Hey, I tested another ethernet card with an RTL-8139 chipset, but with the same result as my Davicom (tulip chipset):
PCI device 'RealTek RTL8139C Fast Ethernet' was not assigned an IRQ.
For now I think this is not a fault of the card, but with Hurd/Mach or
my system.
Here some informations about my system:
CPU: Pentium 3 1 Ghz
Board: Asus CUV4X-M (via chipset)
HDD: HD0 160GB by Samsung (on this Hurd and Linux are installed)
HD1: 10GB (with Windows)
RAM: 640MB
Ethernet card: Now a RealTek, before a Davicom (more you can read in the
attached logs)
apt-cache give me a more readable version-string: Version: 1:20040915.dfsg.1-1 and uname -a: GNU debian 0.3 GNU-Mach 1.3/Hurd-0.3 i686-AT386 GNU
This is the same. What is the problem? A problem of my hardware or by Hurd/GNU Mach. Some months ago I had some little hardware problems/Linux Kernel problems,now they have been gone. At the moment Linux/*BSD/Windows do not have any problems.
How can I solve the problem? TIA Pierre
GNU Mach 1.3
AT386 boot: physical memory from 0x0 to 0x27fec000
GNU Mach 1.3
AT386 boot: physical memory from 0x0 to 0x27fec000
pcibios_init : BIOS32 Service Directory structure at 0xp
pcibios_init : BIOS32 Service Directory entry at 0xf06b0
pcibios_init : PCI BIOS revision 2.10 entry at 0xf08b0
Probing PCI hardware.
ide: VIA VT82C586B (split FIFO) UDMA Bus Mastering IDE
Controller on PCI bus 0 function 33
ide0: BM-DMA at 0xb800-0xb807
ide1: BM-DMA at 0xb808-0xb80f
hd0: SAMSUNG SP1604N, 131071MB w/2048kB Cache, CHS=16709/255/63
hd1: COMPAQ DVD-ROM DRD-8120B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Failed initialization of WD-7000 SCSI card!
EATA0: address 0x1f0 in use, skipping probe.
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa: SPP port present
ppa: ECP with a i byte FIFO present
ppa: PS/2 bidirectional port present
ppa: Failed Intel bug check. (Phony EPP in ECP)
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
rtl8139.c:v1.23a 8/24/2003 Donald Becker, becker@scyld.com.
http://www.scyld.com/network/rtl8139.html
via-rhine.c:v1.16 7/22/2003 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/via-rhine.html
PCI device 'Davicom DM9102' was not assigned an IRQ.
It will not be activated.
0 3c515 cards found.
eth0: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
via-rhine.c:v1.16 7/22/2003 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/via-rhine.html
PCI device 'Davicom DM9102' was not assigned an IRQ.
It will not be activated.
0 3c515 cards found.
eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
Partition check (DOS partitions):
hd0: hd0s1 hd0s2 hd0s3 < hd0s5 hd0s6 hd0s7 hd0s8 >
com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS COM1)
com1: at atbus1, port = 2f8, spl = 6, pic = 3. (DOS COM2)
module 0: /hurd/ext2fs.static --multiboot-command-line=${kernel-command-line} --host-priv-port=${host-port} --device-master-port=${device-port} --exec-server-task=${exec-task} -T typed ${root} $(task-create) $(task-resume)
module 1: /lib/ld.so.1 /hurd/exec $(exec-task=task-create)
2 multiboot modules task loaded: /hurd/ext2fs.static --multiboot-command-line=/boot/gnumach.gz root=device:hd0s1 --host-priv-port=2 --device-master-port=3 --exec-server-task=4 -T typed device:hd0s1
task loaded: /lib/ld.so.1 /hurd/exec
start /hurd/ext2fs.static: GNU Mach 1.3
AT386 boot: physical memory from 0x0 to 0x27fec000
GNU Mach 1.3
AT386 boot: physical memory from 0x0 to 0x27fec000
pcibios_init : BIOS32 Service Directory structure at 0xp
pcibios_init : BIOS32 Service Directory entry at 0xf06b0
pcibios_init : PCI BIOS revision 2.10 entry at 0xf08b0
Probing PCI hardware.
ide: VIA VT82C586B (split FIFO) UDMA Bus Mastering IDE
Controller on PCI bus 0 function 33
ide0: BM-DMA at 0xb800-0xb807
ide1: BM-DMA at 0xb808-0xb80f
hd0: SAMSUNG SP1604N, 131071MB w/2048kB Cache, CHS=16709/255/63
hd1: Maxtor 91021U2, 9770MB w/512kB Cache, CHS=1245/255/63
hd2: COMPAQ DVD-ROM DRD-8120B, ATAPI CDROM drive
hd3: LG CD-RW CED-8080B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Failed initialization of WD-7000 SCSI card!
EATA0: address 0x1f0 in use, skipping probe.
EATA0: address 0x170 in use, skipping probe.
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa: SPP port present
ppa: ECP with a i byte FIFO present
ppa: PS/2 bidirectional port present
ppa: Failed Intel bug check. (Phony EPP in ECP)
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
rtl8139.c:v1.23a 8/24/2003 Donald Becker, becker@scyld.com.
http://www.scyld.com/network/rtl8139.html
PCI device 'RealTek RTL8139C Fast Ethernet' was not assigned an IRQ.
It will not be activated.
via-rhine.c:v1.16 7/22/2003 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/via-rhine.html
0 3c515 cards found.
eth0: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
PCI device 'RealTek RTL8139C Fast Ethernet' was not assigned an IRQ.
It will not be activated.
via-rhine.c:v1.16 7/22/2003 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/via-rhine.html
0 3c515 cards found.
eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
Partition check (DOS partitions):
hd0: hd0s1 hd0s2 hd0s3 < hd0s5 hd0s6 hd0s7 hd0s8 > hd0s4
hd1: hd1s1
com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS COM1)
com1: at atbus1, port = 2f8, spl = 6, pic = 3. (DOS COM2)
module 0: /hurd/ext2fs.static --multiboot-command-line=${kernel-command-line} --host-priv-port=${host-port} --device-master-port=${device-port} --exec-server-task=${exec-task} -T typed ${root} $(task-create) $(task-resume)
module 1: /lib/ld.so.1 /hurd/exec $(exec-task=task-create)
2 multiboot modules task loaded: /hurd/ext2fs.static --multiboot-command-line=/boot/gnumach.gz root=device:hd0s1 --host-priv-port=2 --device-master-port=3 --exec-server-task=4 -T typed device:hd0s1
task loaded: /lib/ld.so.1 /hurd/exec
start /hurd/ext2fs.static: Attachment:
signature.asc
Description: OpenPGP digital signature