Re: Initramfs image triggers a segmentation fault at startup
Hi,
I'm wondering if this issue may be related to the remark Dann Frazier
made on December 9th:
"klibc is buggy on ia64, so avoid initramfs-tools for now. Use yaird
instead."
(cf. http://lists.debian.org/debian-ia64/2005/12/msg00011.html)
Is klibc still buggy on ia64? Should we use initrd images built with
yaird at present time? I'm asking this because Debian Installer still
creates initramfs images and a fresh install of Debian Etch is thus
unbootable.
Émeric
Le lundi 06 mars 2006 à 20:30 +0100, Émeric Maschino a écrit :
> Hi,
>
> Is there currently a problem with initramfs image? The generated initramfs image
> (by the debian-installer or during kernel image update) triggers a segmentation
> fault on my hp workstation zx6000 at startup and I'm left in a BusyBox
> environment (complete trace recorded on a serial console at the end of this
> post). This is with up-to-date Debian Etch. As a workaround, I must create an
> initrd image either using mkinitrd from the initrd-tools package or using
> mkinitrd.yaird from the yaird package.
>
> Cheers,
>
> Émeric
>
> ELILO boot: Linux
> Uncompressing Linux... done
> Loading file \EFI\debian\initrd.img...done
> Linux version 2.6.15-1-mckinley-smp (Debian 2.6.15-7) (waldi@debian.org) (gcc ve
> rsion 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 SMP Wed Feb 22 16:20:54 C
> ST 2006
> EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP
> =0x3fb2c000
> booting generic kernel on platform hpzx1
> PCDP: v0 at 0x3fb2c000
> Explicit "console="; ignoring PCDP
> Initial ramdisk at: 0xe0000040fe72c000 (8819836 bytes)
> SAL 3.1: HP version 2.31
> SAL Platform features: None
> SAL: AP wakeup using external interrupt vector 0xff
> No logical to physical processor mapping available
> ACPI: Local APIC address c0000000fee00000
> GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
> 2 CPUs available, 2 CPUs total
> MCA related initialization done
> Virtual mem_map starts at 0xa0007fffc7200000
> Built 1 zonelists
> Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/vmlinuz root=/dev/sda2 ro cons
> ole=ttyS0,9600n8
> PID hash table entries: 4096 (order: 12, 131072 bytes)
> Console: colour VGA+ 80x25
> Memory: 6217472k/6248192k available (4579k code, 46464k reserved, 1943k data, 33
> 6k init)
> McKinley Errata 9 workaround not needed; disabling it
> Security Framework v1.0.0 initialized
> SELinux: Disabled at boot.
> Capability LSM initialized
> Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes)
> Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes)
> Mount-cache hash table entries: 1024
> Boot processor id 0x0/0x0
> CPU 1: synchronized ITC with CPU 0 (last diff -20 cycles, maxerr 580 cycles)
> Brought up 2 CPUs
> Total of 2 processors activated (3891.20 BogoMIPS).
> checking if image is initramfs... it is
> Freeing initrd memory: 8608kB freed
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> ACPI: Subsystem revision 20050902
> ACPI: Interpreter enabled
> ACPI: Using IOSAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> ACPI: PCI Root Bridge [PCI1] (0000:20)
> ACPI: PCI Root Bridge [PCI2] (0000:40)
> ACPI: PCI Root Bridge [PCI3] (0000:60)
> ACPI: PCI Root Bridge [PCI4] (0000:80)
> ACPI: PCI Root Bridge [PCI6] (0000:c0)
> IOC: reserving 512Mb of IOVA space at 0x60000000 for agpgart
> IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
> perfmon: version 2.0 IRQ 238
> perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
> PAL Information Facility v0.5
> perfmon: added sampling format default_format
> perfmon_default_smpl: default_format v2.0 registered
> audit: initializing netlink socket (disabled)
> audit(1141673603.032:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
> Initializing Cryptographic API
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> EFI Time Services Driver v0.4
> i8042.c: No controller found.
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> GSI 34 (edge, high) -> CPU 0 (0x0000) vector 49
> serial8250: ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A
> GSI 35 (edge, high) -> CPU 1 (0x0100) vector 50
> serial8250: ttyS1 at MMIO 0xff5e2000 (irq = 50) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
> mice: PS/2 mouse device common for all mice
> NET: Registered protocol family 2
> IP route cache hash table entries: 262144 (order: 7, 2097152 bytes)
> TCP established hash table entries: 1048576 (order: 10, 16777216 bytes)
> TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
> TCP: Hash tables configured (established 1048576 bind 65536)
> TCP reno registered
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Freeing unused kernel memory: 336kB freed
> Loading, please wait...
> Begin: Loading essential drivers... ...
> Done.
> Begin: Running /ACPI: Thermal Zone [THM0] (27 C)
> scripts/init-premount ...
> eval: 1: array_udev-helper=udev: not found
> eval: 1: array_udev-helper=: not found
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> tg3.c:v3.47 (Dec 28, 2005)
> GSI 29 (level, low) -> CPU 0 (0x0000) vector 51
> ACPI: PCI Interrupt 0000:20:02.0[A] -> GSI 29 (level, low) -> IRQ 51
> eth0: Tigon3 [partno(BCM95700A6) rev 0105 PHY(5701)] (PCI:66MHz:64-bit) 10/100/1
> 000BaseT Ethernet 00:30:6e:4a:d2:bd
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
> eth0: dma_rwctrl[76ff2d0f]
> SCSI subsystem initialized
> GSI 16 (level, low) -> CPU 1 (0x0100) vector 52
> ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 52
> ohci_hcd 0000:00:01.0: OHCI Host Controller
> ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 1
> ohci_hcd 0000:00:01.0: irq 52, io mem 0x80023000
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 3 ports detected
> Fusion MPT base driver 3.03.04
> Copyright (c) 1999-2005 LSI Logic Corporation
> e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
> e100: Copyright(c) 1999-2005 Intel Corporation
> Fusion MPT SPI Host driver 3.03.04
> GSI 17 (level, low) -> CPU 0 (0x0000) vector 53
> ACPI: PCI Interrupt 0000:00:01.1[B] -> GSI 17 (level, low) -> IRQ 53
> ohci_hcd 0000:00:01.1: OHCI Host Controller
> ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:01.1: irq 53, io mem 0x80022000
> usb 1-1: new low speed USB device using ohci_hcd and address 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> GSI 18 (level, low) -> CPU 1 (0x0100) vector 54
> ACPI: PCI Interrupt 0000:00:01.2[C] -> GSI 18 (level, low) -> IRQ 54
> ehci_hcd 0000:00:01.2: EHCI Host Controller
> ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 3
> ehci_hcd 0000:00:01.2: irq 54, io mem 0x80021000
> ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
> usbcore: registered new driver hiddev
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 5 ports detected
> GSI 20 (level, low) -> CPU 0 (0x0000) vector 55
> ACPI: PCI Interrupt 0000:00:03.0[A] -> <6>CMD649: IDE controller at PCI slot 000
> 0:00:02.0
> GSI 21 (level, low) -> CPU 1 (0x0100) vector 56
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 56
> CMD649: chipset revision 2
> CMD649: 100% native mode on irq 56
> ide0: BM-DMA at 0x0d40-0x0d47, BIOS settings: hda:pio, hdb:pio
> ide1: BM-DMA at 0x0d48-0x0d4f, BIOS settings: hdc:pio, hdd:pio
> hda: DV-28E-B, ATAPI CD/DVD-ROM drive
> GSI 20 (level, low) -> IRQ 55
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> e100: eth1: e100_probe: addr 0x80020000, irq 55, MAC addr 00:30:6E:4A:D3:AB
> usb 1-1: USB disconnect, address 2
> ide0 at 0xd58-0xd5f,0xd66 on irq 56
> usb 1-1: new low speed USB device using ohci_hcd and address 3
> GSI 27 (level, low) -> CPU 0 (0x0000) vector 57
> ACPI: PCI Interrupt 0000:20:01.0[A] -> GSI 27 (level, low) -> IRQ 57
> mptbase: Initiating ioc0 bringup
> input: Microsoft Microsoft Wheel Mouse Optical® as /class/input/input0
> input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-000
> 0:00:01.0-1
> ioc0: 53C1030: Capabilities={Initiator,Target}
> usb 2-1: new low speed USB device using ohci_hcd and address 3
> input: CHICONY HP Basic USB Keyboard as /class/input/input1
> input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:01.
> 1-1
> usb 2-2: new full speed USB device using ohci_hcd and address 4
> scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=57
> Vendor: HP 73.4G Model: ST373453LC Rev: HPC7
> Type: Direct-Access ANSI SCSI revision: 03
> Vendor: HP 73.4G Model: ST3<6>hub 2-2:1.0: USB hub found
> 7<6>hub 2-2:1.0: 3 ports detected
> 3453LC Rev: HPC7
> Type: Direct-Access ANSI SCSI revision: 03
> GSI 28 (level, low) -> CPU 1 (0x0100) vector 58
> ACPI: PCI Interrupt 0000:20:01.1[B] -> GSI 28 (level, low) -> IRQ 58
> mptbase: Initiating ioc1 bringup
> ioc1: 53C1030: Capabilities={Initiator,Target}
> scsi1 : ioc1: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=58
> SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
> SCSI device sda: drive cache: write through
> SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
> SCSI device sda: drive cache: write through
> sda: sda1 sda2 sda3
> sd 0:0:0:0: Attached scsi disk sda
> SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
> SCSI device sdb: drive cache: write through
> SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
> SCSI device sdb: drive cache: write through
> sdb: sdb1 sdb2
> sd 0:0:1:0: Attached scsi disk sdb
> hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> Done.
> Begin: Mounting root file system... ...
> Begin: Running /scripts/local-top ...
> Done.
> Segmentation fault
> Begin: Running /scripts/local-premount ...
> Done.
> Usage: modprobe [-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [-o <modname>] <m
> odname> [parameters...]
> modprobe -r [-n] [-i] [-v] <modulename> ...
> modprobe -l -t <dirname> [ -a <modulename> ...]
> mount:
> Cannot read /etc/fstab: No such file or directory
> Begin: Running /scripts/log-bottom ...
> Done.
> Done.
> Begin: Running /scripts/init-bottom ...
> mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory
> Done.
> mount: Mounting /sys on /root/sys failed: No such file or directory
> mount: Mounting /proc on /root/proc failed: No such file or directory
> Target filesystem doesn't have /sbin/init
>
>
> BusyBox v1.01 (Debian 1:1.01-4) Built-in shell (ash)
> Enter 'help' for a list of built-in commands.
>
> /bin/sh: can't access tty; job control turned off
> / #
>
>
Reply to: