only. Dissemination, copying, printing or use by anybody else is unauthorised. If you are not the intended recipient, please delete this message and any attachments and advise the sender by return e-mail, Thanks.
>
>
> --
> To UNSUBSCRIBE, email to debian-ia64-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
> Archive:
> http://lists.debian.org/5DA6D16A39710843ACA344B75F2C76891AAF0D1818@GRF
> MBX702RM001.griffon.local
>
--
To UNSUBSCRIBE, email to debian-ia64-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: [🔎] C56959778F265C49AE6E1D454DCB4D2301441319@TELMBB001RM001.telecomitalia.local">http://lists.debian.org/[🔎] C56959778F265C49AE6E1D454DCB4D2301441319@TELMBB001RM001.telecomitalia.local
Reply to: