Re: qla2xxx
Hello Dan
Now our system work perfectly.
The origin of our problem is the first switch of the disk controller
(qlogic and megaraid) discovery method.
This situation does not upgrade the /etc/elilo.conf, the boot parameter
= always /dev/sda1 and not /dev/sdg1, when elilo start an error are
encoured and the vmlinuz and initrd are not updated.
I see the problem today when I upgrade the system with the new kernel
upgrade.
I correct the elilo.conf, launch elilo command and all are correct now.
Thanks for your help
Guy
dann frazier a écrit :
> On Mon, Jan 29, 2007 at 06:40:46PM +0100, De Leeuw Guy wrote:
>
>> Hello
>>
>> I continue to have a problem with the initialization of the qla2xxx module.
>>
>> see the extract of the /var/log/dmesg
>>
>> ACPI: PCI Interrupt 0000:10:01.0[A] -> GSI 144 (level, low) -> IRQ 49
>> qla2xxx 0000:10:01.0: Found an ISP2312, irq 49, iobase 0xc0000000cbff0000
>> qla2xxx 0000:10:01.0: Configuring PCI space...
>> qla2xxx 0000:10:01.0: Configure NVRAM parameters...
>> qla2xxx 0000:10:01.0: Verifying loaded RISC code...
>> qla2xxx 0000:10:01.0: Firmware image unavailable.
>> qla2xxx 0000:10:01.0: Firmware images can be retrieved from:
>> ftp://ftp.qlogic.com/outgoing/linux/firmware/.
>> qla2xxx 0000:10:01.0: Failed to initialize adapter
>>
>> I'm sure that the firmware are available on the initramfs.
>>
>> I need to launch modprobe -r qla2xxx && modprobe qla2xxx && mount -a to
>> mount my drives
>>
>> Could you help me ?
>>
>
> I don't see how this is an ia64-specific issue - I suggest asking on
> debian-user or filing a bug against the firmware package.
>
>
Reply to: