[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Testers needed: is smartmontools 64-bit clean?



Grant,

Thanks!

Could you please do a long or short self test
(-t short or -t long)
and send me the output after that has also finished?

I'd also appreciate the output of smartctl -A.

Cheers,
	Bruce

On Mon, 30 Jun 2003, Grant Grundler wrote:

> On Sun, Jun 29, 2003 at 10:13:18AM -0500, Bruce Allen wrote:
> > Recently, in response to an inquiry from a PPC user, I removed the "little
> > endian x86 bias" from the code.  Before generating a new release, I would
> > also like to verify that the code is 64-bit clean. Could a few linux
> > IA64/AXP users from this group please download smartmontools from CVS and
> > test that it works correctly for them?
> 
> very cool!
> 
> > To test the code, please see http://smartmontools.sourceforge.net/ for
> > instructions on how to download the latest code from CVS.  Please do NOT
> > use one of the existing releases (such as 5.1-14) as it does not have the
> > latest code base. Then send or post the output of smartctl -a for any ATA
> > or SCSI devices that you have.
> 
> attached for RX2600 (ia64) with SCSI and FC disks connected.
> I'll try for parisc (A500) as well - but that only has 64-bit kernel
> and not 64-bit userspace.
> 
> > Also, please try running self-tests with the smartctl -t option,
> > and send or post additional smartctl -a output
> > when those tests have completed.
> 
> Seems to work too:
> gsyprf3:/usr/src/sm5# smartctl -t offline /dev/sdf
> smartctl version 5.1-15 Copyright (C) 2002-3 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
> 
> Default Self Test Successful
> gsyprf3:/usr/src/sm5# smartctl -a /dev/sdf
> smartctl version 5.1-15 Copyright (C) 2002-3 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
> 
> Device: HP       9.10GB C 80-F612 Version:     
> Serial number: PL007670        
> Device type: disk
> Local Time is: Mon Jun 30 09:24:47 2003 PDT
> Device supports SMART and is Enabled
> Temperature Warning Enabled
> SMART Health Status: OK
> Current Drive Temperature:     33 C
> Drive Trip Temperature:        65 C
> Manufactured in week 04 of year 2001
> Current start stop count:      92 times
> Recommended start stop count:  10000 times
> 
> Error counter log:
>           Errors Corrected    Total      Total   Correction     Gigabytes    Total
> 	      delay:       [rereads/    errors   algorithm      processed    uncorrected
> 	    minor | major  rewrites]  corrected  invocations   [10^9 bytes]  errors
> read:          0       62         0         0          0      41288.144		  0
> write:         0      127         0         0          0       4669.524           0
> 
> Non-medium error count:      608
> No self-tests have been logged
> Long (extended) Self Test duration: 665 seconds [11.1 minutes]
> gsyprf3:/usr/src/sm5# 
> 
> 
> One gripe: would be nice if the output fit in 80 columns...maybe that's
> not feasible...
> 
> hth!
> grant
> 
> 



Reply to: