[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Sorry



Too many computers, too many users, to many settings & trying to do to much to fast. That last post was by me.

Teague
OK, a couple of restarts, a couple of retrys and a couple of days later I can now get out to the net, I think. As for my settings, I believe that they are the same. I connect through a router/dsl combo unit, no proxy. I did check my /etc/resolv.conf in GNU to the one in my linux set up & it matches. The only way I could sort out trying the connection is to see is apt-get update works. It seems to connect & download stuff, but then it fails with a Missing PUBKEY error. SO I ma not sure things are working right yet.

Thanks for the reply.
Cheers

Praveen A wrote:
2002/1/1, Teague MacRoot <hdflhtp@bellatlantic.net>:
It seems that I was having hardware issues.  I switched to another
computer & a different hard drive and was able to run the crosshurd
install from my lenny install.  Thank you all for the help.

Cool.

Now, I am unable to get to the internet.  This is the card I have,
Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) which is
on the FSF list of approved cards.  I run  "devprobe eth0" and it found
my eth0, I then ran "settrans -fgap /servers/socket/2 /hurd/pfinet -i
eth0 -a 192.168.1.3 -g 192.168.1.1 -m 255.255.255.0" but still no
internet.  What do I need to do to get the internet up & running?


Are you sure it is the same setting you use fro GNU/Linux, I mean the
IP and gateway? Are you behind a proxy or is it a direct connection?
And how did you test the net connection? You will have to set your
name servers in /etc/resolv.conf if you want ping google.com to work.

Cheers
Praveen





Reply to: