[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Apt-get dist-upgrade squeeze->wheezy



Mmmh, the syntax seems correct. As an alternative, rather than
entering the console parameters at the boot prompt, you could also try
to add it to the elilo.conf file:

image=...
     initrd=...
     root=
     append="console=ttyS0,9600n8"

I don't know for rx4640, but I also had to set input/output/error
console to PcAnsi (IIRC) terminal in EFI with zx6000.

     Emeric


2012/9/24 Bettoni Fabio <fabio.bettoni@telecomitalia.it>:
> Set to BMC COM port, to access via telnet
>
> I was suspecting I had to use VGA console, I will do tomorrow,
>
> But I also tried to add one of the following to Boot: prompt
> console=ttyS0,9800n8
> console=ttyS1,9800n8
> console=ttyS2,9800n8
>
> and they didn't work
>
>
> -----Messaggio originale-----
> Da: Émeric Maschino [mailto:emeric.maschino@gmail.com]
> Inviato: lunedì 24 settembre 2012 20:41
> A: Bettoni Fabio
> Cc: debian-ia64@lists.debian.org
> Oggetto: Re: Apt-get dist-upgrade squeeze->wheezy
>
> Hi,
>
> Is the console output set to VGA console or COM port?
>
>      Emeric
>
>
> 2012/9/24 Bettoni Fabio <fabio.bettoni@telecomitalia.it>:
>> Sorry, the update was from squeeze to wheezy
>>
>> -----Messaggio originale-----
>> Da: Bettoni Fabio [mailto:fabio.bettoni@telecomitalia.it]
>> Inviato: lunedì 24 settembre 2012 11.22
>> A: 'debian-ia64@lists.debian.org'
>> Oggetto: R: Apt-get dist-upgrade squeeze->wheezy
>>
>> Hi,
>>
>> I did the whole dist-upgrade on rx4640 from squeeze to sid, and it ended with unbootable system (I think it did not copy new vmlinuz and initrd to EFI partition)
>>
>>
>> I written to CD: http://cdimage.debian.org/cdimage/weekly-builds/ia64/iso-cd/debian-testing-ia64-CD-1.iso
>> but when I try to start I get:
>>
>>  |       This is the Debian GNU/Linux installation system, built on 20120828. |
>>  |                                                                            |
>>  | Use the arrow keys to select a menu item and then Enter to select it.      |
>>  | Use the function keys for help. On a serial console, use Ctrl-F and the    |
>>  | function key number instead.                                               |
>>  |                                                                            |
>>  | Beware that this is an OS installer, and misuse can result in the loss of  |
>>  | any data currently on your disks.                                          |
>>  |  /----------------------------------------------------------------------\  |
>>  |  | Install                                                              |^ |
>>  |  | Install [Expert mode]                                                |  |
>>  |  | Rescue                                                               |  |
>>  |  |                                                                      |  |
>>  |  |                                                                      |  |
>>  |  |                                                                      |v |
>>  |  \----------------------------------------------------------------------/  |
>>  |                                                                            |
>>  | Boot:                                                                      |
>>  |                                                                            |
>>  | Help: [F1-General]  [F2-Params]                                            |
>>
>> If I choos Install [Expert mode] pr Rescue I get the following:
>>
>> Uncompressing Linux... done
>> Loading file \initrd.gz...done
>> ***********************************************************
>> * ROM Version : 04.28
>> * ROM Date    : 06/06/2007
>> * BMC Version :  04.06
>> ***********************************************************
>> 0 0 0x0015B2 0x0000000019211505 boot time event
>> 1 0 0x0000A4 0x0000000000000000 start memory configuration 0 0 0x0015B2 0x0000000024971388 boot time event
>> 1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
>>
>> What can I do ?  Is system unsupported or I have to give some magic parameters ?
>>
>> Fabio
>>
>>
>> Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle persone indicate. La diffusione, copia o qualsiasi altra azione derivante dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora abbiate ricevuto questo documento per errore siete cortesemente pregati di darne immediata comunicazione al mittente e di provvedere alla sua distruzione, Grazie.
>>
>> This e-mail and any attachments is confidential and may contain privileged information intended for the addressee(s) only. Dissemination, copying, printing or use by anybody else is unauthorised. If you are not the intended recipient, please delete this message and any attachments and advise the sender by return e-mail, Thanks.
>>
>>
>> --
>> To UNSUBSCRIBE, email to debian-ia64-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>> Archive: [🔎] 5DA6D16A39710843ACA344B75F2C76891AAEB60C23@GRFMBX702RM001.griffon.local">http://lists.debian.org/[🔎] 5DA6D16A39710843ACA344B75F2C76891AAEB60C23@GRFMBX702RM001.griffon.local
>>
>>
>> --
>> To UNSUBSCRIBE, email to debian-ia64-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>> Archive: [🔎] 5DA6D16A39710843ACA344B75F2C76891AAEB60C54@GRFMBX702RM001.griffon.local">http://lists.debian.org/[🔎] 5DA6D16A39710843ACA344B75F2C76891AAEB60C54@GRFMBX702RM001.griffon.local
>>


Reply to: