Re: Hurd installation

[john <electrovalent@yandex.com>]

Of course.

Notebook: Acer Aspire 3810TZ (Aspire 3810 Series)
Processor: Intel Pentium Dual Core SU4100
Graphics Adapter: Intel Graphics Media Accelerator (GMA) 4500MHD

*-storage
       description: SATA controller
       product: 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller 
[AHCI mode]
       vendor: Intel Corporation
       physical id: 1f.2
       bus info: pci@0000:00:1f.2
       version: 03
       width: 32 bits
       clock: 66MHz
       capabilities: storage msi pm ahci_1.0 bus_master cap_list
       configuration: driver=ahci latency=0
       resources: irq:42 ioport:3108(size=8) ioport:311c(size=4) 
ioport:3100(size=8) ioport:3118(size=4) ioport:3020(size=32) 
memory:e4505000-e45057ff
  *-scsi
       physical id: 2
       logical name: scsi1
       capabilities: emulated
     *-disk
          description: ATA Disk
          product: WDC WD3200BEVT-2
          vendor: Western Digital
          physical id: 0.0.0
          bus info: scsi@1:0.0.0
          logical name: /dev/sda
          version: 1A11
          serial: WD-WXA0A89S7895
          size: 298GiB (320GB)
          capabilities: partitioned partitioned:dos
          configuration: ansiversion=5 logicalsectorsize=512 
sectorsize=512 signature=393ecfde


> Do you mind giving a few details about the hardware in question, both
> the laptop and the drive?
>
> Justus