[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Hurd on Bochs 2.1 eth0 problem

  I installed the Hurd from the following link: 

http://eu.hurd.gnuab.org/pub/debian/base/debian-gnu-hurd-2004.05.09.tar.gz

  under Bochs 2.1 running with the configuration
below.  Everything seems to be working, with the
exception of eth0 (Bochs' ne2000 network card).  I
tried rebuilding mach from
http://ftp.gnu.org/gnu/gnumach/gnumach-1.3.tar.gz
with:

$ MIG=i386-gnu-mig CC=i386-gnu-gcc ./configure
--enable-ide --enable-ne2000 --build i386-linux --host
i386-gnu --prefix=/gnu

  and was successful in loading up this mach as well
as the original, but had the same results with the
ne2000 card.  The mach boot messages don't even
mention the ne2000 driver probing the hardware.

  Is there something that needs to be set at
compilation time or an argument to mach at boot time
to force the ne2000 driver to query the hardware and
initialize itself?  Does anyone have this
configuration up and running successfully and could
you share your bochsrc?

bochsrc:

megs: 64
boot: disk
clock: sync=realtime, time0=local
ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01,
ethmod=tuntap, ethdev=tun,
script=/opt/bochs/gnu_mach/start-tun
floppya: 1_44=./1.44
ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
ata0-master: type=disk, path="2Gb.img", mode=flat,
cylinders=4161, heads=16, spt=63
ata0-slave: type=disk, path="128M.img", mode=flat,
cylinders=260, heads=16, spt=63
#log: /dev/null
log: ./bochs.out
vga_update_interval: 250000
keyboard_serial_delay: 200
vgaromimage: /usr/share/bochs/VGABIOS-elpin-2.40
romimage: file=/usr/share/bochs/BIOS-bochs-latest,
address=0xf0000
i440fxsupport: enabled=1

bootlog (original mach):
GNUmach 1.3
AT386 boot: physical memory from 0x0 to 0x4000000
GNUmach 1.3
AT386 boot: physical memory from 0x0 to 0x4000000
pcibios_init : BIOS32 Service Directory structure at
0x000f9540
pcibios_init : BIOS32 Service Directory entry at
0xf9550
bios32_service(0x49435024) : not present
pci_init: no BIOS32 detected
hd0: Generic 1234, 2047MB w/256kB Cache,
CHS=520/128/63
hd1: Generic 1234, 127MB w/256kB Cache, CHS=260/16/63
hd2: Generic 1234, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
qlogicisp : PCI bios not present
eata_pio: No BIOS32 extensions present. This driver
release still depends on it.
          Skipping scan for PCI HBAs.
Failed initialization of WD-7000 SCSI card!
EATA0: address 0x1f0 in use, skipping probe.
EATA0: address 0x170 in use, skipping probe.
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa:     SPP port present
ppa:     PS/2 bidirectional port present
ppa:     EPP 1.7
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
3c59x.c:v0.99L 5/28/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vor
tex.html
0 3c515 cards found.
eth0: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the
printer port
TLAN:   PCI Bios not present.
0 3c515 cards found.
eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the
printer port
TLAN:   PCI Bios not present.
Partition check (DOS partitions):
 hd0: hd0s1
 hd1: hd1s1
com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS
COM1)
module 0: /hurd/ext2fs.static
--multiboot-command-line=${kernel-command-line} --ho
st-priv-port=${host-port}
--device-master-port=${device-port}
--exec-server-task=$
module 1: /lib/ld.so.1 /hurd/exec
$(exec-task=task-create)

2 multiboot modules

                                                      
              task loaded:
/hurd/ext2fs.static
--multiboot-command-line=/boot/gnumach.gz
root=device:hd0s1 --
host-priv-port=2 --device-master-port=3
--exec-server-task=4 -T typed device:hd0s1
task loaded: /lib/ld.so.1 /hurd/exec

start /hurd/ext2fs.static:


bootlog (compiled mach):
GNUmach 1.3
AT386 boot: physical memory from 0x0 to 0x4000000
GNUmach 1.3
AT386 boot: physical memory from 0x0 to 0x4000000
pcibios_init : BIOS32 Service Directory structure at
0x000f9540
pcibios_init : BIOS32 Service Directory entry at
0xf9550
pcibios_init : PCI BIOS revision 2.10 entry at 0xf9590
Probing PCI hardware.
hd0: Generic 1234, 2047MB w/256kB Cache,
CHS=520/128/63
hd1: Generic 1234, 127MB w/256kB Cache, CHS=260/16/63
hd2: Generic 1234, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Partition check (DOS partitions):
 hd0: hd0s1
 hd1: hd1s1
com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS
COM1)
module 0: /hurd/ext2fs.static
--multiboot-command-line=${kernel-command-line} --ho
st-priv-port=${host-port}
--device-master-port=${device-port}
--exec-server-task=$
module 1: /lib/ld.so.1 /hurd/exec
$(exec-task=task-create)

2 multiboot modules

                                                      
              task loaded:
/hurd/ext2fs.static
--multiboot-command-line=/boot/gnumach.gz
root=device:hd0s1 --
host-priv-port=2 --device-master-port=3
--exec-server-task=4 -T typed device:hd0s1
task loaded: /lib/ld.so.1 /hurd/exec

start /hurd/ext2fs.static:



		
__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail
Reply to: